Canadian Forum Canadian users, post event and club info here.

East Coast Tuning session 2017. Who's interested?

Thread Tools
 
Search this Thread
 
Old May 3, 2017 | 08:23 AM
  #51  
H_M's Avatar
H_M
Senior Member
Tenured Member: 10 Years
Liked
Loved
iTrader: (7)
 
Joined: Nov 2015
Posts: 626
Likes: 95
From: CanuckVille
Can you change me to a "Maybe" because I may not have the car ready in time. I found an oil drip/leak last night and it looks like it's coming from the oil pan or rear turbo return. I'll try to narrow it down this weekend and see where the oil is coming from. I just don't want to show up with a car that leaking oil all over the place.
Reply
Old May 4, 2017 | 06:27 AM
  #52  
HalifaxFD's Avatar
Thread Starter
GT3574R equipped
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Mar 2007
Posts: 1,174
Likes: 1
From: Bedford, Nova Scotia
Originally Posted by H_M
Can you change me to a "Maybe" because I may not have the car ready in time. I found an oil drip/leak last night and it looks like it's coming from the oil pan or rear turbo return. I'll try to narrow it down this weekend and see where the oil is coming from. I just don't want to show up with a car that leaking oil all over the place.
No problem, hope you can get it sorted. If it turns out to be the oil pan, I wouldn't think it would be a deal breaker for the tune. Leaky pans are quite common.
Reply
Old May 4, 2017 | 06:51 AM
  #53  
$lacker's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (9)
 
Joined: Mar 2010
Posts: 1,087
Likes: 15
From: Canada
Originally Posted by H_M
Can you change me to a "Maybe" because I may not have the car ready in time. I found an oil drip/leak last night and it looks like it's coming from the oil pan or rear turbo return. I'll try to narrow it down this weekend and see where the oil is coming from. I just don't want to show up with a car that leaking oil all over the place.
Have you had the engine mounts unbolted from the engine recently? That often breaks the seal of the oil pan apparently
Reply
Old May 4, 2017 | 06:33 PM
  #54  
thewird's Avatar
Lives on the Forum
Tenured Member: 15 Years
iTrader: (8)
 
Joined: Oct 2006
Posts: 6,603
Likes: 15
From: Toronto, Canada
What RX-7 doesn't have some kind of oil leak lol.

thewird
Reply
Old May 7, 2017 | 02:05 PM
  #55  
H_M's Avatar
H_M
Senior Member
Tenured Member: 10 Years
Liked
Loved
iTrader: (7)
 
Joined: Nov 2015
Posts: 626
Likes: 95
From: CanuckVille
Sorry guys but I'm out. I went for a drive today and the wipers, windows, and starter all stopped working all of a sudden. Car won't start now unless I push start it so I've got to track down that electrical issue as well as the oil leak.
Reply
Old May 7, 2017 | 02:31 PM
  #56  
HalifaxFD's Avatar
Thread Starter
GT3574R equipped
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Mar 2007
Posts: 1,174
Likes: 1
From: Bedford, Nova Scotia
Originally Posted by H_M
Sorry guys but I'm out. I went for a drive today and the wipers, windows, and starter all stopped working all of a sudden. Car won't start now unless I push start it so I've got to track down that electrical issue as well as the oil leak.
You sure, its still 5 weeks away. Lots of time to troubleshoot. I wouldn't give up just yet.
Reply
Old May 7, 2017 | 03:52 PM
  #57  
thewird's Avatar
Lives on the Forum
Tenured Member: 15 Years
iTrader: (8)
 
Joined: Oct 2006
Posts: 6,603
Likes: 15
From: Toronto, Canada
Originally Posted by H_M
Sorry guys but I'm out. I went for a drive today and the wipers, windows, and starter all stopped working all of a sudden. Car won't start now unless I push start it so I've got to track down that electrical issue as well as the oil leak.
If u have aftermarket wheels check your front left wheel well. Common problem tires rub into the body harness.

thewird
Reply
Old May 7, 2017 | 06:16 PM
  #58  
SimonFD's Avatar
Junior Member
 
Joined: Dec 2014
Posts: 14
Likes: 0
From: Fredericton, NB, Canada
Im just down the road buddy, when we get a day off work and from the kids well find the issue, if its the pan the motor comes out in an hour, well get er buddy.
Reply
Old May 8, 2017 | 07:22 AM
  #59  
H_M's Avatar
H_M
Senior Member
Tenured Member: 10 Years
Liked
Loved
iTrader: (7)
 
Joined: Nov 2015
Posts: 626
Likes: 95
From: CanuckVille
Originally Posted by HalifaxFD
You sure, its still 5 weeks away. Lots of time to troubleshoot. I wouldn't give up just yet.
I will try but it's looking grim at the moment.


Originally Posted by thewird
If u have aftermarket wheels check your front left wheel well. Common problem tires rub into the body harness.

thewird
I will check the wiring loom next time that I have some time to work on the car.

The car is running 16x8 wheels and 225/50/16 tires. It is not lowered much with lots of room between the tire & fender liner. I set the car up so that it wouldn't rub even on our terrible roads with 6" deep pot holes.

When I got the car last year, the previous owner had "slammed" it. I inspected the wiring loom in the fenders (thankfully there was no damage), replace both fender liners, added coilovers, and raised the car a good 2"-2.5".


Originally Posted by SimonFD
Im just down the road buddy, when we get a day off work and from the kids well find the issue, if its the pan the motor comes out in an hour, well get er buddy.
Sounds like a plan. I'll FB you when I can get some time. Meanwhile, I'll start checking things.
Reply
Old May 10, 2017 | 07:03 AM
  #60  
PinkRacer's Avatar
Licensed Zip Tie Mechanic
Tenured Member 15 Years
 
Joined: May 2004
Posts: 510
Likes: 2
From: Halifax, NS
I'm in. Just message me the details. The convertible needs to get finished one way or another. I don't check the forum much, no time, so FB or text.
Reply
Old May 10, 2017 | 07:39 AM
  #61  
PinkRacer's Avatar
Licensed Zip Tie Mechanic
Tenured Member 15 Years
 
Joined: May 2004
Posts: 510
Likes: 2
From: Halifax, NS
I need to finish my air to water intercooler setup and a couple of other things. Oy...
Reply
Old May 10, 2017 | 07:43 AM
  #62  
PinkRacer's Avatar
Licensed Zip Tie Mechanic
Tenured Member 15 Years
 
Joined: May 2004
Posts: 510
Likes: 2
From: Halifax, NS
Originally Posted by thewird
​​​​​Nope, its double cause unicorns . Nah, its the same.

thewird
Haha what about a weird frankenstein 6-port with a small turbo and teeny boost? LOL
Reply
Old May 10, 2017 | 10:09 AM
  #63  
PinkRacer's Avatar
Licensed Zip Tie Mechanic
Tenured Member 15 Years
 
Joined: May 2004
Posts: 510
Likes: 2
From: Halifax, NS
John, Fadi may be interested too - giving him the info on the session - he wants to tune his FD w/ Adaptronic
Reply
Old May 13, 2017 | 12:38 PM
  #64  
HalifaxFD's Avatar
Thread Starter
GT3574R equipped
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Mar 2007
Posts: 1,174
Likes: 1
From: Bedford, Nova Scotia
Originally Posted by PinkRacer
John, Fadi may be interested too - giving him the info on the session - he wants to tune his FD w/ Adaptronic
Thanks. I haven't heard anything from him yet. Hopefully he'll be joining the fun.
Reply
Old May 13, 2017 | 12:40 PM
  #65  
HalifaxFD's Avatar
Thread Starter
GT3574R equipped
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Mar 2007
Posts: 1,174
Likes: 1
From: Bedford, Nova Scotia
Just a heads up for everybody, I will be booking the flight for Marco this evening. I'll post the total and break it down accordingly. Thanks.
Reply
Old May 14, 2017 | 07:34 AM
  #66  
SimonFD's Avatar
Junior Member
 
Joined: Dec 2014
Posts: 14
Likes: 0
From: Fredericton, NB, Canada
Bank still hasn't got my money back, but ill be ready to pay Tuesday.

Simon
Reply
Old May 15, 2017 | 05:40 AM
  #67  
HalifaxFD's Avatar
Thread Starter
GT3574R equipped
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Mar 2007
Posts: 1,174
Likes: 1
From: Bedford, Nova Scotia
Marco's flight is booked. He arrives at 3:00pm on Friday June 9th and is leaving on Sunday June 11th at 6:50pm.

The cost of the flight came to $426.55.

We should be able to get 1 or 2 cars tuned on Friday. Who would like to go Friday?
Reply
Old May 16, 2017 | 05:22 AM
  #68  
SimonFD's Avatar
Junior Member
 
Joined: Dec 2014
Posts: 14
Likes: 0
From: Fredericton, NB, Canada
Mine will have to be Saturday please.

Simon
Reply
Old May 16, 2017 | 11:27 AM
  #69  
PinkRacer's Avatar
Licensed Zip Tie Mechanic
Tenured Member 15 Years
 
Joined: May 2004
Posts: 510
Likes: 2
From: Halifax, NS
Yeah I don't think I can do Friday - have to get a trailer and such to bring it in. I could do Sunday first thing tho, so I have time to cook everything for the BBQ on Saturday afternoon.
Reply
Old May 16, 2017 | 12:06 PM
  #70  
sip's Avatar
sip
RHD Track Whore
Tenured Member 15 Years
 
Joined: Mar 2008
Posts: 225
Likes: 1
From: Moncton, N.B. Canada
I'm probably going to need as much time as possible , still trying to get it together but it's looking doubtful.
Reply
Old May 16, 2017 | 08:40 PM
  #71  
HalifaxFD's Avatar
Thread Starter
GT3574R equipped
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Mar 2007
Posts: 1,174
Likes: 1
From: Bedford, Nova Scotia
This is what we have so far:

Friday 5-6pm start time
kylemo

Saturday 9am
SimonFD

Sunday 9am
Pinkracer

Lets see if we can get some more cars added to the list, spread the word.
Reply
Old May 16, 2017 | 08:42 PM
  #72  
HalifaxFD's Avatar
Thread Starter
GT3574R equipped
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Mar 2007
Posts: 1,174
Likes: 1
From: Bedford, Nova Scotia
Originally Posted by sip
I'm probably going to need as much time as possible , still trying to get it together but it's looking doubtful.
Hopefully you can get it ready to go. If there's only a few odds and ends left holding it up, you should bring it down. Many hands make lite work.
Reply




All times are GMT -5. The time now is 07:22 AM.