Build Threads The place for complete build threads of 1st Gen RX-7s.

tips n tricks. new rx7 owner here

Thread Tools
 
Search this Thread
 
Old May 11, 2012 | 08:46 PM
  #26  
PK_12A's Avatar
Now w/ 12A SP
Tenured Member: 15 Years
iTrader: (3)
 
Joined: Jun 2010
Posts: 538
Likes: 1
From: Collinsville, OK.
^ Yea that sounds like the problem. If the sender has wires to the connector from the sender you may be able to make one with some water proof bullet connectors at each en but, I have not seen them personally.
Reply
Old May 11, 2012 | 09:05 PM
  #27  
1983rx7mikesrx7's Avatar
Thread Starter
1985rx7mikesrx7
 
Joined: May 2012
Posts: 57
Likes: 0
From: oscoda michigan
all after seeing the prices of a new sender i might just run the wires stight to it. lol. cut out my wheel wells today. they where pretty rusted out. doing lil bit at a time.
Reply
Old May 14, 2012 | 04:00 PM
  #28  
Bryant De La O's Avatar
ReNIxxs
 
Joined: Feb 2012
Posts: 7
Likes: 0
From: Riverside
Practice in a parking lot if you want to drift.

make sure the car has oil oil should be around the safe zone middle of dip stick ..

and dont let those revvs drop like its a nothing . i heard high revving and just letting go of the gas to fast can Break the seals .

high rev to 6 once in a while. for motor maintenance if you have been driving to commute.


Reply
Old May 26, 2012 | 04:46 PM
  #29  
1983rx7mikesrx7's Avatar
Thread Starter
1985rx7mikesrx7
 
Joined: May 2012
Posts: 57
Likes: 0
From: oscoda michigan
whats up with the heavy smoke? its been smoking ALOT more the it used to. cold starts are the worst. when i get on it then let off it lets out a big cloud of smoke. compresion is good and im not burning to much oil off eather. any ideas?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM




All times are GMT -5. The time now is 07:53 PM.