Saving a Series 1 1980 RX-7! Project.
#1
Full Member
Thread Starter
iTrader: (4)
Join Date: Jul 2013
Location: New Jersey
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Saving a Series 1 1980 RX-7! Project.
Hello Everyone.
I have been a fan of the RX series for 22 years. My latest project is saving a series 1: 1980 RX-7. I'm doing this car the right way. I recently painted the engine compartment. Below is my YouTube channel if you wish to check out the progress. I appreciate any recommendations and/or help with this project. Thanks for your time in viewing!
Cheers,
RX80-Joe
YouTube Channel: https://www.youtube.com/user/rx80joe
__________________
I have been a fan of the RX series for 22 years. My latest project is saving a series 1: 1980 RX-7. I'm doing this car the right way. I recently painted the engine compartment. Below is my YouTube channel if you wish to check out the progress. I appreciate any recommendations and/or help with this project. Thanks for your time in viewing!
Cheers,
RX80-Joe
YouTube Channel: https://www.youtube.com/user/rx80joe
__________________
#2
Senior Member
iTrader: (1)
Join Date: Mar 2006
Location: Texas
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Hello Everyone.
I have been a fan of the RX series for 22 years. My latest project is saving a series 1: 1980 RX-7. I'm doing this car the right way. I recently painted the engine compartment. Below is my YouTube channel if you wish to check out the progress. I appreciate any recommendations and/or help with this project. Thanks for your time in viewing!
Cheers,
RX80-Joe
YouTube Channel: https://www.youtube.com/user/rx80joe
__________________
I have been a fan of the RX series for 22 years. My latest project is saving a series 1: 1980 RX-7. I'm doing this car the right way. I recently painted the engine compartment. Below is my YouTube channel if you wish to check out the progress. I appreciate any recommendations and/or help with this project. Thanks for your time in viewing!
Cheers,
RX80-Joe
YouTube Channel: https://www.youtube.com/user/rx80joe
__________________
Is all that sh*t brand new? haha
#5
Full Member
Thread Starter
iTrader: (4)
Join Date: Jul 2013
Location: New Jersey
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! The paint was $27 a can. It took 3 cans to do the engine bay, which I had some left over in the 3rd can. I used your basic Krylon Primer / Filler (sealer). I didn't even have to wet sand, since I did a 500 grit on the final sanding before sealer.
Thread
Thread Starter
Forum
Replies
Last Post
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM