GB Closed: Complete 99Spec Parts GB!
That's right guys...due to popular demand, FDNewbie Imports is bringing to ya a complete 99Spec parts GB!
***Being that the GB is centered around the purchase of the front bumper, as long as you purchase the front bumper, you'll be paying a flat shipping rate of $120 on shipping, regardless of what else you purchase with it. Ie, pay shipping ONCE, regardless of how many front end parts you buy ;))*** - Front bumper = $400 - Rebar = $400 - Chin Spoiler = $169 - OEM Combos + KS Harness = $335 - Replica combo lights = $205 - OEM Fog Lights = $300 - Fender Sidemarkers = $60 - Undertray = $120 - Oil cooler/brake ducts = $120 - 99spec wing = $835 (prepainted in the OEM color of your choice) - 99spec Talights: $425 Please note that all parts are OEM originals unless otherwise specified. More specialized and harder to find 99spec part such as sideskirts, 17" rims, armrests, steering wheels, and interior clusters are also available, but on an individual order basis. Special pricing IS available for those participating in this GB who also wish to purchase any one of these rarer parts. Thanks! ~Ramy FDNewbie Imports Payment instructions here: https://www.rx7club.com/showpost.php...3&postcount=66 |
-OEM Combos + KS Harness = $335
- Replica combo lights = $205 Are you talking about the turn signals? |
i need undertray and brake/cooler ducts. Pm me w/ details. G
|
ramy, is this the absolute BEST that you can do on pricing?
just wondering cause i was comparing prices @ XXXX and XXXX for their bumper kits (front bumper, rebar, directional lights, and lip) for $1325, and $1327 respectively. Yours came to $1304 which is better, but ultimately only a 20 dollar difference over the other shops. is there anyway to get the price any lower? thanks, heath |
Originally Posted by 7_rocket
-OEM Combos + KS Harness = $335
- Replica combo lights = $205 Are you talking about the turn signals?
Originally Posted by G's 3rd Gen
i need undertray and brake/cooler ducts. Pm me w/ details. G
Originally Posted by RotorMotor
ramy, is this the absolute BEST that you can do on pricing?
just wondering cause i was comparing prices @ XXXX and XXXX for their bumper kits (front bumper, rebar, directional lights, and lip) for $1325, and $1327 respectively. Yours came to $1304 which is better, but ultimately only a 20 dollar difference over the other shops. is there anyway to get the price any lower? thanks, heath XXXX front end #1: (Bumper, Replica Turn Lamps, Chin spoiler, and Rebar) = $1325 XXXX front end #2: (Bumper, Replica Turn Lamps, Chin spoiler, and Rebar) = $1327 FDNewbie Imports front end: (Bumper, Replica Turn Lamps, Chin spoiler, and Rebar) = $1174 I pretty much quadruple checked the math, so I'm not sure how you're getting your #s... :scratch: I think what you're doing is comparing my front end price using genuine OEM combo lights to their front end prices, which use non-oem replica combo lights ;) Also, please note that this is PRIVATELY OWNED webspace. Ie I pay for this section of the forum. So mention of other vendors is NOT allowed - especially competing ones ;) But nonetheless, I think I'm still beating everyone's price :D Thanks, ~Ramy |
i am interested in getting the front bumper , chin spoiler, oem combos+ks harness, tail lights
but i am wondering what the hell the rebar, undertray is.. can u email me a pic of those to cgale_19@hotmail.com? btw.. i agree with ramy.. dont insult him.. if you had questions like that send it in a pm or email.. this his his paid webspace. |
How quickly can you get the oil cooler ducts?
|
The reinforcement bar is the fiberglass bar that sits behind the bumper. It's made to take those 15 mph impacts without transferring the impact force to the front frame bar of the car.
As for the undertray, it's the black plastic piece that covers the bottom of the engine, while providing air passages for air to escape the radiator and exit underneath the engine bay. Unfortuantely, I do not currently have pictures of the undertray, but here is a pic of the 99spec rebar (in white): http://img.villagephotos.com/p/2004-6/751536/re-bar.jpg
Originally Posted by herblenny
How quickly can you get the oil cooler ducts?
Thanks, ~Ramy |
thanks Ramy.
how long is the GB going to be open? (when do i have to place my order and send my cash in by) |
NP :)
As for time frame, typically I leave GBs open for 2 weeks or so, enough to generate a good amount of interest. |
Ramy,
Is it possible for you to ship to Dhaka, Bangladesh? If so, what are your modes of payment? We don't have paypal in Bangladesh. Can only do account transfer. Will e-mail you @ fdnewbieimports. Am interested (BUT all depends on how we can workout currency transfer and shipping mode). 1. front bumper 2. chin 3. rear tail lights Shipping costs? $120 flat will bumper, can you workout how much for Dhaka, Bangladesh? Will it be more expensive or cheaper? Thanks Tahmid |
Tahmid, definitely email me to work out the details, but in short, yes I can definitely ship to you. I've shipped parts all over Europe, Asia, and even Australia/New Zealand...so it shouldn't be a problem :) I'm certain it will cost more, however.
~Ramy |
Originally Posted by FDNewbie
Please consult http://fdnewbieimports.com/products.php for product name, pictures, and descriptions (that way there's no miscommunication).
If you'd like to place an order, please use our Orders page on the website (www.FDNewbieImports.com), and we'll take care of it. I do not conduct business via PMs. Actually Heath, here's my math... XXXX front end #1: (Bumper, Replica Turn Lamps, Chin spoiler, and Rebar) = $1325 XXXX front end #2: (Bumper, Replica Turn Lamps, Chin spoiler, and Rebar) = $1327 FDNewbie Imports front end: (Bumper, Replica Turn Lamps, Chin spoiler, and Rebar) = $1174 I pretty much quadruple checked the math, so I'm not sure how you're getting your #s... :scratch: I think what you're doing is comparing my front end price using genuine OEM combo lights to their front end prices, which use non-oem replica combo lights ;) Also, please note that this is PRIVATELY OWNED webspace. Ie I pay for this section of the forum. So mention of other vendors is NOT allowed - especially competing ones ;) But nonetheless, I think I'm still beating everyone's price :D Thanks, ~Ramy As far as my vendor faux pa, i apologize. i know you to have some of the best pricing around and that youre always upfront and honest... so i didnt feel out of line asking about comparisons to other vendors. and as always you cleared things up and brought some of the other vendors practices to light. i would have assumed that everyone used mazda parts, and it seems that youre the only vendor to be upfront and inform us that we have a choice. and yes, comparing prices with OEM parts you blow everyone out of the water!!!! so in conclusion, im most definately in on this GB (especially now that i KNOW what im getting for my $$). so i have 2 last questions... do i need to order any mounting hardware for the front end, or is everything there to attach all the bits together? and secondly, can you do GB pricing on some rear mud flaps in IBM, cause ill be needing some of those as well ;) thanks as always, ramy.... just keepin you on your toes :biggrin: -heath |
Originally Posted by FDNewbie
Tahmid, definitely email me to work out the details, but in short, yes I can definitely ship to you. I've shipped parts all over Europe, Asia, and even Australia/New Zealand...so it shouldn't be a problem :) I'm certain it will cost more, however.
~Ramy |
Originally Posted by RotorMotor
hey ramy, honestly i had NO IDEA that the prices from the other stores were for REPLICA signals. that makes a BIG difference!!
As far as my vendor faux pa, i apologize. i know you to have some of the best pricing around and that youre always upfront and honest... so i didnt feel out of line asking about comparisons to other vendors. and as always you cleared things up and brought some of the other vendors practices to light. i would have assumed that everyone used mazda parts, and it seems that youre the only vendor to be upfront and inform us that we have a choice. and yes, comparing prices with OEM parts you blow everyone out of the water!!!! so in conclusion, im most definately in on this GB (especially now that i KNOW what im getting for my $$). so i have 2 last questions... do i need to order any mounting hardware for the front end, or is everything there to attach all the bits together? and secondly, can you do GB pricing on some rear mud flaps in IBM, cause ill be needing some of those as well ;) thanks as always, ramy.... just keepin you on your toes :biggrin: -heath
Originally Posted by tahmid
Thanks and e-mailed you.
~Ramy |
How much for the Fender Sidemarkers in clear? I'm assuming that the ones you have quoted are for the amber.
|
Prob like $105. And they're REAL nice too :)
|
Great, then hook me up with one. :)
|
If it's part of the GB, just make sure you specify it. If not, email plz ;)
|
Can we see a pic of the oil cooler/brake ducts? I couldn't find it on your site.
|
Hi Ramy, how much for armrests?
|
quick question before I order, will the oil cooler brake ducts work with aftermarket mocal dual oil coolers or will I to fabricate some?
|
Originally Posted by toyzzzz
quick question before I order, will the oil cooler brake ducts work with aftermarket mocal dual oil coolers or will I to fabricate some?
|
K, I emailed you FDNewbie just now about the '99 chin lip. I will pay for that whenever I hear back from you. I hope to get by mid of next week (before March 7th....). And you take PayPal only...no Amex, mastercard, etc?
tC |
^^^
I am pretty sure Ramy's paypal account will accept any form of payment. You can select a credit card as YOUR primary mode of payment on your paypal account... |
All times are GMT -5. The time now is 06:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands