http://www.racelogic.co.uk/?show=Tra...ustable_System and http://www.racelogic.co.uk/?show=Tra...gital_Adjuster

The base unit already includes Launch Control, as set up by RaceLogic. So the only way to save money is to skip the digital controller and get the unit w/ the standard Analog controller. I don't recommend it though...

Paid

Juiceh - 2 6 cylinders
legendrx7
aoc007 - 6 cylinder
Christopher - 8 cylinder ***$5 short
chillin_rx7_guy - 6 cylinder ***$5 short
warick101 - 8 cylinder
Min - 6 cylinder ***$5 short
Hifd - 6 cylinder
Max_Spd - 6 cylinder
mdude - 6 cylinder

Don't forget those echeck fees guys.

Hey guys,

I wanna clarify something. The prices posted were assuming 20 orders. We had 19 plus a few solo digital controllers. If we don't reach 20 or at least VERY close (18 or 19), the price WILL go up, because the 20 mark was an additional price break. So if you guys wanna maintain the current GB discount, I'd strongly suggest you get on the other ppl who posted interest in this thread to come through...

~Ramy

DOH!

Didn't some people post this on Surpaforums and some other sites?

Juiceh, that's not the problem. It's that people are always quick to express interest, but not very keen on following through.

Yeah people come on, if you said you wanted to order one pay up. This doesn't just affect you it's all of us in the Group Buy....

So Ramy, you haven't purchased the units, correct?

Will you buy them before it hits 20 or are you going to wait?

If you can't hit 20 buys, how much would it be?

Thanks

Mike (I'll send the $5 shortly)

Mike, I make it a policy to ensure everything is 100% prepaid before I make the purchase, as I've been hung out and left to dry one too many times by ppl who flaked on me after I already made a purchase for them.

As for the "what if's," I prefer to deal with hypotheticals when they become a reality. So lets deal w/ the cards as they lay for now.

Thanks,
~Ramy

Ok so am I correct in the following!!!

***These are the people who showed interest but have not paid yet!!!***

1) calculon - 3-rotor, Launch Control, Full Throttle Shift, and Digital Adjuster
4) gooroo - 2-rotor, Launch Control, Full Throttle Shift, and Digital Adjuster
5) Str8ryd - 3-rotor, Full Throttle Shift, and Digital Adjuster (NOT sure about this ABS issue...)
6) stickmantijuana - 3-rotor, Launch Control, Full throttle shift, and digital adjuster
7) hyperion - V8 LS1 ABS version, Launch Control, Full Throttle Shift, Digital Adjuster, and Datalogging
9) rxcited2 - 2-rotor ABS version, Launch Control, Full Throttle Shift, Digital Adjuster, and Data Logging
10) neit_jnf - 2-rotor, Launch Control, Full Throttle shift (The unit can be programmed with a laptop right? the digital adjuster is just for instant adjustments and display and is not needed for operation?)
11) Ernie T - 2-rotor, Launch Control, Full Throttle Shift
14) Trout2 - 2-rotor, Launch Control, Digital Adjuster, Full Throttle Shift, & Data Logging
17) rebo0t - honda 4cylinder ABS version, Std. Adjustable Traction Control unit, only Data Logging
18) sk8erpunk1983- 2-rotor, ABS version, Launch Control, Digital Adjuster, Full Throttle Shift and Data logging (Price Pending)
20) Asleep - Digital Adjuster only (Price?)


***Extra People who paid that were not on the original list***

Christopher - 8 cylinder ***$5 short
Min - 6 cylinder ***$5 short
Max_Spd - 6 cylinder

looks like i am sending another echeck unless some of the interested people start purchasing.

Still interested.

If I pay the GB price and it does not go through.

Can I opt for a refund, with a restock fund (to cover your losses)

I know how the parts sales world works... and sometimes this kind of crap happens.

Please let me know.

thanks.

Don't worry about me, as I am ordering two units. I am no flake :)

I'll be paying over the weekend, before the deadline. My bank account is recovering from the Exedy clutch group buy a couple of weeks ago.

Jack

:rofl: Sorry! :angel:

Clear out your PM's Ramy... I'll be paying shortly as it took a while for the refund to clear. Unfortunately, it looks like I cannot send an E-Check using my paypal balance (where the refund resides). Unless you guys know something I don't, I'm going to have to pay the paypal instant transfer price. LMK.

-- James

Paid
 

OK, think I got it. I initiated a transfer back to my checking account. This will take 3 - 4 business days, but the E-Check takes that long to clear too. There is adequate funds to cover the E-Check even if that comes through before the transfer. So I think I have officially PAID (including $5 E-Check fee BTW). LMK if there are any problems!!

Echecks must come from your bank account. So you need to transfer the funds back to your bank account, wait a couple days for that to clear. Then redo the echeck, and wait a few more days for that to clear again. Kinda sucks but its the only way. Echeck from the paypal balance would kick ass, but that would just be too easy right?

.

LOL, remember back when we were bank rolling this operation? Combined we had 30k+ in parts we fronted the money for. There were times when I didn't think we would turn enough JDM parts to buy groceries. Then Juiceh started signing his paychecks over to us and everything worked out....

He did, but he didn't include his user name so I listed his first name instead. rxcited2 is going to pay and str8ryd is one of our best customers.

thanks jason. he seemed very interested i would've thought he paid.

echeck fee sent.

One question about the $5 I owe you Ramy.

If I sent you an e-check for $5, do I need to include more to cover the second e-check I'm sending?

Thanks

Mike

*Fixed*
http://smiliesftw.com/x/anubis.gif http://smiliesftw.com/x/2oho.gif

Nope, echeck takes the standard $0.30 + 2.9% up until the fee reaches $5 after which the $5 fee is used. Sending $5 is enough.

Just found this out!!!

I'm considering about a kit. I have one quick question.

If I buy 6 cylinders kit and use it w/ 6 cylinders engine, then Will I lose the full throttle shift feather? As, from my understanding, there would be no free port left to configure the feature.

Anyone who knows for sure, please let me know. Thanks!!!!

Don't worry about me guys, I am just waiting for the funds from my paypal to be transfered into my bank. Then I can send an eCheck payment. Its retarded but I am for sure ordering 2units.

???

Hey guys, sorry for the delay in payment. I was just waiting for an issue to be settled with my account.


BlueRex: I'll be sending payment sometime over the weekend before the GB closes. I also need to send Ramy a payment for something else. I'll send two seperate payments and PM you with the details of both.


FDNewbie: Hey Ramy, you think there's anyway we could possibly just extend the GB if we can't get the 18-20 people we originally had to pay? I don't know how much the price increase will be, but if it's significant I'm not sure I would want this for the time being. Maybe take it in to consideration??

NO, you do not loose full throttle shift capability. The idea was to use one of the extra wires (say you're using 4 out of 6 like a two rotor), remove it from the harness, and reinstall it in the FTS pinout. If they don't provide you with the extra wire, then you might need to get creative, but the FTS feature will be there, even if you use all 6 injector control wires.

Would you guys hurry up and pay so I can get mine already?!?! I'm kind of in a hurry, I might actually get my car running in 6 months or so...:D

+1
I'm so excited to get this installed in my cars.

Yes. We RXCITED!

Price ended up being too high for me at this time, sorry all.

anybody in or around the central texas area who will be getting one installed on their fd? if so, i may join in as long as i know that i can get mine installed with reasonable effort & cost. feel free to send me a pm if so. thnx in advance. r.c.

It all goes in the same account, so you can just send a single payment and note in the Paypal notes section what the amount breakdown is, and for what.

I don't mind, but I'd like to hear what others on the GB say before making such a decision.

So ppl can make informed decisions, the price would go up 5% should I get less than 20 (18 or 19 minimum) orders. It's a different price bracket, and I was squeezing into the 20+ orders slot by compensating w/ a few extra stand-alone digital adjusters, and some negotiating finesse lol.

GothamRacing.com has installed a few, and the owners were pleased with the results.

How close are we to the minimum now?


You've been waiting a LONG time to do that haven't you?

As far as I know, we are missing 2 more orders. I am waiting for my paypal to be done with the transfer then you'll have your 2 orders.

Payed!!!

last day to get in. hopefully we have enough buyers

E-check payment sent.

I said like 100 times I'm MIN.

I paid the e-check fee with the instant transfer. Everything should be set.

Please confirm.

JUST made it.........:D


Jason, please confirm you received my payment. I did as Ramy requested and sent a single payment for the RaceLogic Unit w/Accessories and the previous balance I owed him.


Thanks a TON Ramy!! It seems I'm on repeat and have probably said that tooooo many times already, but I mean it man. I appreciate it.


Later Buddy,

Rizwan

Payment sent. I was out riding my new motorcycle :)

If I can still pay, I will do so today, please let me know if this is still going through and if I can still get in. I am without excuse. . .just completely spaced it.

Please let me know. Thank you.

Send your Payment!!! As some others sent theirs and e-check needs time to clear...it will be fine with all of us as long as we reach the magic 20 :)

BlueRex,

Please confirm payment rec'd when you get a free moment; RLTC6AL + RR Software @ $1,244 total.

Thnx!

R.C.

BlueRex or Ramy,

Please let me know if I ought not bother pay now due to my own negligence in calendar management.

Thanks

I'm pretty sure the GB is still open until they have posted otherwise.

Besides, it appears that those that have paid already wouldn't mind keeping the GB running till we get the needed amount of orders to make the price cut.

Yup, I don't mind at all. I'd like to reach our intended goal of 18-20 people for this GB.