2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

fuel injector question, how do i tell what size?

Thread Tools
 
Search this Thread
 
Old Nov 29, 2001 | 02:15 AM
  #1  
Bill4224's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26
Likes: 0
From: CT
fuel injector question, how do i tell what size?

ok i have some injectors from a 90 motor 13 ohm type the part num on the side is 195500-2010
i also have some injectors from an 87 2.5 ohm type
part number 195500-1350

then i have another set of 2 injectors lieing around which i have no clue what car they came out of 2.5 ohm type
part number 195500-1370

question is does anybody know what sizes these are? i am really interested in the last type (1370).

as in ???CC

please help me out
thanks
bill

Last edited by Bill4224; Nov 29, 2001 at 02:18 AM.
Reply
Old Nov 29, 2001 | 02:18 AM
  #2  
RX-7 GT's Avatar
HyperREV.com
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,162
Likes: 0
From: Oregon
if they are from a turboII they all had 550cc primaries /secondaires all years
Reply
Old Nov 29, 2001 | 02:45 AM
  #3  
BoostedRotors's Avatar
I HATE sleepy eyes
Tenured Member 15 Years
 
Joined: Nov 2001
Posts: 1,180
Likes: 0
From: Birmingham, AL
if they are maroon, they're 550cc....if they're orange, they are 680cc. hope that helps
Reply
Old Nov 29, 2001 | 02:52 AM
  #4  
Bill4224's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26
Likes: 0
From: CT
ok i found the part number matching 1370 to 550cc injectors
if anyone wnated to know.
still wondering about the other 2 part numbers
Reply
Old Nov 29, 2001 | 02:59 AM
  #5  
BoostedRotors's Avatar
I HATE sleepy eyes
Tenured Member 15 Years
 
Joined: Nov 2001
Posts: 1,180
Likes: 0
From: Birmingham, AL
dont worry about the part number...go by the color.
Reply
Old Nov 29, 2001 | 03:22 AM
  #6  
Bill4224's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26
Likes: 0
From: CT
ok well here are the colors

out of the 90 car = silver with ogangy/red top
out of the 87 = black with ogangy/red top
the other 2 that i'm not shure = silver with whiteish/grayish top
Reply
Old Nov 29, 2001 | 05:44 AM
  #7  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
I had(might still have)the same problem. I have a sack of them. The color holds no clue for me. The 1370 and 1350 were both orange as far as I'm concerned. If you know the 1370's are 550 then its almost certain that the 1350's are the 460's. Colors you say? I have some 550's that are purple. So much for color. The way I seperated the 460 from the 550's was to take the secondaries out of their bores and put a measuring cup under them and then apply 12v for a full minute. Measured the amount and seperated the 460's from the 550's. Unfortunatly they got mixed again since then. P.S. How did you determine the 1370's are 550's for sure? Know nothing about 2010's. Here's another opinion on COLORS https://www.rx7club.com/vforums/show...threadid=31937 Go figure!

Last edited by HAILERS; Nov 29, 2001 at 05:50 AM.
Reply
Old Nov 29, 2001 | 07:31 AM
  #8  
larsyoung's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 14
Likes: 0
From: Naples, Florida
195500-2010 - dunno

195500-1350 - 1986-87 non-turbo 460cc 1.5-3 ohm. Color should be brown

195500-1370 - 1986-87 turbo 550cc 1.5-3 ohm. Color should be purple.

This info came from TSB 033/87

Lars
Reply
Old Nov 29, 2001 | 07:38 AM
  #9  
David88vert's Avatar
r71's daddy
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 935
Likes: 0
From: Atlanta, GA
Lars is correct. I will look up the 2010's.
I have a RX7 injector chart, but I don't have it here at work.
Reply
Old Nov 29, 2001 | 08:47 AM
  #10  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
REf LARSYOUNG POST......That right there is why I don't go by color. All the injectors I have are brown to dark brown in color. The -1370's that I have are dark brown. I bought some rebuilt ones a while back from autoparts.com, and they were 550's and indeed were purple. There was no number embossed on them. If I disregard the talk about color, it makes sense to me.
Reply
Old Nov 30, 2001 | 02:42 AM
  #11  
jim_o_rama@hotmail.com's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 7
Likes: 0
From: Montreal
I've got a set of 195500-2010.

They're supposed to be coming from a 2nd gen n/a(460cc).

Need to verification.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM
86rxNa
2nd Generation Specific (1986-1992)
2
Aug 11, 2015 11:51 AM




All times are GMT -5. The time now is 03:02 AM.