my s4 build! nz styles
#176
this time of the year its so cold and wet i had a nice day it was sunny as and the kids were not home all weekend so i decided to paint it while i could, pleased i did it has only gotten more cold and wet, it even snowed here witch happened like once in 10 years lol and to be honest bro the paint is 8nzd a can couldn't really care less about the paint lol
#178
what do you mean its not that low apparently. i posted in drifting forum in thread about low fc's i thought it was low but turns out its not.
i like low cars my fist rx7 (a 12aturbo fb) was 47mm off the ground, its just how we roll over here buddy
i like low cars my fist rx7 (a 12aturbo fb) was 47mm off the ground, its just how we roll over here buddy
Last edited by nvmarx; 07-01-12 at 12:19 AM.
#183
rears with 27mm hubsentric spacers made a huge difference, why only 27mm? could have pushed them out wider but 27mm is the legal limit over here, why spacer? because im broke and can not aford nice wheels, why so much camber? because car dosent go so when it dose go it will get a wheel alignment + layzy + cold
my rant for the day
my rant for the day
Last edited by nvmarx; 07-04-12 at 03:04 AM.
#187
Rotary Enthusiast
#189
yea man it really dose i have done many before the guard rolling tool came about you use a hammer with a soft plastic/rubber head and hold your palm on the out side to absorb all the impact, you can get special hammers with a big ball bearing in the head i have never tried one though use this video as a guide bro and you be sweet
#192
small update
toke some rough measurements of the front of the car then went to a wreckers today to see if i could find a front lip that would fit. fount one that looked like it could fit off a 80s Mitsubishi mirage, hot it home hacked it up got it sitting pretty good.
how ever its to short on the sides
so i hacked up the s5 moldings i cut off the turboII side skirts and getting my dad to fiber glass them on
this is what it looked like needs some tweaking with heat gun and what not after i paint it etc etc but you should get the idea,
in other news i have finally got more paint coming have put most of the trim on and cleaned up a few things, selling the e6k haltech ecu pm if you want it. to buy the haltech sprint re
that's all for now
how ever its to short on the sides
so i hacked up the s5 moldings i cut off the turboII side skirts and getting my dad to fiber glass them on
this is what it looked like needs some tweaking with heat gun and what not after i paint it etc etc but you should get the idea,
in other news i have finally got more paint coming have put most of the trim on and cleaned up a few things, selling the e6k haltech ecu pm if you want it. to buy the haltech sprint re
that's all for now
#193
Senior Member
Join Date: Jun 2008
Location: Summerfield,FL
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
no pignose 240sx's in ur bone yards huh? i can't wait to get a pignose lip for my s4 bumper
looking good man, i still can't get over your paint color choice. i love it. j/s keep up the good work
looking good man, i still can't get over your paint color choice. i love it. j/s keep up the good work
#194
paint is ok im not a big fan of flash paint jobs and making every thing shiny lol, cheers bro
#195
small update
hey guys sold my e6k
need help choosing a new ecu
here is a link
https://www.rx7club.com/engine-manag.../#post11165932
side skirts painted
car is painted now and all black trim is on next up is fitting the lights
got a duckbill thanks to this guy, RX7Club.com - View Profile: ROTARY POWERED posted all the way from us to me in little old new zealand test fit
other than the lights and side skirts and front lip that just about wraps it up, onto bigger things like exhaust build and ecu wire in
oh and i want to buy these have to budget for them
17x9 18p Design r(white) x 4 | Trade Me
they look famillir? yes i had a set and i regret selling them!!!
need help choosing a new ecu
here is a link
https://www.rx7club.com/engine-manag.../#post11165932
side skirts painted
car is painted now and all black trim is on next up is fitting the lights
got a duckbill thanks to this guy, RX7Club.com - View Profile: ROTARY POWERED posted all the way from us to me in little old new zealand test fit
other than the lights and side skirts and front lip that just about wraps it up, onto bigger things like exhaust build and ecu wire in
oh and i want to buy these have to budget for them
17x9 18p Design r(white) x 4 | Trade Me
they look famillir? yes i had a set and i regret selling them!!!
#196
Senior Member
Join Date: Jun 2008
Location: Summerfield,FL
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
i understand on the no pignose lips around, i can'tseem to find one here in florida either for a decent price, and by a decent price i mean for under $150usd for one that is beat up and cracked. i just can't justify paying that much for a cracked one. maybe i'll run a volvo lip?
anyhow, im not usually a fan of flashy paint jobs either (even though neon/lime green is my favorite color of all time) but yours looks more like a light olive green green. it's a lighter color but still subtle to me, at least in the pics.
im liking the wheels that your thinking about picking up, but then again i love the r32 wheels. are those gts-t or gtr size? just wondering lol.
anyhow, im not usually a fan of flashy paint jobs either (even though neon/lime green is my favorite color of all time) but yours looks more like a light olive green green. it's a lighter color but still subtle to me, at least in the pics.
im liking the wheels that your thinking about picking up, but then again i love the r32 wheels. are those gts-t or gtr size? just wondering lol.
#197
i understand on the no pignose lips around, i can'tseem to find one here in florida either for a decent price, and by a decent price i mean for under $150usd for one that is beat up and cracked. i just can't justify paying that much for a cracked one. maybe i'll run a volvo lip?
anyhow, im not usually a fan of flashy paint jobs either (even though neon/lime green is my favorite color of all time) but yours looks more like a light olive green green. it's a lighter color but still subtle to me, at least in the pics.
im liking the wheels that your thinking about picking up, but then again i love the r32 wheels. are those gts-t or gtr size? just wondering lol.
anyhow, im not usually a fan of flashy paint jobs either (even though neon/lime green is my favorite color of all time) but yours looks more like a light olive green green. it's a lighter color but still subtle to me, at least in the pics.
im liking the wheels that your thinking about picking up, but then again i love the r32 wheels. are those gts-t or gtr size? just wondering lol.
#198
bought a haltech sprint re off this awsome chap!!
https://www.rx7club.com/members/c-ludwig-639/
and bought some 17inch wheels specs and pic's to come. nothing special they cost me $400nzd with out tyres
https://www.rx7club.com/members/c-ludwig-639/
and bought some 17inch wheels specs and pic's to come. nothing special they cost me $400nzd with out tyres