Need Mechanic or Help in OTTAWA
#1
Need Mechanic or Help in OTTAWA
Hello my name is Konrad, I've owned my 3rd gen RX7 for the past 4 years and had no problems till recently. My regular mechanic completely botched my enfini y pipe, the new pipe I bought has basically been hacked apart and the original part was reinstalled badly. The day I dove the car home from the mechanic's it was ok, but since then I've been having vacuum leaks and my turbos are having boost problems. I've always come across these stories, but never thought I'd be a victim of one.
I'm either looking for some recommendations for a great mechanic in Ottawa or for some hands on help.
I'm either looking for some recommendations for a great mechanic in Ottawa or for some hands on help.
#2
Senior Member
iTrader: (9)
Hello Konrad,
Your issue isnt a RX7 specific one, so any comperat shop that deals with custom / boosted setups can take care of you .
If you cant find anything near you, try going to
HPAUTO.CA
Great shop, very knowledgeable on custom and turbo setups . plus he has worked on a few FDs
latest one was a nice single P1000 setup.
He's just over the bridge. Great shop
Your issue isnt a RX7 specific one, so any comperat shop that deals with custom / boosted setups can take care of you .
If you cant find anything near you, try going to
HPAUTO.CA
Great shop, very knowledgeable on custom and turbo setups . plus he has worked on a few FDs
latest one was a nice single P1000 setup.
He's just over the bridge. Great shop
#4
Rotorless
iTrader: (11)
Do it yourself next time, save your money & aggregation. Not that hard, just a bitch to get in with the twins setup.
Tip:
If unsure take lots of pictures during the disassembly, mark all hoses and just reverse the order.
I'm sure one of the great guys up your way would give a hand, but don't forget the beer ... their a thirsty bunch!
Tip:
If unsure take lots of pictures during the disassembly, mark all hoses and just reverse the order.
I'm sure one of the great guys up your way would give a hand, but don't forget the beer ... their a thirsty bunch!
#5
Do it yourself next time, save your money & aggregation. Not that hard, just a bitch to get in with the twins setup.
Tip:
If unsure take lots of pictures during the disassembly, mark all hoses and just reverse the order.
I'm sure one of the great guys up your way would give a hand, but don't forget the beer ... their a thirsty bunch!
Tip:
If unsure take lots of pictures during the disassembly, mark all hoses and just reverse the order.
I'm sure one of the great guys up your way would give a hand, but don't forget the beer ... their a thirsty bunch!
we are a helpful bunch I ask for pepsi/coca-cola haha
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
SRTx781
3rd Generation Specific (1993-2002)
6
12-19-15 07:30 PM