Rx7 Rally Car
04-14-13, 11:02 AM
#80
Respecognize!
Thread Starter
spray gun in a booth, but i used "enamel" for tractors thinned out with paint thinner. Also, never painted anything in my life so i kinda just went with it. zero body work, or priming. just scuffed the car up well! good enough for an old beat rally car.
04-26-13, 11:04 AM
#85
Respecognize!
Thread Starter
hey Chris!
Been doing pretty good! Going back to college here soon, putzing with old cars as usually (new bane of my exisitance is hiding there in the back ground). She is nearly rally ready! just need a skid plate and to shorten the drive shaft some.
Been doing pretty good! Going back to college here soon, putzing with old cars as usually (new bane of my exisitance is hiding there in the back ground). She is nearly rally ready! just need a skid plate and to shorten the drive shaft some.
04-26-13, 11:14 PM
#86
Super Cres at best
Join Date: Oct 2002
Location: here, where ever that is.
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Nice rig man. Gives me inspiration to keep on trucking with my rally build. If you end up making it to snodrift next year, I may be able to hook you up with a modest garage an accommodations off 32 a few miles from town and just down the road from the high school.
03-12-14, 11:03 PM
#87
Full Member
Join Date: Feb 2014
Location: Australia
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Mate i love the look of the car! Looks well finished
I thought i would post a picture of the rx7 i rally
Series 2 rx7 13b PP engine, Close ratio gearbox 1:1 5th, 8inch diff, rose jointed rear arms, MCA front coil overs, series 5 turbo brakes other then that pretty stock
This is Dad's new toy, started as a stock 12a powered series 2 rx7. Then the car was fitted with Group B rx7 wide body kit which includes the guards, wing, front and rear bumpers, front apron and bonnet. This car also has plastic windows, toyota 8inch diff, close ratio ZF gearbox, 13b PP with 55mm IDA style throttle bodies, the suspension is custom build MCA coil overs on each corner, the rear control arms are 510mm long which touched the rear of the front seats, and the front suspension has been moved closer to the center of the car and the arms made longer. The engine has a Mazda Factory Race dry sump kit, and the oil cooler is in the rear wing.
It isnt finished currently but its nearly ready for paint now.
BTW mate post some results when you can
Cheers
I thought i would post a picture of the rx7 i rally
Series 2 rx7 13b PP engine, Close ratio gearbox 1:1 5th, 8inch diff, rose jointed rear arms, MCA front coil overs, series 5 turbo brakes other then that pretty stock
This is Dad's new toy, started as a stock 12a powered series 2 rx7. Then the car was fitted with Group B rx7 wide body kit which includes the guards, wing, front and rear bumpers, front apron and bonnet. This car also has plastic windows, toyota 8inch diff, close ratio ZF gearbox, 13b PP with 55mm IDA style throttle bodies, the suspension is custom build MCA coil overs on each corner, the rear control arms are 510mm long which touched the rear of the front seats, and the front suspension has been moved closer to the center of the car and the arms made longer. The engine has a Mazda Factory Race dry sump kit, and the oil cooler is in the rear wing.
It isnt finished currently but its nearly ready for paint now.
BTW mate post some results when you can
Cheers
03-12-14, 11:25 PM
#88
Not too sure what all that bit is about but back to rally FB's ....yeah! Check out this link to this African Rally ; a fellow from Vancouver preps and raced one (maybe two ) cars there , nicely done.
Kenya Airways East African Safari Classic Rally 2013
Kenya Airways East African Safari Classic Rally 2013
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM
