My build...First build I am going to need help
#26
Full Member
Thread Starter
I think what he was getting at was just for inside the frame its self. Does any one know any thing about this Hot start assist? I was also wondering how hard is it to change the clutch slave cylinder? It also seems like I am running really rich just by the sent of my exhaust and tips?
#31
Full Member
Thread Starter
As of right now I had to quit my job because of school and work fighting over me. So, I just started t this new place, so I should be able to work on it a little more. I have replaced the Clutch slave and I now have an e-brake. Next thing I want to get fixed is my exhaust leak.
BTW---wish me luck it well be snowing where I am in Minnesota in the next 2 days so wish me luck. if there is any advice PLEASE put it below. THX
BTW---wish me luck it well be snowing where I am in Minnesota in the next 2 days so wish me luck. if there is any advice PLEASE put it below. THX
#33
Full Member
Thread Starter
Car is doing something messed up!
Ok new problem is happening. When I am going down the highway I am at 50MPH and I am speeding up to 65MPH. The cars RPMs well jump from around 3000 to 4500 and then when I get to around 60MPH the RPMs well go back down to around 3000. I dont change gears I dont let off the gas. What going on? PLZ Help
If need be or if it well help I can post video.
If need be or if it well help I can post video.
#35
hot start assist
sorry to revive an old thread - trying to make use of the search function.
can someone help show me a picture of their hot start system installed/mounted on the car? i have an 84 GSL. attached is a picture of it installed on mine, but the cable has too much slack, and i think might be mounted wrong. Also - i'm missing the 'pin' that holds the cable attached to the hot start assist.
is the hot start assist different from the 'start assist system' that i saw in the parts catalog? in the parts catalog it looks like it should be mounted upright and not sideways?
my part is super old - i read earlier in this thread that you don't need it - can you let me know if i need to remove anything from the carb or can leave it just 'unhooked'?
one more question - does this affect idle at all after the car is started? can't really find much info on this and seems like most people remove it. thanks all.
can someone help show me a picture of their hot start system installed/mounted on the car? i have an 84 GSL. attached is a picture of it installed on mine, but the cable has too much slack, and i think might be mounted wrong. Also - i'm missing the 'pin' that holds the cable attached to the hot start assist.
is the hot start assist different from the 'start assist system' that i saw in the parts catalog? in the parts catalog it looks like it should be mounted upright and not sideways?
my part is super old - i read earlier in this thread that you don't need it - can you let me know if i need to remove anything from the carb or can leave it just 'unhooked'?
one more question - does this affect idle at all after the car is started? can't really find much info on this and seems like most people remove it. thanks all.
Thread
Thread Starter
Forum
Replies
Last Post