Do I need an aftermarket ECU??
Thread Starter
Junior Member
Joined: Apr 2001
Posts: 17
Likes: 0
From: Gaffney, SC Cherokee
Do I need an aftermarket ECU??
My main concern is reliability, not more HP. Of course i'm going to floor it from time to time.. As of now my 7 is undergoing major surgery. Here are the engine mods that will be on the car when i next drive it:
94 RX-7
Intake
Downpipe
Exhaust
Streetported
I feel pretty damn sure that i need an aftermarket ECU. Just give me a good reason WHY i need one, and what i should look for (under $1,200). Thanks a million!
Clint Davis
------------------
SC High Tach Motorsports President
94 RX-7
Intake
Downpipe
Exhaust
Streetported
I feel pretty damn sure that i need an aftermarket ECU. Just give me a good reason WHY i need one, and what i should look for (under $1,200). Thanks a million!
Clint Davis
------------------
SC High Tach Motorsports President
Passenger
Posts: n/a
There is one major one. You can adjust a Haltech, or you can put a band-aid on your factory ECU. I just finished my second Haltech install and I don't have any way to express my total happiness with my E6K and the Hitman (my source for the product) Good luck on your quest!------------------
1986 TII
hybrid turbo
j-spec series V motor Haltech E6K
720cc secondary injectors
Aftermarket exaust
1983 Mustang coupe
Cartech outlaw turbo kit
Haltech F3
paxton fuel system
1983 ford f-150
460ci big block
Thread Starter
Junior Member
Joined: Apr 2001
Posts: 17
Likes: 0
From: Gaffney, SC Cherokee
Motec, Haltec, Wolf 3D, Power FC..
I've heard them all, now how do i get one. I plan on no further engine modificiations besides a midpipe... Soooo, do i simply order the ECU with the perameters setup to the modifications done to the car and finito?
intake, downpipe, midpipe, exhaust, streetported, pulley
Here again, the cheaper the price the better!!! I've seen used ones for around $500, which is a very comfortable price for me
help a rotorhead out 
------------------
SC High Tach Motorsports President
I've heard them all, now how do i get one. I plan on no further engine modificiations besides a midpipe... Soooo, do i simply order the ECU with the perameters setup to the modifications done to the car and finito?
intake, downpipe, midpipe, exhaust, streetported, pulley
Here again, the cheaper the price the better!!! I've seen used ones for around $500, which is a very comfortable price for me
help a rotorhead out ------------------
SC High Tach Motorsports President
Passenger
Posts: n/a
Get in touch with the Hitman he is the only way to go, very fast service, the best product, and knowledge. My 2nd gen runs better that stock and now I can tune it. If you can handle the install it's well worth the effort.------------------
1986 TII
hybrid turbo
j-spec series V motor Haltech E6K
720cc secondary injectors
Aftermarket exaust
1983 Mustang coupe
Cartech outlaw turbo kit
Haltech F3
paxton fuel system
1983 ford f-150
460ci big block
How to get a hold of Hitman. How much is that with the harness and is there a post with detailed instructions. I really want to do this, but thought it must be dynotuned. How long does the install take. I have a GTX and a GTR.
Need some T2 advice, PM me if possible.
Thanks, ARD
Need some T2 advice, PM me if possible.
Thanks, ARD
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM
