jimmy13

This is my 88 rx7 na base model I bought this car back in December and this is my first fc but I've been fixing and replacing this and that here and there, but here are some pics from when I first got it till now.

jimmy13

jimmy13

jimmy13

if for some reason the pics don't work click the link below

http://www.facebook.com/media/set/?s...3381664&type=3

that's to my facebook so if you want send me a add.

I will update more as I go

SC-FC

Looking good man, what exhaust and coilovers did you go with?

ImpartialMouse

iTrader: (2)

Looks good. I had a set of HIDs that looked very similiar to yours that I got off ebay and they messed up in 2 weeks.

They were under warranty so I got a new set and never put them on. I gave them to a guy on here and he ran into the same problem. He just took them apart and resoldered and sealed the ballasts and they work fine.

Good luck! Hope to see you running around during the cruise. Maybe we will get lucky and line them up at a stoplight. Last time I went some guy in a white s5 n/a was so cocky that his engine had more horsepower than mine. I smoked him with an extra person in the car =).

jimmy13

godspeed full exhaust and topspeed pro 1 coilovers

haha I think I know who you are talking about but I don't race

jimmy13

more pics, s13 pig nose lip still needs some tweaking but it will work for now

jimmy13

here is what my wing will look like once I get it installed which should be real soon, and I got bored and decided now was a good time as any to go ahead and install the new gauge cluster, the bezel around the cluster and the speedo cable

wing







gauge cluster before



gauge cluster after

jimmy13

fixed my speedo cable - check
new brake calipers and brakes - check
fixed e-brake - check
installed slotted rotors - check
installed aftermarket wing - check
installed new clutch master cylinder - check
installed new slave cylinder - check
installed stainless steel brake lines - check
installed stainless steel clutch line - check

pics















next on the to do list

fixed back racing seat
4 point harness
8 point cage
mmr rear camber kit
mmr mount kit
dual alternator pulley
get a fmic setup to install all my turbo goodies
xxr 532's(but until then some 215/50/16 tires
get some interior pieces I need

I know there is a lot more I wanna do like body work and paint but that and other stuff can wait till I start checking stuff off. I know it will take me awhile but it will be worth the wait on down the road.

jimmy13

alright lets get to updating
powered by max adjustable shift ****
powered by max drift button
new windshield
newish passenger fender
installed side skirts
installed rear half bumper

pics

Broke_A_Baller

iTrader: (26)

nice build...

when you put your car on stands....how solid was it?...I have my fc sitting on four stands as well and for some reason I feel they are too close together..

thanks.

jimmy13

thanks! I've been slowly bringing it back to life.

it seems pretty solid to me I mean I wouldn't give it a big shove or anything but it should be fine chillin out on 4 stands

jimmy13

more low, fenders are rolled and new shoes

nvmarx

iTrader: (1)

what sides and rear over bumper are they bro?

LIMON

iTrader: (8)

looking good, it needs some body fixing soon

jimmy13

I honestly have no idea, I bought them off my buddy and he didn't even know
I would like to find out tho

thanks, it does need some body work but not too worried about that at the moment

ImpartialMouse

iTrader: (2)

Those wheels look much better on your car!
When you decide to get some new coilovers to go lower give me a good price on those.

nvmarx

iTrader: (1)

check out my build thread if you want to know how to make your coil overs lower i have the same as your just no damper adjustment. any shock shop should be able to do it.

your car would be so sick if it was panel beaten and resprayed the red. i really like it! some crown vic's would look mean as well

jimmy13

I checked out your build pretty sick man, I don't have any shops like that near me but I'm pretty happy with the stance it has. My 7 is a 4 lug and probably won't be going 5 lug anytime soon after replacing all that brake work but I do plan on crown vic wheels lol

MazdaMike02

iTrader: (4)

Looks sweet dude, nice build.

jimmy13

thank you I really do appreciate the love


here are a couple better pics

so sad on the dents





this one shows the dent in the passenger headlight cover but I switched both out the other day for much better ones just no pics right now and I was looking at my car and found new dents and what looks like someone took a cup or something and scratched the top of my car looks like I'm gonna start looking for new doors and possibly wide body sometime in the future...

nvmarx

iTrader: (1)

shes pritty beat up bro but i think it looks sick! i much prefer this sort of style to the huge body kits i realy like it man

if i had the readys to get them type of body parts over here mine would look the same expect id keep the duckbill spoiler lol
speaking of would you sell it to me dirt cheap and post it to new zealand? pm me

jimmy13

I'm keeping all my old parts but it looks like a dog used it as a chew toy anyways haha I'll get the dents and all that lined out sometime its just not a priority at the moment.

jimmy13

thank you, much appreciated

I'm gonna keep all my turbo goods but I think I'm gonna go a different route with it, I'm gonna leave it n/a for the time being I might go the turbo route sometime down the road but I really wanna get some t2 housings do a peripheral port and 50mm itb's, on injectors I'm thinking 850cc primaries and 1000cc secondaries any input on injectors would be greatly appreciated. I've been researching since I know some will say to do that I just like getting input on stuff.