If you where to assemble a tool collection right now, what would the top 5-10 tools be for working on an rx-7....and tools you could actually put in a normal size "carry along, handle type" toolbox....like one you'd keep in your car...or use for going on service calls...
Thanks...

 

metric socket set
pliers
vice grips
small pry bar
philips screw driver
flat screw driver
that should cover most road side issues i think.
matt

 

just put a custom snap on drawer kit in the back hatch ...

 

Dont forget some spare hoses and fluids.

 

spark plug socket and rachet..a roll of wire a few connectors..spare fuses..electrical tape..

 

My tool box I take to teh track includes
metric from 6 to 21 mm wrenches
two 14 mm wrenches
hammer
hacksaw
knife
duct tape
hose clamps
spare coolant heater hozes
RTV
zip ties
Breaker bar
sockets from 10 to 21 mm.
one of those all in one screw drivers
pliers
vice grips
tire pres gauge

 

o ya dont forget the extra engine

 

and the sink

 

best tool ever = caa card.

 

what I should have

8mm wrench
10, 12, 14, 17, 19mm wrenches and sockets deep and shallow
a second 12 and 14mm wrench
21mm deep socket for lugs with breaker bar
jack and stands
wire and tape/fuses
coolant and oil
pliers and hammer

what i do have in the back of the repu,
coolant, oil
injection oil and funnel
tire iron and shitty scissor jack
spare tire

 

jb weld, duct tape and zip ties will get you home. even if you are in the sahara.