winnipeg 7's
#479
Rotary Enthusiast
#480
i was wondering where do you guys go to drive your rx7's to there limits because i know there is that drag strip in gimli but is there any good windy roads or autocross events that ever happen?
#485
Hey guys , I picked up a complete RX4 13B engine to play with . I want to tear it down over xmas and through the winter .
anyone have an engine stand adapter for the block I can borrow or buy off you ?
If not I may order one from Atkins in the states . Also need a 54 mm or 2 1/8" flywheel socket . I understand sears may the place to get this .
anyone have an engine stand adapter for the block I can borrow or buy off you ?
If not I may order one from Atkins in the states . Also need a 54 mm or 2 1/8" flywheel socket . I understand sears may the place to get this .
#487
Rotary Enthusiast
Yeah, not much for gifts this year. But normally gifts do suffer. I just treat myself and buy whatever I want. Spent too much money this year.
poor FD is being neglected however for now
#489
Fred's not the best, he built my fc engine, took like 6 months, and even then the engine wasnt running right so he had to take it apart again and the bearings were knocking... so he had to take it all apart now etc... i wouldnt trust freddy worth a ****, he's a rip off, and i hope you read this fred. So i got fed up with the car, sold it to someone and the engine blew because he left the cas 180 degrees out and blew all the seals, and he stated it wasnt his fault and never warrntied the engine.. when he did build it, it was still smoking and couldnt fix it... i thought he was a good rotary tech myself thats why i took there in the first place but ended up getting fucked... I had a red turbo 2, with to4, greddy intercooler, power fc etc...
Last edited by cantaffordit; 01-04-09 at 10:39 AM. Reason: spelling
#490
#492
Anyone have any projects going on your car or related things ?
I have two . I am tearing down and hopefully rebuilding a 1974 RX4 13B engine I picked up for $75 to play with . I may put it in the '79 if it works out . This would be my first attempt at doing anything like this .
Also building a plastic model of my '79 and taking the time to try and get it painted to match the detail as close as possible to the real car .
Heres a few pics of the 13B teardown and the model . The teardown has only finished getting all the peripherals off and the flywheel and front pulley and plate off . Needed to buy a huge flywheel socket form sears for the flywheel ( 21/8 inches) . Check out the block heater that came out of the block . Must have been a local car . I think it came from an RX4 wagon.
Also , for painting the model , check out the "spray booth" in the garage made from a shop vac box and some pape clips to hang the pieces from . It was in there for primer and heat bake from a 1500 watt halogen lamp form pricess auto . Kind of necessary with the temperatures this month.
I have two . I am tearing down and hopefully rebuilding a 1974 RX4 13B engine I picked up for $75 to play with . I may put it in the '79 if it works out . This would be my first attempt at doing anything like this .
Also building a plastic model of my '79 and taking the time to try and get it painted to match the detail as close as possible to the real car .
Heres a few pics of the 13B teardown and the model . The teardown has only finished getting all the peripherals off and the flywheel and front pulley and plate off . Needed to buy a huge flywheel socket form sears for the flywheel ( 21/8 inches) . Check out the block heater that came out of the block . Must have been a local car . I think it came from an RX4 wagon.
Also , for painting the model , check out the "spray booth" in the garage made from a shop vac box and some pape clips to hang the pieces from . It was in there for primer and heat bake from a 1500 watt halogen lamp form pricess auto . Kind of necessary with the temperatures this month.
#493
I would be willing to bet that the motor you got is a boat anchor. Not trying to kill your fun, I have torn down more than a few and when they look like that and are that old, chances are its junk.
#494
I see you have a repu for sale ..... how would we get it to winnipeg if I was interested ? Can you send me some pictures ?
#495
yeah I do, It still has manitoba plates on it actually. I will find some pics, thee are some on this site. There are also a few peggers that have seen it in person. Getting it to winnipeg would be not to hard, either transport or fly out here and tow it back. When I bought it, I drove to seattle and towed it back to winnipeg, than drove it out here when I moved here.
#496
Senior Member
iTrader: (7)
Join Date: Aug 2007
Location: winnipeg
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Just up until the other day I had no idea there was even such a thing as a rotary truck. I ended up finding this old repair manual from 1978 that like covers everything you need to know about repairing it from small things to a complete rebuild , if you do end up getting it, just let me know and I could lend it to you.
on another not, canaffordit, no I am not eric, and there is no 20b in it, just pretty much all stock. My name is from when I was planning a 20b build, but it didnt end up working out, so I found the 7 I currently have, and couldnt be happier. I dont find myself wishing I had a 20b either, the 13b is enough for me.
on another not, canaffordit, no I am not eric, and there is no 20b in it, just pretty much all stock. My name is from when I was planning a 20b build, but it didnt end up working out, so I found the 7 I currently have, and couldnt be happier. I dont find myself wishing I had a 20b either, the 13b is enough for me.
#497
Full Member
Join Date: Jul 2004
Location: Winnipeg, Canada
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
yeah I do, It still has manitoba plates on it actually. I will find some pics, thee are some on this site. There are also a few peggers that have seen it in person. Getting it to winnipeg would be not to hard, either transport or fly out here and tow it back. When I bought it, I drove to seattle and towed it back to winnipeg, than drove it out here when I moved here.
And the truck is very nicely done, I can't believe your selling it.
#498
How have things been going Dave? I have seen some updates on your FD, looks deadly man!!
#499
Junior Member
Join Date: Oct 2008
Location: Fort Saskatchewan, AB + Winnipeg, MB
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Hey everyone
I would really appreciate it if you could help me out on this
My '85 RX-7 was an autopack writeoff
I need a few things for it and I've been having problems finding some of the stuff
I can't seem to find any 4x110 rims
And the only lower control arms I can find are off ebay for $60
Any of you guys got some spares or know of someone with some parts?
Any help will be greatly appreciated. Thanks
I would really appreciate it if you could help me out on this
My '85 RX-7 was an autopack writeoff
I need a few things for it and I've been having problems finding some of the stuff
I can't seem to find any 4x110 rims
And the only lower control arms I can find are off ebay for $60
Any of you guys got some spares or know of someone with some parts?
Any help will be greatly appreciated. Thanks
#500
Hey everyone
I would really appreciate it if you could help me out on this
My '85 RX-7 was an autopack writeoff
I need a few things for it and I've been having problems finding some of the stuff
I can't seem to find any 4x110 rims
And the only lower control arms I can find are off ebay for $60
Any of you guys got some spares or know of someone with some parts?
Any help will be greatly appreciated. Thanks
I would really appreciate it if you could help me out on this
My '85 RX-7 was an autopack writeoff
I need a few things for it and I've been having problems finding some of the stuff
I can't seem to find any 4x110 rims
And the only lower control arms I can find are off ebay for $60
Any of you guys got some spares or know of someone with some parts?
Any help will be greatly appreciated. Thanks
FRED has a bunch of old 7's in his back yard and may be able to help you. You have to go down to his place and ask for him . I don't have a phone number . He lives on west side of Pembina just south of the st. Norbert arena . Its a white building with a store front that used to be an ice cream shop ( "cream" on side of building ) go in the back wood gate and knock on the house door to find him.
there were also some on usedwinnipeg.com a few weeks ago . They may not have sold and the ad just run out . see if you can get a number for any old listings ?
I guy work with may have one , I pm'd you his number, name is Darin
ebay is your other best bet