13b RE guys which EMS are u running?
#2
Banzai Racing
We are actually running the FD Apexi Power FC in our 91 vert w/13b-re, but we have tuned several cars that were running the Microtech and Haltech units.
You would probably be better off installing a stock S4 or S5 turbo, than running the twins which will require a custom downpipe.
You would probably be better off installing a stock S4 or S5 turbo, than running the twins which will require a custom downpipe.
#6
Mac Attack
iTrader: (5)
If you're thinking about running the twins sequentially, forget about it unless you want to deal with the nightmare of vacuum lines. Most people run them in parallel.
If you're running them in parallel, you might as well use the s5 turbo if you don't want to fabricate a custom downpipe that mates to the stock twins.
If you're running them in parallel, you might as well use the s5 turbo if you don't want to fabricate a custom downpipe that mates to the stock twins.
#7
Lives on the Forum
Originally Posted by xboxthug13b
i was thining of microtech since it was supposely made for rotaries.
You really need to do your research...
-Ted
Trending Topics
#8
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
I think the sentence should read "the Microtech was designed from the ground up with rotary engines in mind". This is almost a direct quote from a Microtech representative I spoke with. Apparently Microtech always considers the rotary engine first when they design their ECUs.
#9
Lives on the Forum
Now the question is...does that make it a superior EMS?
MoTeC just came out with a 2-rotor version specifically for the 13B, but MoTeC was never conceived as a rotary application EMS initially.
Does that makes the Microtech superior than the MoTeC?
If anything, Haltech has been doing this since 1986, and it's one of the oldest EMS companies (out of Aussie).
Now, before we get into another pissing match about brands, my stand is that go for the unit that gets you the best tech support.
Funny, I got an email from the OP, and this is exactly what I told him earlier...
-Ted
MoTeC just came out with a 2-rotor version specifically for the 13B, but MoTeC was never conceived as a rotary application EMS initially.
Does that makes the Microtech superior than the MoTeC?
If anything, Haltech has been doing this since 1986, and it's one of the oldest EMS companies (out of Aussie).
Now, before we get into another pissing match about brands, my stand is that go for the unit that gets you the best tech support.
Funny, I got an email from the OP, and this is exactly what I told him earlier...
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM