Wolf 3D Install......
Full Member
Joined: Mar 2001
Posts: 147
Likes: 0
From: Vic, Australia
Sorry I can't help you right now but I am getting a Wolf 3D V4 put in my car as soon as it is released. If you are still having problems then, or if you have a specific problem I may be able to help you out then. At the very least I could ask the guy who is installing it for me any questions you might have about you Wolf 3D V3 install.
Hopefully someone will be able to help you out before then!
Hopefully someone will be able to help you out before then!
Full Member
Joined: Mar 2001
Posts: 51
Likes: 0
From: Newport News, VA USA
I've installed a 3D in my FD....perhaps I can be of some help.
However, I do have questions about tuning. I am running about 10.5 A/F at high loads. Is this too rich? My timing map is about 31 at low load and 15 at high loads (15 psi boost). Does that sound right? Thanks.
However, I do have questions about tuning. I am running about 10.5 A/F at high loads. Is this too rich? My timing map is about 31 at low load and 15 at high loads (15 psi boost). Does that sound right? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
