so i have a 88 rx7 with a tii swap streetport 720 secondaries 3'' exhaust intake fmic afrp walbro 255 an fcd. i wanted to know i have the older fcon an today i was goin through my eninge doing a check up to make sure it was all tight. An i for got to plug my maf back in. Ive done this before i had the fcon an it would just die. but now that i have the fcon when the maf was off the car ran an idled. can i run the car with out the maf now that i have the fcon, pressure sensor, an fcd. The only thing was when i did this the car ran extremely rich at idle. if i turn the fcon down can i run it with out the stock maf. i think i have it set a 5 now.