The OFFICIAL post pics of your Drift Car thread:
#3002
Full Member
iTrader: (1)
Join Date: Jan 2010
Location: Alberta, Canada
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
meh a 20v ae111 4age I would never touch again, cool engine, makes cool sounds and looks cool with itbs but so gutless and no tq and takes quite a bit of work and money to make it fast. I guess it all depends on what you want for it tho. thats just my opinion after owning one tho.
vq35 would be sick tho, I was close to doing that into my corolla, but my wallet reminded me I couldnt :p
vq35 would be sick tho, I was close to doing that into my corolla, but my wallet reminded me I couldnt :p
#3003
Tango Down
iTrader: (3)
meh a 20v ae111 4age I would never touch again, cool engine, makes cool sounds and looks cool with itbs but so gutless and no tq and takes quite a bit of work and money to make it fast. I guess it all depends on what you want for it tho. thats just my opinion after owning one tho.
vq35 would be sick tho, I was close to doing that into my corolla, but my wallet reminded me I couldnt :p
vq35 would be sick tho, I was close to doing that into my corolla, but my wallet reminded me I couldnt :p
Lol.
I love that "SNNNNNORT" noise itb's make.
You in canada land right?
How much do the rb25/rb30de's run that way? Not that i want one but i know they exist, i just dont see them being imported to the usa.....ever.
#3005
Full Member
iTrader: (1)
Join Date: Jan 2010
Location: Alberta, Canada
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
rb30's dont come around very often, theres a couple i think around edmonton that are bored out 26det's, rb25det's complete motorsets with tranny, wiring, ecu and go for about $1800-2000 CAD I think
Last edited by mot_bot; 07-08-10 at 07:49 PM.
#3006
Tango Down
iTrader: (3)
Lame..... It's the new type r swapped crx.
Nah, i'm talking like LEGIT factory de motors. High compression n/a factory dual cam. They're everywhere in nz/aus...... Bummer that north american isn't getting in on that dope **** too.
No doubt they'd run cheaper than their det older brothers. Alright, imma stop clusterfucking but i think this **** is cool.
http://www.youtube.com/watch?v=C-tLWkc8r2k
Nah, i'm talking like LEGIT factory de motors. High compression n/a factory dual cam. They're everywhere in nz/aus...... Bummer that north american isn't getting in on that dope **** too.
No doubt they'd run cheaper than their det older brothers. Alright, imma stop clusterfucking but i think this **** is cool.
http://www.youtube.com/watch?v=C-tLWkc8r2k
#3007
Full Member
iTrader: (2)
Join Date: Mar 2004
Location: Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RB30's are not as expensive as you'd think. . .Allen Petersen was talking/working with some guys in Australia on building them. . .he used to live in Lethbridge but moved to B.C. somewhere. . .
Mot Bot. . .time to get your car running dude. . .
#3008
Full Member
iTrader: (1)
Join Date: Jan 2010
Location: Alberta, Canada
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
go check my thread again.. it runs better than the last video posted in it, but my oil pan decided to start leaking... out comes the engine again, fuuuuuuu
also my a/f gauge reads stoich at idle but after it idles for a while it seems to flood pretty good..
also my a/f gauge reads stoich at idle but after it idles for a while it seems to flood pretty good..
#3009
Garage Life
iTrader: (8)
i know I have mis matched aero.. waiting next paycheck for bn sides.. Yeah i know, my gf drew a big heart on my hood..
new color for my vertt..
Just bought some dtss eliminator bushings and gp sports tierods! Now I just need to install them on my next day off.
The new bride Lowmax seat is bolted on the floor! drilled out the spot welds seat floor brackets on the floor. Plenty of head room now. I feel short in my car. I also welded a bash bar to hold up the front bumper
I still have a spare t2 motor sitting on the side.. I just need a O ring kit and apex seals to get the build going.. Then slowly collect all the t2 parts.. I still need a t2 tranny, driveshaft, diff, turbo, injectors, LIM... damnit i want to turbo this car alreadyyy.. I know this is a dumb question, but anybody knows if its possible to run the s5 NA harness and ecu with safc on a t2 motor? What if i did that and just ran low boost?
cant wait for the next drift eventt!
#3010
Tango Down
iTrader: (3)
I would highly recommend you DONT run the n/a ecu. Even on stock boost. It will work, yeah. But do you really want to risk blowing it up? **** it. What's one more motor build? You can probably do that **** in your sleep. Gp sides dont look all that bad with bn on this car. It looked aids on the gold car for some reason. ****. That makes me want a vert. There's a handful i've seen that looked dope as ****. People want an arm and a leg for em here though. Hatches for $800-1000 RUNNING all day.
#3014
The Doctor
iTrader: (1)
Join Date: Apr 2008
Location: Cedar Rapids, IA
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
I agree though. I wouldn't recommend it for drifting. A brand new full MS2 kit is what... 300-400$? Try picking one of those up. It opens your options to so much more on modding the car too.
#3020
it go down in the dm
iTrader: (10)
You can run an S5 TII with an N353 (S5 Vert ecu)
I ran it like that for 3 years with 10lbs boost. My car ran into some weird problems though and I went with an N370. I don't reccomend using the NA ecu for anything more then moving the car around or testing to see if the car runs.
The story behind it is that every vert is turbo'd except in the states so it's mapped for boost as well, whether this or true or not don't know but that's what I went off of.
Old pic.
I ran it like that for 3 years with 10lbs boost. My car ran into some weird problems though and I went with an N370. I don't reccomend using the NA ecu for anything more then moving the car around or testing to see if the car runs.
The story behind it is that every vert is turbo'd except in the states so it's mapped for boost as well, whether this or true or not don't know but that's what I went off of.
Old pic.
#3022
s4 GENERAL
#3023
Full Member
Join Date: Dec 2008
Location: Rennes, Britanny - France
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Work still in progress
Engine bay almost done, need some bits.
(The air pump is just an idle pulley)
First track day for this lil toy will be the last day of this month... Can't wait !
Engine bay almost done, need some bits.
(The air pump is just an idle pulley)
First track day for this lil toy will be the last day of this month... Can't wait !