$17,500cdn for a 13b motor??!?
$17,500cdn for a 13b motor??!?
i was bored and started pricing out my dream motor, im sure i missed a couple things, maybe could have went to a couple cheaper parts, hell, even found better prices. but god damn. i could buy a viper motor to drop in there for this price! 
no one said it was cheap i suppose. worst part is, i didnt even touch the rest of the car, suspension, brakes, etc. sky's the limit!
hks to4r 1 a/r__________________$3525.00US.....hksusa.com
hks ext mani____________________$400.00US......hksusa.com
hks 14.2psi 40mm wastegate______$455.00US......hksusa.com
hks fmic kit____________________$1799.00US.....rx7store.net
hks SSQV Blowoff Valve _________$255.00US......hksusa.com
Haltech E6X Flying Lead_________$1395.00CDN....magnusmotorsports.com
Fuel Pressue Regulator__________$163.50US......rx7store.net
Nippondenso 550cc inject (2)____$398.00US......rx7store.net
Nippondenso 850cc inject (2)____$398.00US......rx7store.net
Walbro 255 lph feul pump________$110.00US......rx7store.net
HKS EVC boost controller________$535.00US......rx7store.net
ACT Streetlite Flywheel_________$344.00US......rx7store.net
ACT Xtreme S/S clutch___________$425.00US......rx7store.net
HKS Twin Power Ignition_________$395.00US......rx7store.net
Fluidyne Radiator_______________$445.00US......rx7store.net
hks Downpipe____________________$300.00US......hksusa. com
motor rebuild for street port___$1310.99US....racingbeat.com
misc stuff (shipping..)_________$1500.00CDN
__________________________________________________ ______________
$17647.45CDN TOTAL
bullet proof? prolly 10k worth... 20k if max builds it

no one said it was cheap i suppose. worst part is, i didnt even touch the rest of the car, suspension, brakes, etc. sky's the limit!
hks to4r 1 a/r__________________$3525.00US.....hksusa.com
hks ext mani____________________$400.00US......hksusa.com
hks 14.2psi 40mm wastegate______$455.00US......hksusa.com
hks fmic kit____________________$1799.00US.....rx7store.net
hks SSQV Blowoff Valve _________$255.00US......hksusa.com
Haltech E6X Flying Lead_________$1395.00CDN....magnusmotorsports.com
Fuel Pressue Regulator__________$163.50US......rx7store.net
Nippondenso 550cc inject (2)____$398.00US......rx7store.net
Nippondenso 850cc inject (2)____$398.00US......rx7store.net
Walbro 255 lph feul pump________$110.00US......rx7store.net
HKS EVC boost controller________$535.00US......rx7store.net
ACT Streetlite Flywheel_________$344.00US......rx7store.net
ACT Xtreme S/S clutch___________$425.00US......rx7store.net
HKS Twin Power Ignition_________$395.00US......rx7store.net
Fluidyne Radiator_______________$445.00US......rx7store.net
hks Downpipe____________________$300.00US......hksusa. com
motor rebuild for street port___$1310.99US....racingbeat.com
misc stuff (shipping..)_________$1500.00CDN
__________________________________________________ ______________
$17647.45CDN TOTAL
bullet proof? prolly 10k worth... 20k if max builds it
Last edited by nubian; May 21, 2005 at 12:55 AM.
There are ways around that big price tag... My first large turbo venture had a price tag of about 6500 said and done...Even with the dogmission and feed bumper kit, I am not far passed your tally...Max
and buy some of the stuff used, i got my SSQV for 175 cdn, looked brand new. a hks cast mani can be bought used for about 300 cdn. just don't always need new stuff.
like i said, just dreaming right now anyways, just bought a house, so i prolly wont be doin squat for a couple years. except maintian my mostly stock motor. 6500 total max? im guessin that isnt your newest setup.
That was with the t04e, which actually cost me nearly a 1000 more than my T51 did.., right now I am somewhere in the 22,23K range, which includes 2000 for the car,600 for body repair and I add in the cost of my tig, otherwise I wouldnt have bought it either, so that stuff adds about 5800 to my total right there.. I look at the performance I have for the money, and its a pretty good deal...max
Trending Topics
you need to know how to shop around and get creative. some of that you can go different routes like make it yourself, buy from another source etc. or get a 20b or two for the same price.
My Dream Motor
(not including turbo or any supporting mods, just short block)
Non Turbo Race Rotars X2 ---------------$1148
Type II stationary gear (front)-----------$250
Type II stationary gear (rear)------------$280
3 window bearing--------------------------$50
Carbon Race Apex Seals X6--------------$201
Racing Apex Spring X6---------------------$63
Racing Rotar Bearing X2-------------------$190
J-Bridge Intake------------------------------$918
Race Exhaust--------------------------------$166
Front Aluminum Plate----------------------$1200
Housings X2---------------------------------$1000
Aluminum Intermidiate Plate-------------$1750
Rear Aluminum Plate-----------------------$1425
Alluminum Flywheel------------------------$455
---------------------------------------------------------
Total------------------------------------------$9096
(so far, I have to go to class, I still need a rebuild kit...)(add another $7000 or so for a turbo, $2000 for ecu and sensors, basicly the sky is the limit...)
Edit.
I take back everything i just said, I want this, only $48000
http://www.racingbeat.com/FRmazda2.htm
(not including turbo or any supporting mods, just short block)
Non Turbo Race Rotars X2 ---------------$1148
Type II stationary gear (front)-----------$250
Type II stationary gear (rear)------------$280
3 window bearing--------------------------$50
Carbon Race Apex Seals X6--------------$201
Racing Apex Spring X6---------------------$63
Racing Rotar Bearing X2-------------------$190
J-Bridge Intake------------------------------$918
Race Exhaust--------------------------------$166
Front Aluminum Plate----------------------$1200
Housings X2---------------------------------$1000
Aluminum Intermidiate Plate-------------$1750
Rear Aluminum Plate-----------------------$1425
Alluminum Flywheel------------------------$455
---------------------------------------------------------
Total------------------------------------------$9096
(so far, I have to go to class, I still need a rebuild kit...)(add another $7000 or so for a turbo, $2000 for ecu and sensors, basicly the sky is the limit...)
Edit.
I take back everything i just said, I want this, only $48000
http://www.racingbeat.com/FRmazda2.htm
Last edited by C-Murder; May 27, 2005 at 11:54 AM.
Thread
Thread Starter
Forum
Replies
Last Post
turbo-minivan
General Rotary Tech Support
69
Feb 4, 2016 12:29 AM
sleepydogz
Old School and Other Rotary
8
Oct 4, 2015 03:46 PM







