Does anyone knows the engine torque specs for the cosmo motor, specially the front eccentric shaft bolt . thanks in advance
1- follow rew specs
2-follow t2 specs

 

id follow the t2 one myself

 

I torque em to 100ft lbs.

 

Cool, 100ft Sounds Good To Me, Thanks Guys.

 

I'd say 90ft pounds but that's just me.

 

90ft lbs

 

So Pretty Much I Can Do 80-98ft Lbs

 

I recall something about using loctite too. I forget which colour.

 

The torque on that bolt is not critical. Anything from 80-120 FT-LBS is fine. Any more and you can start to distort a bit of the front stack.

90 FT-Lbs is a happy medium and what I use (also I think it's closest to factory). The key though is to use Loctite. Use blue if you intend to be the next person to tear down the engine, red if it's going to be someone else's job.

 

Last guy who rebuilt my motor used RED. Lets just say if I ever find out who it was, they owe me a breaker bar.

 

Cool I Finished It Today , Thanks For The Replies.

 

Hay people any one Know how much Torque Stock 93- 94 rx7 Have plz hlep

system_6@hotmail.com