Canadian Forum Canadian users, post event and club info here.

[North] York Region 7's

Old Sep 20, 2003 | 02:12 PM
  #26  
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Apr 2003
Posts: 41
Likes: 0
From: Ontario, Canada
At least that red tape is cleared up.
Although nobody has answer my question in the previous post relating to FB's. Oh well.

Neo: Let me know next time a bunch of guys want to meet, I'll see If I can drop a line.
Reply
Old Sep 20, 2003 | 11:39 PM
  #27  
krazykoncepts's Avatar
Rotary Freak
Tenured Member 15 Years
 
Joined: Aug 2003
Posts: 1,790
Likes: 0
From: Toronto
i got a black fc in markham
Reply
Old Sep 21, 2003 | 08:49 AM
  #28  
smnc's Avatar
EliteHardcoreCannuckSquad
Tenured Member 10 Years
 
Joined: May 2001
Posts: 4,126
Likes: 4
From: Acton, Ontario, Canada
Originally posted by Limbrooke
Interesting. There are quite a few FB/SA's floating around. In fact there is a real beauty of a 79 SA. Redone Maroon paint and a rebuilt engine. It used to come to my old gas station but not recently.
Since you own an FB perhaps you could answer a few questions for me? As well any others who'd like to add input or answer is welcomed!
1. Technically can a 6'7" man fit in a FB/SA?
2. Do any FB/SA's come with tilt steering?
1.) I would say safely yes. I'm 5'8", and I have TONS of room behind my seat. Although, I do have 2 recomendations.
A) GSL's and GSL-SE's have higher seats than other models (due to an extra tilt adjustment), especially with the leather option. If you do buy one of those, you may want to look into getting a base/GS model seat.
B) If you get a model with a glass moon roof, that will add a couple more inches of headroom

2.) No, much to my regret, no FB came with tilt steering

There are couple guys in the FB forum who are around 6'7" who fit fine...

Last edited by silverrotor; Sep 21, 2003 at 03:28 PM.
Reply
Old Sep 21, 2003 | 12:31 PM
  #29  
ACTION RT's Avatar
G35 FTW
Tenured Member 10 Years
 
Joined: Dec 2001
Posts: 1,689
Likes: 0
From: Waterloo, Ontario, Canada
krazykoncepts

where you going down woodbine last night?
with a white celica or something?
S5 tail lights?

If that was you, nice car.
Reply
Old Sep 21, 2003 | 08:49 PM
  #30  
krazykoncepts's Avatar
Rotary Freak
Tenured Member 15 Years
 
Joined: Aug 2003
Posts: 1,790
Likes: 0
From: Toronto
ya i was going down woodbine last nite. i dunno about a white celica though. i have a 1990 so ya s5 tails
Reply
Old Sep 30, 2003 | 03:31 PM
  #31  
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Apr 2003
Posts: 41
Likes: 0
From: Ontario, Canada
Originally posted by smnc
1.) I would say safely yes. I'm 5'8", and I have TONS of room behind my seat. Although, I do have 2 recomendations.
A) GSL's and GSL-SE's have higher seats than other models (due to an extra tilt adjustment), especially with the leather option. If you do buy one of those, you may want to look into getting a base/GS model seat.
B) If you get a model with a glass moon roof, that will add a couple more inches of headroom

2.) No, much to my regret, no FB came with tilt steering

There are couple guys in the FB forum who are around 6'7" who fit fine...
Well it seems the car I fit in was a base model (that is I found no such designation on the caer or manual) and it was a bit a tight fit. I had to slide my feet under the pedals to fit. This is with the seat all the way back!
Oh well, I can always get a FC which I kind of perfer anyways. Plus there's tons of room in those baby's! Thanks anyways.
Reply
Old Sep 30, 2003 | 05:27 PM
  #32  
smnc's Avatar
EliteHardcoreCannuckSquad
Tenured Member 10 Years
 
Joined: May 2001
Posts: 4,126
Likes: 4
From: Acton, Ontario, Canada
Np... too bad it didn't work out for you...

base models (S Models) do not have their designation anywhere in their literature or anywhere on the car.
The GS, GSL, GSL-SE (I think the old LS model too) all have identifying badging. So if you see an FB with no badging you know it's a base model
Reply
Old Apr 14, 2005 | 10:59 AM
  #33  
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Apr 2003
Posts: 41
Likes: 0
From: Ontario, Canada
Well I figured, why the heck not revive this thread, which has seemingly all but died. In anycase I don't live in Keswick anymore (so sad) so my dreams of a York Region for me have all but ceased. However, I thought it be nice to see what's been happening on this forum since the last time I was on. I also doubt now that I'm college that I won't be able to buy a car for some time, unless of course I find a well paying job during the break...hahah.

Last edited by Limbrooke; Apr 14, 2005 at 11:01 AM. Reason: More...
Reply
Old Apr 14, 2005 | 11:25 AM
  #34  
ScrappyDoo's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2004
Posts: 1,855
Likes: 0
From: Woodbridge, Ontario
Originally Posted by Limbrooke
Well I figured, why the heck not revive this thread, which has seemingly all but died. In anycase I don't live in Keswick anymore (so sad) so my dreams of a York Region for me have all but ceased. However, I thought it be nice to see what's been happening on this forum since the last time I was on. I also doubt now that I'm college that I won't be able to buy a car for some time, unless of course I find a well paying job during the break...hahah.

Well here is what is happening soon:

Meet Date: Sunday April 24th, 2005

Meet Time: 2PM

Meet Location: Dave & Busters Parking Lot at Hwy400/Hwy7 (From Hwy 400 north, exit Hwy 7 East, Dave and Busters is less than 1/2km on the south side)

For more info: PM 'Lawyer's Spirit'


A good place for you to get back in touch with the GTA scene.
Reply
Old Apr 14, 2005 | 11:49 AM
  #35  
Stewart's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Feb 2005
Posts: 10
Likes: 0
From: Palmerston
Originally Posted by smnc
I bought my previous FB from a guy in Keswick...
Sorry for going off topic here but I noticed you had bought your FB from a guy in Keswick. Back in 1988 I knew a guy in Keswick with a black 85 GSL-SE. lost touch with him - just wondering if it might be the same guy.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ArmAnirx7
West RX-7 Forum
35
Mar 8, 2021 12:54 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:53 PM.