logging locks after .5 to 8 seconds//
#1
Racing Rotary Since 1983
Thread Starter
iTrader: (6)
logging locks after .5 to 8 seconds//
i posted this under the Power FC area but haven't gotten any help.
i have been running my PFC/Datalogit for a number of years and all of a sudden i am unable to log more than .5 to 8 seconds. it just, then, locks.
i have tried varying the coverage, basic advanced etc to no avail. i deleted a bunch of old logs just for kicks but that had no effect. my computer has plenty of available space. i am not using the commander. i am running V 1.090 which has worked excellently for a number of years and, easily, 500 logs.
i am just shaking down a methanol injection system as well as a few other things so i decided i didn't want to have to deal w the newest Datalogit version should it have some initial bugs.
i did a search and didn't come up w anything in the datalogit and RX7club archives.
FYI, i can replay old logs and when it does log it picks up all channels. i run a techedge 1.5 using an1 and an2. i log egts on an3 and fuel pressure on an4.
i would greatly appreciate any help as i am especially interested in getting my methanol going.
thanks,
howard coleman
i have been running my PFC/Datalogit for a number of years and all of a sudden i am unable to log more than .5 to 8 seconds. it just, then, locks.
i have tried varying the coverage, basic advanced etc to no avail. i deleted a bunch of old logs just for kicks but that had no effect. my computer has plenty of available space. i am not using the commander. i am running V 1.090 which has worked excellently for a number of years and, easily, 500 logs.
i am just shaking down a methanol injection system as well as a few other things so i decided i didn't want to have to deal w the newest Datalogit version should it have some initial bugs.
i did a search and didn't come up w anything in the datalogit and RX7club archives.
FYI, i can replay old logs and when it does log it picks up all channels. i run a techedge 1.5 using an1 and an2. i log egts on an3 and fuel pressure on an4.
i would greatly appreciate any help as i am especially interested in getting my methanol going.
thanks,
howard coleman
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Race Car Tech
0
10-01-15 10:25 AM
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM