Good ruck.

 

just a quick update. yes im still alive albeit a little rough around the edges. i managed to be unemployed for three days but it was apparently not written in the stars that i would be without money to finish this here project so i was called late last wednesday evening and sent on quite short notice to another city approx 3 hours away to work. there is talk of me getting good money for it but of course the proof is in the paycheck

i have now been promised that my engine will be ready this week and the plan is that im going to be travelling home on friday and then returning to work on monday. (driving there sunday evening) so if the promise is kept i will be driving down on saturday and picking up my engine. i wont have time to get much done or i think my other half would be most displeased and one has to prioritise dont'cha know =P

i beseech all who read this to murmer a silent prayer to the god of rotary engines that the arrival of my engine will come to pass and I, in return, will repay you with pictures and descriptions of my mechanical blunders that are sure to happen.

fingers crossed eh?

 

So.. two weeks later and im still waiting for my motor which i must admit despite my attempts to be patient and understanding, is becoming quite irksome.
the last time i spoke with him he said that he had run into a problem and i would have to wait until this week. yeah.. the week thats just gone.
this **** is starting to make me nervous for two reasons..

1. im pretty sure the snow will start falling 'roundabout december which at the moment would give me two and a half months to install the engine, test and troubleshoot and break it in before i start the long wait before warmth and daylight blesses the scandinavian landscape again. (why didnt i emigrate to australia? oh well..whats done is done)

2. its been so bloody long im beginning to wonder if im going to be able to get my brain, (heres a picture of it)



to actually function correctly and remember what i did whilst removing the engine so that i can put it back.

I sincerely doubt that i will be a happy bunny again until i have got my grubby mitts on that 13b and am on my way back to stockholm with it in my boot.
well, thats enough moaning for today. i shall return to checking my phone every 5 minuites for 'that' phonecall...

 

Quite understandable given the builder is being a dick.

Presumably the chassis is fully prepped and ready to go once the engine arrives.

 

im definately having difficulty being able to see the bright side of this deal. i wonder how he would have been towards me if i had stalled with his cash for 3 months? i just hope the engine is proper when i get it..

tbh i havent had a proper look at all the bushings and whatnot, ill have to get down the garage tmrw and have a butchers... i have actually procrastinated somewhat due to being a bit bummed about the engine. engine bay is prepped (providing i havent missed something), i thought id have a go at getting my s13 lip ready considering its been sitting there gathering dust all year.

if theres anything glaringly obvious that you would recommend that i check i would be super appreciative if you let me know, i just caught up with your thread so im sure theres some bits and bobs you can give me to do to pass the time while i wait for my engine =)

 

Oh, come on.
There are probably dozens of piddly little jobs you know should be done but have put off for later.
Well, now is later.

Inspected/repacked front wheel bearings?
Cleaned all bulb sockets and greased them?
Changed diff and trans fluids?
Cleaned/lubed window tracks and relayed the switches (if you have them)?
Etc.
Etc.
Etc.

Until you can say the car is perfect, there's always stuff to do and you don't need us to tell you what the "stuff" is.

 

you know what clokker? your bloody well right and i apreciate your sound advice and patience with my facepalm-worthy questions lol

i stand to have a bit of time off after tmrw so im gna get my *** down to the garage, get that haynes manual out, and start tinkering!

 

Nothing like a little tough love haha

 

"Spare the rod and spoil the fishing" as I like to say.

 

True that! Got called in for more work so i didnt get down to the garage this Week. I have now been told that my Engine will be ready next thursday so we'll see what happens. As you can imagine i have heard this promise so many Times that ill beleive it when i see it. This was not supposed to be a bloody two year project but thats the way it goes sometimes i geuss. As Long as the Engine is in and i have a chance to break it in before the snow falls i should be able to have it ready for spring 2014...

 

Itll be Nice to spend some time getting some things done this Winter. (piddly Jobs) =)

 

OK pseudo-Swede, time to sack up.
Show up at this rapscallions shop with a vaguely threatening, frighteningly erudite backup...maybe Samuel L. Jackson, Ben Kingsley, or you can go nuclear and bring Nicolas Cage.

Ask for the engine- politely but with a tinge of implied menace- and either...
...take possession of completed motor, pay for the work at the agreed upon rate and leave.
...banter ironically and trenchantly with your wingman (you might want to work this out ahead of time), then kill the crooked tradesman in a cinematic manner. Preferably in slow motion.
Slow motion is key.

Scenario #1 gives you a good chance of a running car in the near future but really, as a student of the forum, you know as well as I that a running RX7 is only working as long as it takes to plot the next spectacularly expensive/massively destructive failure.
Why just last week, my carefully pampered car killed a turn signal bulb...just an example of the egregious disregard these cars hold us in.

The second outcome leaves your car disabled in its remote garage (a natural habitat of the Mazda) but gives you an epic story to tell all your twitter followers and probably a date with a Kardashian.

Seems like a no-brainer.

Don't skimp on the slo-mo (or the lens flares).

 

Your posts always make me laugh clok.


And to Meerkat, good luck!

 

Although quite inclined to go with scenario #2,
(it would definately be Samuel l Jackson. "say next Week again muthafukka! I dare you..i double dare you.. Say it again!" ect ect)
the very thought of my beloved 7 ending up like my skyline, which is currently enjoying Nature (yeah loads of crap falling off the trees and getting lodged in every conceivable crevice) without an Engine and MAYBE might get sorted out next year, makes Me feel like im on the verge of a full-on panic attack.

Since my beemer got smashed up in 2009, all i wanted was to have a fun, cool japanese car to be able to experience what its like to own and drive these beautys. The buying and owning part was easy, but WHO the f wants a jackstand racer? Four years of false promises and let downs is beginning to erode my Good humour. Im a stubborn bugger though and by hell or high water, this rx7 Will roll nomatter the cost..
Im sure there are great Engine builders out there, even this Guy definately knows his way around a rotary Engine, but i have yet to meet one that is capable of getting the work they promise to Do done when they say theyre gna Do it!
Scoundrels and Blackgaurds.. the ruddy lot of 'em...

 

@88fc3st2 thanks bro! Fingers crossed =)

 

Thursday has come and gone.
I'd like to see a picture of either the engine or the builder's severed head.

 

+1

 

I sent him a text on tuesday i Think asking for a status update. He Said that he Will be building the Engine on Sunday. I dont rightly know what to do. He has my 13b hostage. This is the second time this is happening to me and its getting really old, really quickly.. When I do get my engine back I shall most certainly shall not be getting anymore work done by this man and he will only have himself to blame...it seems like most car enthusiasts I have spoken to have experienced some kind of similar fuckery in one way or another with an engine builder. I Dont understand what is so difficult. I know for a fact that he is capable of the work so I dont get whats taking so long. The only plausible cinclusion I can come to is that im being thouroughly messed about by a peraon who has absolutely no respect for.other peoples time. He has literally promised me via word of mouth/sms/email that he would be finished like ten times and has not done what he said. From a professional standing, this is not ******* professional..
Yup, im pissed

 

Crossing my fingers for you to get her back and running before the snow hits!

 

Cheers tanakinn im gna need it. Even at my usual snail-like pace i would have come alot further if i had received my motor at the time we agreed upon..

 

Has this wastrel ever given a coherent reason for all the delays?

"I've run into some problems" doesn't count.

 

All summer its been "helping this race team and that race team" then there was something to Do with him importing Another car from southafrica that ran into problems with the freight and whatnot.. I showed patience and understanding for what was obviously my engine having a lower priority than anything else that came along. Then, when I was just about to get it, he rang and said that he had made a mistake and built it with a housing that was not compatible with my intake. He then said that he would have to strip down the engine again, that he had the correct housing but it would need to be sent off for lapping and then he would rebuild it. This has now taken about three weeks. I hasten to add that he Did actually apologize and say that I was a silly mistake to make which I can accept but he did also say that my engine was now top priority (after being three months behind schedule) which further concretes my suspicions that my engine was definately NOT top priority before and it still seems to be taking forever. I have lost complete faith in his ability to keep time. I just hope he doesnt give me cause to lose faith in his abilities as an engine builder. The worst thing is, I decided to put down what is to me alot of money to get my engine done quickly and efficiently. A 3 month wait is acceptable in my book considering I have waited three years for the other one and its still not built,registered,and safety tested. But past a half a year its beginning to look like my other project and I really dont want that. I dont want to argue with people either. This whole situation sucks donkey bollocks...

 

Was this a formal agreement or a "he said/Swede said" kinda deal?

 

i received a quote a couple of days after i had left the engine with him. it goes as follows..

Hej Anthony,
Jag har kollat igenom dina delar idag och mätt rotorer och delar och det håller toleranser och
Är i bra skick till din renovering.
I följande förslag så ingår Alla modifikationer på föregående sida och alla nya delar till motorn.
Förslag:
Blocket helrenoveras enligt de saker vi kom överens om, och skicket på Rotorhusen som vi
inspekterade när du besökte mig i Lördags.
Jag har även gett dig rabatt på vissa tjänster och bjuder dig på några.
Pris: 48.950.-
Inkörning, bromsning, mappning och övrigt tuning av motor ingår ej i ovan priser.
– Dock kan alla dessa tjänster tillhandahållas av oss.
Jag tycker det skulle vara mycket spännande att få bygga en riktigt bra motor till din bil,
och hoppas att detta förslag känns spännande, och vi får dig se dig som kund hos oss.
Normalt behöver jag ha handpenning för att kunna köpa in delar som behövs till motorbygget,
men jag har alla delar hemma och vissa delar har du själv.
- Levaranstid av färdig motor är ca 3-4 veckor.
- Detta förslag är giltigt 10 dagar from 14/4-2013
- Kontant betalning vid leverans av motor
Hör gärna av er om du vill fråga om något,

translation....

hi anthony,
i have i have gone through your parts today and measured your rotors and parts they hold tolerances and are in good condition for your rebuild.

in the following quote all modifications listed in the in the previous page and all new parts for your motor are included.

quote:
the block will be completely rebuilt as to what we agreed on, and the condition of your rotor housings that we inspected when you visited me on saturday.

i have even given you a discount for certain services and i will do some for free.

price:_48.950 (swedish crowns)

breaking in the motor, dyno, mapping and other tuning of the motor are not included in the price listed, saying that we offer these services too.

i think i would be very exciting to build a really good motor for your car,and i hope that this quote feels exciting and we can see you as a customer with us.

normally i need a deposit to be able to buy the parts needed for the rebuild but i have them all here and you have brought some of them yourself

-delivery of completed motor is approximately 3-4 weeks
-this quote is valid 10 days from 14/4/2013
-cash payment upon delivery of the motor

call me if you have any questions.


the work he was going to do is as follows..


Prisförslag på komplett 13B motor för Mazda Rx-7 FC N/A
Angående: Mazda 13B motor
Trimning: Stor Streetport av insug 6-port 6500.-
Mild Avgasportning
Motordelar: Apextätningar, komplett sats 6900.-
Sidotätningar komplett sats 3450.-
Oljeringar, komplett sats 3850.-
Hörntätningar, 12st 1450.-
Fjädrar för oljetätningar, 8st 760.-
Extra starka bultar, 18st 2000.-
Nya lager till motorn, 4st 1800.-
Bra begagnade FC S4 gavlar (Pris 2400/st) 4000.-
Motorarbete: Motorbyggnation 6500.-
Uppmätning av toleranser på alla motordelar (2000.-) 1000
Tvättning av alla motordelar med ultraljud (2000.-) 1000.-
Inslipning av sidotätningar 1200.-
Inslipning av Apextätningar 600.-
Pressning av lager 800.-
Planslipning av 3st gavlar 2800.-
Balansering av vevparti, svänghjul och koppling 3000.-
Gulkromatering av övriga bultar/skruv/muttrar
som inte hör till motorn, det ingår i Motorbygget 800.-
Pressning av oljeregulator och shimsning av
främre för högre oljetryck Bjuder på det
Förbrukningsmaterial: Allt materiel som går åt till motorbyggnationen
såsom färg, packningsmaterial, tätningar, klister 540.-
Totalt: 48950



quote for a complete 13b motor for mazda rx7 fc N/A

concerning; mazda 13b motor

upgrades.
large streetport of intake
mild exhaust port

motorparts.
apex seals, complete set
side seals complete set
oilrings complete set
corner seals 12
springs for oil seals, 8
extra strong bolts 18
new bearings for the engine 4
good used housings 2

engine work

rebuild
measurement of tolerances of all engine parts
washing of all parts with ultrasound
clearancing of side seals
clearancing of apex seals
pressing of bearings
lapping, 3 housings
balancing of crankset, flywheel and clutch
gold-chroming of all other bolts,screws and nuts
that dont belong to the engine, they are included in the rebuild

pressing of oil regulator and shimming of the front for higher oil pressure
(bjuder på det means he did it for free)

materials
all materials that are used for the rebuild such as paint, gasket material seals and (klister) means sticky as far as i know.


thats basicly what he sent me. it had of course his company, name or address on it but im not going to hang him out on the net. i shan't be advertising his services either, fairs fair eh?
does this count as a formal agreement?

 

Yeah, I'd say that's pretty formal.
He's had this since April?