View Poll Results: What is hard to get in Europe or too expensive
Exhaust parts (downpipe, midpipe, catback, muffler)
6
31.58%
Internal engine parts (rebuild kits)
8
42.11%
External engine parts (flywheels, clutches, pulleys, alternators, other accesories)
3
15.79%
Wheels, tires, wheel spacers, wheel studs
3
15.79%
Suspension parts (shocks, coilovers, springs, c/c plates, sway bars)
6
31.58%
Aero parts (body kits, wings, spoilers)
8
42.11%
Electronics (fuel/boost/ignition computers, EMS)
4
21.05%
Brakes (brake rotors, pads, big brake kits, brake lines)
1
5.26%
Transmission/Differential parts, (shifters)
4
21.05%
Radiators/intercoolers/turbos/bov's
5
26.32%
Multiple Choice Poll. Voters: 19. You may not vote on this poll
What parts u need and have hard times to get in Europe
#27
Senior Member
Bosch injectors
Originally posted by hIGGI
Bosch injectors and fuel pumps are made here in Czech Republic......working on getting them for wholesale prices or cheaper
Problem is every bosch parts dealer here will ask you first : for which car is that made ?
They can`t understand that there are universal parts around .....
Bosch injectors and fuel pumps are made here in Czech Republic......working on getting them for wholesale prices or cheaper
Problem is every bosch parts dealer here will ask you first : for which car is that made ?
They can`t understand that there are universal parts around .....
I am very intersted in buying large injectors (1200-1600cc) for a good price. Last i bought from a friend who had imported 1600 from Puerto Rico, they were 110 Euro each. Reason i ask this is becausse i am buildin 4 streetported FD engines this winter which are goin to be single turbos (Garrett To4e and Greddy T-88) so ireally need larger ones. Hope you can help me! Thanks in advice: Lars
#32
Originally posted by RETed
http://www.musclemotors.com/mustang/mustang.htm
Left side, drop down menu "Induction"
Change to "Fuel System"
Scroll a little down to "Fuel Injectors"
"SVO Bosch 160lb injectors $475" - that's for a set of EIGHT
-Ted
__________________
reted_2000@yahoo.com
Technical Advisor
FC3S Pro http://fc3s-pro.com/
http://www.musclemotors.com/mustang/mustang.htm
Left side, drop down menu "Induction"
Change to "Fuel System"
Scroll a little down to "Fuel Injectors"
"SVO Bosch 160lb injectors $475" - that's for a set of EIGHT
-Ted
__________________
reted_2000@yahoo.com
Technical Advisor
FC3S Pro http://fc3s-pro.com/
#33
Senior Member
1600cc injectors
I shall check with some persons who might need these injectors for some FDs and a 20B. At least i need 8, but maybe more. How much do you think the freight to Sweden costs? I don't want to pay the custom (25%). Is it possible to get some 1200-1300cc injectors for the same price? Hope you will come to Sweden some time and check out some Swedish rotaries. We have a meeting at Mantorp Park on the 1 of May!
#34
i am not able to offer your 1200-1300 injectors now, but if u are going to be using standalone EMS u should have not problem to use 1600's
i never been in sweden yet, but i will try to go there sometime
about customs, once i will get all stuff here, i should be able to mail them to you by Czech air mail and it should go thru without customs/taxes.....
btw..stock FD's and 20B's are using side feed, those are top feed injectors used in FC's and such....
$60 a piece is price in USA, price i will sell them for to you will include shipping from vendor to my cargo agent (in USA) + shipping from USA to CZ + shipping from CZ to Sweden....and i don`t know what price it will be untill they will be here in CZ
U could try to get them directly from vendor i listed, but expect to pay yours taxes at full then....
i never been in sweden yet, but i will try to go there sometime
about customs, once i will get all stuff here, i should be able to mail them to you by Czech air mail and it should go thru without customs/taxes.....
btw..stock FD's and 20B's are using side feed, those are top feed injectors used in FC's and such....
$60 a piece is price in USA, price i will sell them for to you will include shipping from vendor to my cargo agent (in USA) + shipping from USA to CZ + shipping from CZ to Sweden....and i don`t know what price it will be untill they will be here in CZ
U could try to get them directly from vendor i listed, but expect to pay yours taxes at full then....
#35
OBEY YOUR MAZDA
Re: 1600cc injectors
Originally posted by Lasse wankel
We have a meeting at Mantorp Park on the 1 of May!
We have a meeting at Mantorp Park on the 1 of May!
Have the raceday at Kinnekulle changed to Mantorp, or are you swedish owners just hardcore when it comes to meeting other rotary-owners?.
OC94Rx7 and I are going to the swedish/danish club meeting at Kinnekulle, if that still is the plan, someday in june from what we have heard.
Kim
#36
Senior Member
iTrader: (5)
Join Date: Jan 2002
Location: Texas
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
I thought SVO from Ford motorsport sold a 1600 injector kit which was 8 of them and if you did the math it came out to like 60 dollars for each injector, btw did you get the mirrors from tony?
#37
Originally posted by javrosario
I thought SVO from Ford motorsport sold a 1600 injector kit which was 8 of them and if you did the math it came out to like 60 dollars for each injector, btw did you get the mirrors from tony?
I thought SVO from Ford motorsport sold a 1600 injector kit which was 8 of them and if you did the math it came out to like 60 dollars for each injector, btw did you get the mirrors from tony?
yeah, i got mirrors, thanks
and if those SVO injectors are what we talk about ;o)))
#38
Racingbeat dealer
Join Date: Dec 2002
Location: Uden (AFB Volkel), The Netherlands
Posts: 787
Likes: 0
Received 1 Like
on
1 Post
HIGGI
These... Dual belt rotorshaped alternator pulleys
Are these pulleys underdriven? or are they the same diameter as original?
And is the added rotary shape not disturbing balance?
Total costs for shipping one to the Netherlands ?
greetz!
Mireck
These... Dual belt rotorshaped alternator pulleys
Are these pulleys underdriven? or are they the same diameter as original?
And is the added rotary shape not disturbing balance?
Total costs for shipping one to the Netherlands ?
greetz!
Mireck
#41
Lives on the Forum
I have people still bugging me about this double pulleys.
Both for FC and now a lot are asking for FD application.
You making for FD too?
I still want to work with you on that cast aluminum S5 thermostat cover!
-Ted
Both for FC and now a lot are asking for FD application.
You making for FD too?
I still want to work with you on that cast aluminum S5 thermostat cover!
-Ted
#42
TED! Email me or catch me on icq/aim/ym/msn so we can talk, or email me when i can catch you on irc.
About pulleys, i slowly sold out what i had in stock and had no extra funds to make another run. I get inquiries about them from time to time, but its not that much to convice me invest in making another ~100 of them (probably 40FC, 60FD?)
About pulleys, i slowly sold out what i had in stock and had no extra funds to make another run. I get inquiries about them from time to time, but its not that much to convice me invest in making another ~100 of them (probably 40FC, 60FD?)
#44
Originally Posted by ArmyOfOne
I would like to have a couple of front and rear 86' N/A 6 port euro spec side housings. and a couple of decent rotor housings for the drag racing season.
If you have a couple of euro spec 6 port lower intake manifolds. I would be interested in those too.
If you have a couple of euro spec 6 port lower intake manifolds. I would be interested in those too.
#45
Lives on the Forum
One thing I need right now is lower perches for Koni front inserts.
I can't find a nice set of front shocks I can hack up, and other people want crazy money for something I'm going to cut up!
Paul Ko @ K2RD was thinking about making these, but those projects are all dead in the water.
I would be willing to pay good money for a set of nice lower mounts for the Koni front inserts.
How much for a pair of CNC'd units would cost?
I'll drop you an email later - too much stuff right now!
I've got a customer with an E8 I'm tuning now that I'm trying to finish up.
That winter rally pics looked super fun!
-Ted
I can't find a nice set of front shocks I can hack up, and other people want crazy money for something I'm going to cut up!
Paul Ko @ K2RD was thinking about making these, but those projects are all dead in the water.
I would be willing to pay good money for a set of nice lower mounts for the Koni front inserts.
How much for a pair of CNC'd units would cost?
I'll drop you an email later - too much stuff right now!
I've got a customer with an E8 I'm tuning now that I'm trying to finish up.
That winter rally pics looked super fun!
-Ted