seat & steering wheel combo
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: nyc
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
seat & steering wheel combo
i need a good seat and wheel setup quick release too... problem #1 i cant find anyone that makes seat rails for the fc... maybe im just retarded problem#2 im a big guy 200+lbs so my fat *** doesnt fit in most seats anyone have a suggestions?? links to where i can actually get them would be nice too thanks in advance i always get good info from you guys
#2
RX7-Factory
iTrader: (8)
i personally suggest TII seats. for atleast the drivers side. they will fit you fine, and hold your *** in place so you can focus on driving the car, instead of holding on.
i bought a TII parts car and swapped the seats. they fit right in, and do alot better of a job holding you than puny NA/convertible seats.
i'm running a JDM mazdaspeed infini iv steering wheel/nrg quick release. don't buy knockoff ebay QW's. they suck. nardi, sparco, and MS wheels are the ****. MS stuff is expensive, and hard to find though, which sucks.
i bought a TII parts car and swapped the seats. they fit right in, and do alot better of a job holding you than puny NA/convertible seats.
i'm running a JDM mazdaspeed infini iv steering wheel/nrg quick release. don't buy knockoff ebay QW's. they suck. nardi, sparco, and MS wheels are the ****. MS stuff is expensive, and hard to find though, which sucks.
#3
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: nyc
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
^^ thanks for the info but my car is a turboII so i have those seats and they do the job but im looking for something 1 thats non reclinable cause the back of the seat flexs alittle but that could be because im fat... and 2 i just put in an auto power bolt in roll bar with the harness bar and i would like to put it to use... plus it looks stupid having somewhat of a cage but stock seat and wheel
Last edited by fcnoevil; 05-03-09 at 09:44 AM. Reason: i is retard
#4
Tango Down
iTrader: (3)
infini buckets.
I'm constantly browsing ebay for em knowing damn well i dont have the coin to get one.
The nardi deep corn steering wheel is really popular. I'm sure there's a good reason for that.
An ebay quick release should be called an "organ donor" because that's what you'll be doing when that **** breaks. It's not an "if" it breaks. It's a when. I've had two of my friends tell me they broke the qr mechanism but after removing it, it's all good. The castings of ebay hubs themselves doesn't look to great but they do hold up pretty well.
My vote goes to NRG hub and i run an ebay non q/r hub.....
I'm constantly browsing ebay for em knowing damn well i dont have the coin to get one.
The nardi deep corn steering wheel is really popular. I'm sure there's a good reason for that.
An ebay quick release should be called an "organ donor" because that's what you'll be doing when that **** breaks. It's not an "if" it breaks. It's a when. I've had two of my friends tell me they broke the qr mechanism but after removing it, it's all good. The castings of ebay hubs themselves doesn't look to great but they do hold up pretty well.
My vote goes to NRG hub and i run an ebay non q/r hub.....
#7
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: nyc
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
^^ you know i was lookin into those i know they have rails but ive never heard any feed back on these seats specifically the forza or the fx1 pro of course in wide lol but ive never seen any of these seats installed in an fc and how high the seat would mount if anyone happens to have pic of either one of these seats on the corbeau rails or custom rail pics would be highly appreciated im just curious cause im 6'+ and i wanna make sure me plus a helmet will clear the roof cause in my old 240 it would rub the headliner during runs
Last edited by fcnoevil; 05-03-09 at 02:09 PM. Reason: i is retard
Trending Topics
#8
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: nyc
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
^^ yea cause losing 50lbs is gonna make me shorter... e-thugs lol... no one likes an *******... you should learn how to spell too lol
Last edited by fcnoevil; 05-03-09 at 07:18 PM. Reason: i is retard
#10
Senior Member
I ended up using the stock rail with an adapter for side mount rails. I also cut the mounting points out of the floor and bolted the rail flat to the floor using backing plates and vynil lock nuts to give me more head room.
#14
Devil in Training
iTrader: (2)
Join Date: Dec 2005
Location: Garden Grove, CA
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
if your going for a bottom mount seat i know recaro makes a set of slider that fit in a fc, i used to have a set of them a few years back. the only issue is you will sit high, depending on the seat.
#15
Has been.. hangin' around
Join Date: Mar 2001
Location: Milpitas, CA
Posts: 2,618
Likes: 0
Received 0 Likes
on
0 Posts
I'm waaay bigger than you, and the Kirkey Roadrace seat (the biggest one) fits me fine. I have mine mounted directly to the floor, but how streetable that seat is, I wouldn't really say.