k-barr

Iv had an Fc sitting around for a good few years now sitting around gathering dust so i thought it was about time to start a build thread and get it on the track.
Picked it up a few years ago for around 2k with the intention of putting it on the street, the jobs that the former owner did on it have pretty much made me decide to scrap that idea and build a track car.
This is it anyway.

so first things first. why make this a track car?
the former owner decided it would be a good idea to hack at absolutely every single part of the loom he possibly could.
i found: masking tape....sellotape... duct tape.... about 20 (no joke) layers of electrical tape and last but not least..... thread tape!?!?!?! wtf was this guy on.
the body is ok, the panel work is definitely a home job, not really up to how i would want a street car so Track car it is!!!
Heres a pic of me trying (unsuccessfully) save as much of the loom as possible. it was butchered all the way back to the tail lights.
that black box on the left is a masking tape heater box, i think the guy had a fetish or something.

Anyway, so i recently stripped the inside of the car completely, the carpet was average but all the plastic panels and headlining are in perfect condition so they're for sale if any of you kiwis want it.
then went on and pulled out all the sound deadening

k-barr

onto DKM Fabrication for some subframe modifications...



for this!!

k-barr

cleaning the engine up ready for a rebuild, in true kiwi style its bridgeported with notched housings,



got a water seal kit from Atkins rotary.



needless to say im a little pissed about this, they told me to leave them in their natural position and they will shrink.
that didnt work so im getting some send over from pineapple racing. oh well, **** happens.
at least it gives me some time to repaint everything how i want it while im waiting.

k-barr

May as well throw my daily in here for good measure

rotatrix

Looking good! Are you north island or south island based? I'm one of the few fc race cars down here in chch! Those water seals don't look flash, I was about to order some bits off them shortly, might have to reconsider the oring kit!

k-barr

North island mate, up in auckland. Hope the Fc didn't get too wet last week!

Cuzzynz

sexi!

rotatrix

Luckily im not near the flood zone so allgood cheers!!

x-con

Nice work in-progress , were in Auckland you at ?

k-barr

North shore bruv

x-con

East Auckland here , i got a SE3P myself

this meet is next Thursday on the shore https://www.facebook.com/events/8002..._t=plan_edited

k-barr

cheers mate, right down the hill. might have to come along

k-barr

Update.

cleaded up the housings



put on the first couple of coats of paint. housings will be matte black and plates will be gloss black.




I plan on painting the uim and the lim just to change it up a bit.
should i go gloss or matte??

k-barr

Also, made these, their a little bit rough but it's a track car not a show car so not too worried

k-barr

I had a go at making a v mount, don't have a wielder yet so had to make do with some stainless steel and an angle grinder.
Pretty happy with how the intercooler turned out
Probably need a different/ modified radiator though, the alloy fd one doesn't quite work.




And gave to front cover/ UIM and LIM a quick coat of paint

k-barr

And picked up a set of good condition Tein super streets for 300 so pretty stoked.
Does anyone know what brand/make front wheels are? Need another two for the rear

vipers

iTrader: (8)

looks like a fun project.