Using Switch for Single Turbo fuzzy logic
Thread Starter
boxed in and drawn out
Joined: Dec 2003
Posts: 555
Likes: 0
From: Bayouself
Using Switch for Single Turbo fuzzy logic
The HKS fuzzy logic boost control allows me to program a (set) higher boost for so many seconds.
Has anyone out there used this feature and what device is used as an activation switch. I would like 10 PSI off the line and full boost of15-20 PSI in second gear then on.
Has anyone out there used this feature and what device is used as an activation switch. I would like 10 PSI off the line and full boost of15-20 PSI in second gear then on.
Senior Member
Joined: Nov 2003
Posts: 565
Likes: 1
From: Arizona
Fuzzy logic is just the boost controller learning your driving style. It's not a set higher boost. You can set scramble boost but you have to push the button if the hks unit has that option. Scramble boost is just a slightly higher boost setting that is only activated when you push the button.
-Destin
-Destin
Thread Starter
boxed in and drawn out
Joined: Dec 2003
Posts: 555
Likes: 0
From: Bayouself
Originally Posted by sillbeer
Fuzzy logic is just the boost controller learning your driving style. It's not a set higher boost. You can set scramble boost but you have to push the button if the hks unit has that option. Scramble boost is just a slightly higher boost setting that is only activated when you push the button.
-Destin
-Destin
Yes I wrote the wrong concept...with that being said what is the plug in button/switch that the HKS unit utilizes? I am sure there has to be something that plugs into the unit with a special pigtail.I know how to use it but need to know what to buy.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
Jan 11, 2016 04:08 PM
stickmantijuana
Single Turbo RX-7's
0
Aug 21, 2015 08:35 PM