GB Closed: Complete 99Spec Parts GB!
#431
Senior Member
Join Date: Sep 2003
Location: Scottsdale, AZ
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
#432
Rotary Freak
Join Date: Sep 2004
Location: Bay Area, CA
Posts: 2,444
Likes: 0
Received 0 Likes
on
0 Posts
Lots of stuff went out early this week. Please update what is owed to you in the list so I can stay on top of what parts need to be taken care of (fogs are still in the works).
Will, I had all your parts sent to the buyer's address that you gave me. You may want to check with them in a week or so to make sure it all arrived.
Edgar, I received an estimate of the end of Jan for the bumper skin. A good amount of the parts should have been shipped out to your early this week.
Thanks for your patience guys.
Will, I had all your parts sent to the buyer's address that you gave me. You may want to check with them in a week or so to make sure it all arrived.
Edgar, I received an estimate of the end of Jan for the bumper skin. A good amount of the parts should have been shipped out to your early this week.
Thanks for your patience guys.
#433
Senior Member
iTrader: (4)
Join Date: Feb 2004
Location: South SF, San Bruno, Petaluma, Bay area
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Hi
Please check my order please. I got 1 shipment on 9/17 and Ramy said that I should be recieving the remaining parts soon. I spoke with him via email on 10/29 and He said I should have received the parts long time ago and he would find out what was going on and get my parts to me asap. Normally im not in such a hurry but the car is all prepped and wasting shop space. My paint guys are getting upset with me as well. Please check and advise. Thanks
Please check my order please. I got 1 shipment on 9/17 and Ramy said that I should be recieving the remaining parts soon. I spoke with him via email on 10/29 and He said I should have received the parts long time ago and he would find out what was going on and get my parts to me asap. Normally im not in such a hurry but the car is all prepped and wasting shop space. My paint guys are getting upset with me as well. Please check and advise. Thanks
#434
Rotary Freak
Join Date: Sep 2004
Location: Bay Area, CA
Posts: 2,444
Likes: 0
Received 0 Likes
on
0 Posts
Did anybody receive stuff from the 11/30 ship date? If not it may have ended up in the 12/13 ship date. Please let me know when you receive stuff so I can keep on top of what's still owed.
Also, this thread is intended for the participants of the GB, which is why questions from non GB participants are not answered. Please direct your questions to Ramy if you were an individual order.
Also, this thread is intended for the participants of the GB, which is why questions from non GB participants are not answered. Please direct your questions to Ramy if you were an individual order.
#438
Lives on the Forum
iTrader: (8)
I believe I received the OEM Combos + KS Harness. KS Hardness is those little wire plugs right? Also thanks for the $94 UPS Customs fee...
toyzzzz - order complete
jlblue - order complete
caredden
RotorMotor - fogs, undertray
aoc007 - oem combos + knightsports harness, fog lights, sidemarkers, undertray
thewird- OEM Fog Lights, Fender Sidemarkers, Oil cooler/brake ducts [I received one (F138-43-63XB), so I believe I need another for the other side]
syclone_jak - undertray
Joel
pwwatkins - I still need one side of the front lip and oil cooler ducts
ejcabrera-recieved oem combos but did not order them. so i pretty much still need everything front bumper w/ plate, rebar, chin spoiler, fender side markers, under tray, oil cooler and brake ducts, 2 flying m emblems.
wiblergt - order complete
magicjc - 99 Spec Rear Wing in Silver
toyzzzz - order complete
jlblue - order complete
caredden
RotorMotor - fogs, undertray
aoc007 - oem combos + knightsports harness, fog lights, sidemarkers, undertray
thewird- OEM Fog Lights, Fender Sidemarkers, Oil cooler/brake ducts [I received one (F138-43-63XB), so I believe I need another for the other side]
syclone_jak - undertray
Joel
pwwatkins - I still need one side of the front lip and oil cooler ducts
ejcabrera-recieved oem combos but did not order them. so i pretty much still need everything front bumper w/ plate, rebar, chin spoiler, fender side markers, under tray, oil cooler and brake ducts, 2 flying m emblems.
wiblergt - order complete
magicjc - 99 Spec Rear Wing in Silver
#440
Rotary Freak
Join Date: Sep 2004
Location: Bay Area, CA
Posts: 2,444
Likes: 0
Received 0 Likes
on
0 Posts
#441
Senior Member
iTrader: (5)
Join Date: Dec 2005
Location: SF Bay Area, CA
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone installed or figured out how to install the series 8 foglight on a R1 or other series 6 FD that did not come with foglights originally? I looked in my center console and the dash wiring harness does not seem to be universal, i.e. there's not plug for a foglight switch so I either have to route a custom wire or purchase and install a touring/pep(g) interior dash harness. Also the bumper seems to require a small wire that plugs into the main wire which routes around the engine bay, but I think this may be universal and simple plug and play.
And relocating the sidemarkers to the fenders seems easy, extending the wires, but maybe those of you who have done it already or already planned how to do it can post notes.
-Andy
And relocating the sidemarkers to the fenders seems easy, extending the wires, but maybe those of you who have done it already or already planned how to do it can post notes.
-Andy
#442
Andy, re: the sidemarkers, hopefully you'll find this helpful... On that note, I would NOT recommend trying to cut the fender for the sidemarker yourself. The sidemarkers have no provisions to be held in, so if the hole is even a TINY bit too large, you'll need a new fender (or superglue lol). I'd rather a bodyshop take that risk, so if THEY mess up the fender, THEY replace it, not ME
And w/ that...I'm off to bed (finally)
~Ramy
And w/ that...I'm off to bed (finally)
~Ramy
#447
DRIVE THE ROTARY SPORTS
iTrader: (5)
Join Date: May 2003
Location: CA (Bay Area)
Posts: 4,150
Likes: 0
Received 0 Likes
on
0 Posts
gah! i want a set...... how much? my fenders are dented and i have to cut the holes still.... buying new will kill 2 birds with stone (im guessing an expensive stone? diamond? ramy you accept diamonds as payment? )