Canadian Forum Canadian users, post event and club info here.

The Flying Pig Returns!!!!!!!

Thread Tools
 
Search this Thread
 
Old Jan 26, 2009 | 09:07 AM
  #1  
23Racer's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
 
Joined: Jul 2003
Posts: 2,199
Likes: 9
From: Oakville, Ontario
Talking The Flying Pig Returns!!!!!!!

I wanted to let you guys know that the flying pig (a.k.a. #23 GTB RX7) will be returning to the track at Mosport during the May 15-17 2009 weekend. Our plan is to run the car in the 3 Hour Sundown GP Endurance race. The car has always been a great long distance racer as it is so easy on tires and brakes and with its bigger power now, it should be a lot easier to pass cars on the straights rather than relying on dive bombing them in the corners.

I may also install my ginormous gas tank to ensure that we can get an hour and a half on a tank of fuel. I will inform everybody as we get closer to the date to confirm my co-driver, sponsors etc..... Heck if I can snag a couple of more drivers and some more cash, I may run both cars!!!!!
Attached Thumbnails The Flying Pig Returns!!!!!!!-crda07a.jpg   The Flying Pig Returns!!!!!!!-cel08_0192.jpg  
Reply
Old Jan 26, 2009 | 09:45 AM
  #2  
R.P.M.'s Avatar
Likes to swear....alot
Tenured Member 15 Years
iTrader: (3)
 
Joined: Dec 2002
Posts: 3,791
Likes: 3
From: Kitchener Ontario Canada
Well Eric, we need to Full-Bridge that bad boy and put my Carbon Apex seals in it.

Then I'll drive it

Glad to hear its coming back!
Reply
Old Jan 26, 2009 | 10:04 AM
  #3  
23Racer's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
 
Joined: Jul 2003
Posts: 2,199
Likes: 9
From: Oakville, Ontario
Sure Joe, if you will do it for free, LOL. My money for this year is to finish off the Cougar properly and then run the heck out of both cars at Lapping Days and Race Days. I want to get into the 1:36's in the RX7 and try for a 1:34 or lower in the Cougar and get some shiny stuff.

If I can get some $pon$or$hip, then I will look into upgrading the cars.

Before I can run the RX7 I need to replace the harness, before I can race the Cougar I need to rebuild the Transaxle, replace the harness, put on my new bodykit and finish off the paint on the car.

As well with the new speed of both cars, the Cougar is doing well over 140 mph going into turn 8 at Mosport, I am looking at getting a new Hans Device. It is a bit of a choke at spending almost $1,000 CDN to get one, but my neck is worth it.

I also need to get new tires for both cars. Both cars have 2 sets of Toyo's 1 Rain and 1 dry, but all the sets are over 4 years old and have lost a lot of stick.

Eric
Reply
Old Jan 27, 2009 | 05:49 PM
  #4  
IAN's Avatar
IAN
Rotary Reborn!
Tenured Member 20 Years
iTrader: (3)
 
Joined: Mar 2001
Posts: 5,284
Likes: 9
From: Canada
Awesome. Should see you out there.......
Reply
Old Jan 27, 2009 | 05:59 PM
  #5  
thewird's Avatar
Lives on the Forum
Tenured Member: 15 Years
iTrader: (8)
 
Joined: Oct 2006
Posts: 6,603
Likes: 15
From: Toronto, Canada
Originally Posted by IAN
Awesome. Should see you out there.......
Better keep that promise

thewird
Reply
Old Jan 29, 2009 | 08:36 AM
  #6  
23Racer's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
 
Joined: Jul 2003
Posts: 2,199
Likes: 9
From: Oakville, Ontario
Ian, does this mean that we may see you on track ??????!!!!!!!!!!!

Oh, boy that will be a ton of fun to race with you and oh, maybe Nic. Am I right?

Eric
Reply
Old Jan 29, 2009 | 07:55 PM
  #7  
IAN's Avatar
IAN
Rotary Reborn!
Tenured Member 20 Years
iTrader: (3)
 
Joined: Mar 2001
Posts: 5,284
Likes: 9
From: Canada
Originally Posted by 23Racer
Ian, does this mean that we may see you on track ??????!!!!!!!!!!!

Oh, boy that will be a ton of fun to race with you and oh, maybe Nic. Am I right?

Eric

I wish. We decided to see what next year will bring. I may just try enough open track days and maybe rent a car for a track day.

But I will be at all of the track events helping with my friends race car so hopefully I will see you out there......
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM




All times are GMT -5. The time now is 04:37 AM.