Canadian Forum Canadian users, post event and club info here.

Gauging Interest for a DynoJet Dyno Day/Meet

Thread Tools
 
Search this Thread
 
Old May 26, 2008 | 02:19 PM
  #1  
ScrappyDoo's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2004
Posts: 1,855
Likes: 0
From: Woodbridge, Ontario
Gauging Interest for a DynoJet Dyno Day/Meet

Gauging Interest for a DynoJet Dyno Day/Meet

This is not for a tuning day.

This is for a day to get a couple of pulls on a Dynojet brand machine so that we can bask in the glory of the over inflated numbers these wonderful machines provide. Ever wondered what your car really puts to the pavement?

I arranged this several years ago and it was quite successful since it was a good meet and we had about 15-20 cars pass through the dyno. I will be using a different dyno location. I will be confirming the location based on interest expressed here and at the rx8club.

Spectators are welcome. This is not just a dyno meet, but also a chance to get together. We’ll get a BBQ going and have some beverages on hand.


WHEN: Saturday, June 21st, 2008 10:00am onwards

WHERE: TBA

HOW MUCH: $40 for two dyno pulls, first to pay gets there choice of time slot

PayPal $41 -> charngill@osgoode.yorku.ca

Or $40 cash, all must be prepaid in advance. You can arrange to meet me via PMs if paypal is inconvenient.

Please don’t send me money unless you hear that this is a confirmed event. I would need to see a list of at least 15 cars to make this happen.
Reply
Old May 26, 2008 | 02:47 PM
  #2  
JDK's Avatar
JDK
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
iTrader: (8)
 
Joined: Apr 2003
Posts: 2,205
Likes: 1
From: Mississauga,Ont Canada
Sounds like fun, I'm in
Reply
Old May 26, 2008 | 03:10 PM
  #3  
RA8225's Avatar
Banned
iTrader: (6)
 
Joined: Jul 2003
Posts: 7,141
Likes: 46
In
Reply
Old May 26, 2008 | 03:37 PM
  #4  
Nismo Convert86's Avatar
400WHP or bust
Tenured Member 15 Years
iTrader: (7)
 
Joined: Oct 2003
Posts: 4,048
Likes: 0
From: Walkerton, Ontario Canada
Hmmm I might be in, any FD's I can show up?
Reply
Old May 26, 2008 | 05:08 PM
  #5  
drezjdmrx7's Avatar
RAWWRRX7
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2007
Posts: 198
Likes: 1
From: Toronto, Ontario Canada
i'm in
Reply
Old May 26, 2008 | 08:39 PM
  #6  
theory's Avatar
Rotary Dynamics
Tenured Member 10 Years
iTrader: (5)
 
Joined: Aug 2005
Posts: 610
Likes: 0
From: Stoney Creek,Ontario
1. ScrappyDoo
2. jim kutschke
3. 7_rocket
4. drezjdmrx7
5. theory
Reply
Old May 26, 2008 | 09:06 PM
  #7  
gkarmadi's Avatar
water jacket mod??!
Tenured Member 10 Years
iTrader: (20)
 
Joined: Nov 2004
Posts: 1,431
Likes: 1
From: Ontario
1. ScrappyDoo
2. jim kutschke
3. 7_rocket
4. drezjdmrx7
5. theory
6. Gkarmadi
Reply
Old May 26, 2008 | 09:19 PM
  #8  
thewird's Avatar
Lives on the Forum
Tenured Member: 15 Years
iTrader: (8)
 
Joined: Oct 2006
Posts: 6,604
Likes: 17
From: Toronto, Canada
I'm in, would be nice to get numbers with exact same circumstances for all cars.

1. ScrappyDoo
2. jim kutschke
3. 7_rocket
4. drezjdmrx7
5. theory
6. Gkarmadi
7. thewird

thewird
Reply
Old May 27, 2008 | 10:10 AM
  #9  
classicauto's Avatar
Crash Auto?Fix Auto.
Tenured Member 15 Years
iTrader: (3)
 
Joined: May 2003
Posts: 7,831
Likes: 2
From: Hagersville Ontario
Yeah I'd be down if its all sorted by then. Count me in tentitevly - however the hell you spell that
Reply
Old May 27, 2008 | 11:06 AM
  #10  
silverrotor's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Mar 2002
Posts: 7,592
Likes: 5
From: Toronto, Corporate Canada
Thats - tentively.

Good of you to put this together. If work doesn't get In the way than I'll be more than happy to attend as a spectator.
Reply
Old May 27, 2008 | 11:16 AM
  #11  
HEVNSNT's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (3)
 
Joined: Oct 2001
Posts: 2,001
Likes: 1
From: Kitchener/Toronto
1. ScrappyDoo
2. jim kutschke
3. 7_rocket
4. drezjdmrx7
5. theory
6. Gkarmadi
7. thewird
8. hevnsnt (spectating)
Reply
Old May 27, 2008 | 11:45 AM
  #12  
classicauto's Avatar
Crash Auto?Fix Auto.
Tenured Member 15 Years
iTrader: (3)
 
Joined: May 2003
Posts: 7,831
Likes: 2
From: Hagersville Ontario
Originally Posted by silverrotor
Thats - tentively.

Good of you to put this together. If work doesn't get In the way than I'll be more than happy to attend as a spectator.
Oh come on Tony, strap it DOWN~!!!11!!

How is the ol' girl anyways?
Reply
Old May 27, 2008 | 01:09 PM
  #13  
Bass's Avatar
Grey-Bruce Rotorhead
Tenured Member 15 Years
 
Joined: Apr 2002
Posts: 1,484
Likes: 0
From: Chesley, Ontario, Canada
My engine should be broken in by then. I'll be looking for higher numbers than last time.
Reply
Old May 27, 2008 | 01:33 PM
  #14  
pd_day's Avatar
Spoolin'
Tenured Member: 25 Years
Liked
Loved
iTrader: (6)
 
Joined: Mar 2001
Posts: 2,803
Likes: 45
From: Miss.
Is this going to be a 2wd or 4wd dyno?
Reply
Old May 27, 2008 | 02:47 PM
  #15  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Depends on where it is...
Reply
Old May 27, 2008 | 02:57 PM
  #16  
ScrappyDoo's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2004
Posts: 1,855
Likes: 0
From: Woodbridge, Ontario
Originally Posted by pd_day
Is this going to be a 2wd or 4wd dyno?
I was only looking for a 2wd dynojet and I have made tentative arrangements but I can inquire about 4wd locations if there is interest.
Reply
Old May 27, 2008 | 03:16 PM
  #17  
R.P.M.'s Avatar
Likes to swear....alot
Tenured Member 15 Years
iTrader: (3)
 
Joined: Dec 2002
Posts: 3,791
Likes: 3
From: Kitchener Ontario Canada
Try Paul at Neetronics or Marco at Magnus. Both have 4wd dyno's.
Reply
Old May 29, 2008 | 11:01 AM
  #18  
silverrotor's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Mar 2002
Posts: 7,592
Likes: 5
From: Toronto, Corporate Canada
Would you believe I'm waiting on those GReddy gauges I ordered from August 13 of last year?! Apparently, all of North America are on back order for the new style ones. Titan Motorsports assures me they will be here this week! After this I'll close the cabin up, fill the fluids up and she rides! All this before a 4-wheel alignment.
Reply
Old May 29, 2008 | 01:40 PM
  #19  
classicauto's Avatar
Crash Auto?Fix Auto.
Tenured Member 15 Years
iTrader: (3)
 
Joined: May 2003
Posts: 7,831
Likes: 2
From: Hagersville Ontario
blignin' can't wait!
Reply
Old May 30, 2008 | 01:03 AM
  #20  
vipernicus42's Avatar
Rotoholic Moderookie
Tenured Member: 20 Years
iTrader: (4)
 
Joined: May 2002
Posts: 5,972
Likes: 37
From: Ottawa, Soviet Canuckistan
$40 for two pulls is a good price. If I have a few mins to swap carbs between runs count me in. I want to do a stock carb and manifold vs. my Sterling and ported manifold comparison (literally takes 3 minutes to swap)

Jon
Reply
Old May 30, 2008 | 01:39 PM
  #21  
solomsp's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Apr 2008
Posts: 41
Likes: 0
From: Ontario
I'm interested pending on location!

Proteges can come too right?
Reply
Old May 30, 2008 | 03:43 PM
  #22  
ScrappyDoo's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2004
Posts: 1,855
Likes: 0
From: Woodbridge, Ontario
^^^Sure the more the merrier. I will confirm everything on Monday.
Reply
Old Jun 6, 2008 | 07:53 AM
  #23  
ScrappyDoo's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2004
Posts: 1,855
Likes: 0
From: Woodbridge, Ontario
Sorry for the delay. It has been very difficult to secure the pricing I got last time with the limited interest we have this time. I am going to speak with one more shop today to see if we can make it happen.
Reply
Old Jun 12, 2008 | 05:29 PM
  #24  
solomsp's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Apr 2008
Posts: 41
Likes: 0
From: Ontario
any updates?
Reply
Old Jun 15, 2008 | 08:41 PM
  #25  
theory's Avatar
Rotary Dynamics
Tenured Member 10 Years
iTrader: (5)
 
Joined: Aug 2005
Posts: 610
Likes: 0
From: Stoney Creek,Ontario
Think this will still be happening on saturday?
Reply



All times are GMT -5. The time now is 04:50 AM.