1st generation 20b swap project
#78
Thanks Alex...We got to give a big Thanks to Dave at SpeedOne aka KDR. He did a great Job. Car is tuned just to break-in the new motor. Hopefully alex brings it back for more HP.. Alex post the dyno video.. This is one sick 1Gen..
#80
#84
Update 20B was re-open for more porting. On 93 pump gas, Boost Controller off wastgate holds 12lbs. 590hp at the wheel 629 at the motor. We'll need to go over the wiring again, in the video you can see that we had voltage cut off at the end.
Speed1 Tuning By Dave
http://youtu.be/HCbUFnbuxBo
Speed1 Tuning By Dave
http://youtu.be/HCbUFnbuxBo
#90
Lapping = Fapping
iTrader: (13)
I like how far forward your engine is. Most try to move it back as far as they can. Yours is just a bit further forward than mine based on your T2 tranny shifter position. I swapped tail housings to a 1st gen type on my S5 NA trans so I could keep the stock position.
#93
shut up you jack wagon
Update 20B was re-open for more porting. On 93 pump gas, Boost Controller off wastgate holds 12lbs. 590hp at the wheel 629 at the motor. We'll need to go over the wiring again, in the video you can see that we had voltage cut off at the end.
Speed1 Tuning By Dave
20B - YouTube
Speed1 Tuning By Dave
20B - YouTube