My FC3S can't be idling!
My FC3S can't be idling!
Yes. My car can't be idling, and have very hesitations with throttle input.
When we got the car, it have some problem to start, and idling. We got a new engine, but i was a US model, so we have to mix them together, so we could use the new engine blok. Now the car can start with out problems, but we still have the other problem
I thinks its a vaccume problem, and 1987RXguy think the same, but i can't find it
Hope there are someone from Denmark how can help me!
- Kim Bjerrehave(Denmark)
When we got the car, it have some problem to start, and idling. We got a new engine, but i was a US model, so we have to mix them together, so we could use the new engine blok. Now the car can start with out problems, but we still have the other problem

I thinks its a vaccume problem, and 1987RXguy think the same, but i can't find it

Hope there are someone from Denmark how can help me!
- Kim Bjerrehave(Denmark)
Check your TPS (throttle position sensor)!
You can find a manual on how to do it at; http://www.iluvmyrx7.com
To check for vaccumleaks, just buy a bootle of "starting-gas" and spray it around the engine at idle. If you have any leaks, the idle will increase a little bit when you spray at the leaking point!
Make sure you have something to stop a fire with... Startgas is very easy to put fire to!
You can find a manual on how to do it at; http://www.iluvmyrx7.com
To check for vaccumleaks, just buy a bootle of "starting-gas" and spray it around the engine at idle. If you have any leaks, the idle will increase a little bit when you spray at the leaking point!
Make sure you have something to stop a fire with... Startgas is very easy to put fire to!
Last edited by Arvika; Aug 28, 2005 at 10:12 AM.
Hej Kim
Som Arvika siger, så få justeret TPS (gasspjældssensor) det er roden til meget ondt i FCen. Få det gjort rigtigt med et ohmmeter ikke bare lysdiodemetoden som mange bruger.
Hvor i landet befinder du dig? Jeg = Randers
MVH
Kim Kjersgaard Nielsen
Som Arvika siger, så få justeret TPS (gasspjældssensor) det er roden til meget ondt i FCen. Få det gjort rigtigt med et ohmmeter ikke bare lysdiodemetoden som mange bruger.
Hvor i landet befinder du dig? Jeg = Randers
MVH
Kim Kjersgaard Nielsen
Originally Posted by Arvika
Check your TPS (throttle position sensor)!
You can find a manual on how to do it at; http://www.iluvmyrx7.com
To check for vaccumleaks, just buy a bootle of "starting-gas" and spray it around the engine at idle. If you have any leaks, the idle will increase a little bit when you spray at the leaking point!
Make sure you have something to stop a fire with... Startgas is very easy to put fire to!
You can find a manual on how to do it at; http://www.iluvmyrx7.com
To check for vaccumleaks, just buy a bootle of "starting-gas" and spray it around the engine at idle. If you have any leaks, the idle will increase a little bit when you spray at the leaking point!
Make sure you have something to stop a fire with... Startgas is very easy to put fire to!
I WOULD not recommend this trick at all. If the gas catches fire, you might have quite something else to worry about then vacuum leaks! I know this trick was/is common practice with carbs, but there too it is dangerous!
Thanks everyone. I will tjeck the TPS then 
Jeg kommer fra Sjælland, så vi har lige et betalingsanlæg der skilder os
Nærmer betegnet Vig, som er Nordvestsjælland.
Hvilke problemer kender du ellers til, med det TPS ?
- Kim Bjerrehave

Jeg kommer fra Sjælland, så vi har lige et betalingsanlæg der skilder os
Nærmer betegnet Vig, som er Nordvestsjælland.Hvilke problemer kender du ellers til, med det TPS ?
- Kim Bjerrehave
Smid lige en mail så kan du få mit nummer eller nummer på folk på Sjælland der kan hjælpe dig.
wankelkim@netscape.net
wankelkim@netscape.net
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Adaptronic Engine Mgmt - AUS
3
Sep 22, 2015 09:33 AM
RotaryBobby
1st Generation Specific (1979-1985)
1
Sep 10, 2015 01:33 PM




