controlling an upgraded ECU
09-17-01, 10:37 PM
#1
Full Member
Thread Starter
Join Date: Sep 2001
Location: San Diego, CA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
controlling an upgraded ECU
is it difficukt to control an upgraded ECU, like Haltech or Pettit? i dont know too much about aftermarket ECU's. Can somebody please shed some light on this dark topic for me...
09-18-01, 09:02 AM
#2
Rotary Enthusiast
Join Date: Apr 2001
Location: North Hollywood, Ca USA
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
what do you mean by difficult to control? you have total control of all engine functions. if you mean that these systems are difficult to tune for people who have never seen an aftermarket engine management system. you may be right, but they are very easy to work with once you get into the software and start to work with it. you should know some basics of engine tuning and engine operation, but there are alot of shops and sources for help with almost any system. the reprogramed units take no technical knowledge except to ability to remove one ECU and install the new one.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
stickmantijuana
MoTeC
5
09-10-15 07:58 PM
Snook
3rd Generation Specific (1993-2002)
21
09-01-15 06:32 PM