Guys, help!
#1
Rotary Enthusiast
Thread Starter
Join Date: Mar 2005
Location: Ontario
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
Guys, help!
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/air-pump-problem-help-needed-466312/
That's the original thread. Long story short, I need an air pump, Anyone relatively local have one? Also, if any of you have some insight on my cold-start problem, that would really be appreciated.
That's the original thread. Long story short, I need an air pump, Anyone relatively local have one? Also, if any of you have some insight on my cold-start problem, that would really be appreciated.
#3
Rotary Enthusiast
Thread Starter
Join Date: Mar 2005
Location: Ontario
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
Oh yeah man, I was rebuilding my pump. Wasn't going so well. I got the thing down to a shell, where it would turn nice and smooth, but when I put everything back in, and I know its in there correctly, I verified with my not good anymore pump, it wouldn't turn right.
#6
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Join Date: Jun 2001
Location: London, Ontario, Canada
Posts: 3,106
Likes: 0
Received 0 Likes
on
0 Posts
If your car isn't running, it's not the airpump or lack of an air pump causing the problem. It can only cause far more minor problems.
I'm not sure what your problem is, but it sounds electrical. Quiet possibly to do with a short or malfunctioning AFM or something.
I'm not sure what your problem is, but it sounds electrical. Quiet possibly to do with a short or malfunctioning AFM or something.
#7
Rotary Enthusiast
Thread Starter
Join Date: Mar 2005
Location: Ontario
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
I swapped out the BACV on the Dynamic Chamber yesterday with a spare that came with the car, I haven't gotten to test it in cold weather yet, but that should be tonight. I noticed right away that the idle was much smoother. Inside the old one, the thing wouldn't spring back like the replacement unit would. Its possibly that, I will keep you updated.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kruel13
1st Generation Specific (1979-1985)
24
09-16-15 09:08 AM