interested
 

I read someone's post earlier in this thread, I have 35w ballasts already, is there still a possibility of getting the housings? still interested either way.

Is it a d2s socket? What is the input socket for power? Basically we would give you the harness and say good luck, hope you can make it work. We also can't warranty it if you use your own parts. The cost savings for using your own ballasts would save maybe 60 bucks? (guestimate). As I stated in the FD thread, we buy many of the parts together in bulk, and once the quantities change the price per part for that kit is then ala carte so you dont end up saving much in the long run.

Bad news for fb :(
 

Ah well, thanks for trying anyways. Do you think it is possible that a projector from another type of vehicle might work for the fb without any cutting?

thanks

does this change pricing for us fc guys? does it mean you will still be running it for us?

I am really bummed out now my entire day is shot, Thanks
At least you were test fitting them and not just cranking them out and saying good luck. so the FB is still in the dark and our best option is prob the hella upgrades or something like them.

I appreciate all the hard work/effort in this and still look forward to seeing more Great products from SAKEBOMB GARAGE but since the lights for us FB guys didn't work out we need something to look forward to,so what sort of projects are you still wanting to do?

Well we may try a shorter projector but honestly, they are just too deep for the FB as the buckets fold up flat onto the vertical frame rail. If you want to take a hole saw to your frame rail they should fit... but most people wont want anything to do with that so the FB project will probably just get the axe.

The FC lights fit great and we are going ahead with them. We'll open up the FC groupbuy in the next day or so. :icon_tup: :egrin: I'm slowly writing it now at 2am lol. I'll make sure it won't change pricing... if we have to eat the extra cost, or build the rear shrouds by hand so be it. $799 or bust. We'll come through
-Heath

I think im gonna go ape shit.

:( That sucks that the design of the FB won't allow for a HID retrofit. Thanks for trying.

Yeah I'm not into boring holes into my FB. what other projects you working on for the FB?

I mean it will but not without punching a hole to clear the rest of it. :icon_tdow

Interested
 

Nice, im interested in these if my car is running good in the next few days and if i can get the extra dough theres a good chance i might be in on this for the FC
:icon_tup: good stuff.

wow
 

so right now there are not setups for the FB?:scratch:

Ohh
 

Okay now I see, That really sucks!! but hey people like you can probably figure something out for us..lol :icon_tup:

pricing
 

I think you get what you pay for, if your changing a tire in the dark I would love to have that 400 dollar flashlight, you can see a whole lot better...lol :icon_tup:

The FC lights fit great and we are going ahead with them. We'll open up the FC groupbuy in the next day or so. :icon_tup: :egrin: I'm slowly writing it now at 2am lol. I'll make sure it won't change pricing... if we have to eat the extra cost, or build the rear shrouds by hand so be it. $799 or bust. We'll come through
-Heath[/QUOTE]



Whats the word?

Whats the word?[/quote]

Sorry guys I've been unbelievably busy. I'll have it up tomorrow (err today... i just realized its 3am). :icon_tup:

I have half of the money saved up so far. I need these lights in my car. I hope the sell happens in the near future.

The official Group Buy Thread is up :D --> HERE

All new info will be updated in that thread

Show me an action shot of the actual FC kit and the Paypal will be sent!

Action shot as in what? The lights in the car? the projectors running? I did the test fit on the car, they fit. The projectors themselves are identical to the FD projectors. I was lucky enough to meet red dragon for an afternoon to do the test fitting, and they fit without modifications to the bucket. :icon_tup:

It's ok to ask questions in the new thread but lets move all new comments/questions to the new thread. :)

Thanks, Heath

other than the bezeled shield around the projector (which i know is important),whats the difference bw yours and ebay projectors

beam width, evenness of the light, throw, output intensity, optical clarity of the lens, cutoff sharpness, hi-beam solenoid quality if it even has one (depending on the ebay projector you are looking at) etc etc. The FXR projectors are light years beyond the ebay ones. The projectors we use are on par with mercedes, lexus, jag, lighting. (The bezel actually serves no functional purpose... just there for looks)

RotorMotor,

Could you let me know what all would be involved with getting the miata setup to work? Possibly pictures to see what one would be cutting? I've got a bastard child SA and have no qualms cutting if needed. Just want to see what all is involved.

I dont have pics for you unfortunately. The actual bucket needs to be cut with say a hole saw, and the frame rail behind it needs to be cut as well, so that when the lights fold down the cross support. The group buy we are running currently is ONLY for FC lights. We are working with the miata community to possibly offer the lights for the miata, but as of now that is on hold for other projects. Please feel free to check in for the status of the miata setup.
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">