Projects ?
#201
'Last Minute' Rallying
Thread Starter
Join Date: May 2002
Location: Lincoln, England
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
looking good bart ... very nice , you have a lot more patience than me ... I got p1ssed off trying to paint the engine on my 787b kit and its been in the cupboard ever since !
Mike
Mike
#202
HEAVY METAL THUNDER
Join Date: Oct 2002
Location: Elsenborn, Belgian Eifel
Posts: 3,864
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by MikeLMR
looking good bart ... very nice , you have a lot more patience than me ... I got p1ssed off trying to paint the engine on my 787b kit and its been in the cupboard ever since !
Mike
looking good bart ... very nice , you have a lot more patience than me ... I got p1ssed off trying to paint the engine on my 787b kit and its been in the cupboard ever since !
Mike
#203
_________________________
Originally posted by Kim
NOO It was like that, I just copied it and pasted. And the *** in the left lower corner is pretty nice too, you can hardly see it but im there.
NOO It was like that, I just copied it and pasted. And the *** in the left lower corner is pretty nice too, you can hardly see it but im there.
as far as kim's ***, trust me....I was there..... the only thing his BIG crack is good for....was holding tools
#205
OBEY YOUR MAZDA
I got some plastic today, so next project is to make Toe-Eliminators for the rear uprights. I got one meter of POM(PolyOxyMethylene) so there will be made as many as i can. Im just in need of EXACT measurements from hIGGI.
#208
OBEY YOUR MAZDA
How many do you need higgi?
Ill send you five sets, the inner diameter is 22mm. exactly.
I thought that i could have them done by the time you send me the memorystick for my friends camera, it would have been easier to send the metal inserts with it.
Can you have made five sets (10 pieces) of inserts for me?
Just mail me your adress and Ill send them ASAP.
Kim
Ill send you five sets, the inner diameter is 22mm. exactly.
I thought that i could have them done by the time you send me the memorystick for my friends camera, it would have been easier to send the metal inserts with it.
Can you have made five sets (10 pieces) of inserts for me?
Just mail me your adress and Ill send them ASAP.
Kim
#209
HEAVY METAL THUNDER
Join Date: Oct 2002
Location: Elsenborn, Belgian Eifel
Posts: 3,864
Likes: 0
Received 0 Likes
on
0 Posts
Kim, those things look pretty good. If I ever start that Seven look-a-like (used to be called locost, but already changed name to midcost ) I'll ask you to make some bushings
#210
Moderator
iTrader: (7)
Cool KIM! i am mailing you my address asap. I already mailed memorystick yesterday. I will try to get steel inserts done next week, i don`t do machining by myself so it does not depend only on me, but i will try my best.
5 sets are fine, i doubt we will ever install them all but it would be good to have them ready ;o)
5 sets are fine, i doubt we will ever install them all but it would be good to have them ready ;o)
#213
_________________________
Remember I use a tooth brush when cleaning my car So, I see everything..
I made my intercooler brackets with white plastic but will change it over the winter.
I made my intercooler brackets with white plastic but will change it over the winter.
#214
OBEY YOUR MAZDA
Originally posted by OC94Rx7
Did Jan cut those? they look good but I would of gone with black instead of white
Did Jan cut those? they look good but I would of gone with black instead of white
#215
HEAVY METAL THUNDER
Join Date: Oct 2002
Location: Elsenborn, Belgian Eifel
Posts: 3,864
Likes: 0
Received 0 Likes
on
0 Posts
If only I had enough money...
This would be it; but of course I'd want a rotary (Renesis?) in it...
It's made in Belgium, is part of Gran Turismo 3 (racing version), it's powered by Alfa Romeo, and it is (was) world record holder 0-60mph. IT'S FAST!
This would be it; but of course I'd want a rotary (Renesis?) in it...
It's made in Belgium, is part of Gran Turismo 3 (racing version), it's powered by Alfa Romeo, and it is (was) world record holder 0-60mph. IT'S FAST!
Last edited by rotary emotions; 05-16-03 at 10:35 AM.
#218
HEAVY METAL THUNDER
Join Date: Oct 2002
Location: Elsenborn, Belgian Eifel
Posts: 3,864
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Kim
Is that the Gillett, thats in GT3 that thing rocks
Is that the Gillett, thats in GT3 that thing rocks
#220
_________________________
Bart...nice photo's. I absolutely love it from the back. Maybe, a little more aggressive exhaust would finish it off nicely. The front is good too but, somethings off??... Maybe the windsheild needs to be more round like a Porsche 962?? not sit so high?? Would be a great Rotary project like you said.
#221
HEAVY METAL THUNDER
Join Date: Oct 2002
Location: Elsenborn, Belgian Eifel
Posts: 3,864
Likes: 0
Received 0 Likes
on
0 Posts
The car has been under development ever since the first one was built. a lot of details changed over the years, and the "Streiff" (race driver) version even got something that look like doors. The car is in my opinion near perfect, but indeed the exhaust isn't that well. My wife promised me I can buy one, if we win the lottery
#225
OBEY YOUR MAZDA
http://www.dba.dk/asp/soegning/soegn...9999&PrisFra=0
click the link Bart, there is a Ro80 for sale in Denmark, only 10K euros with a sparecar, motor and papers, you can have the illegal tax refunded if you import it to another eu-country
click the link Bart, there is a Ro80 for sale in Denmark, only 10K euros with a sparecar, motor and papers, you can have the illegal tax refunded if you import it to another eu-country