RX7 Series 6 Single Turbo project
#51
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Will ask the guy to send me clearer photos, what kind of impact will this have?
If it is going to cause issues then he must source another one and do it properly.
If it is going to cause issues then he must source another one and do it properly.
#52
Hungry for the Power
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
#55
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
#56
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
#57
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
#62
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
#64
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
#65
Senior Member
#66
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
#67
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Here is what I did this weekend.
Striped front bumper off
Striped venders off
Sanded almost all areas of engine bay, just need to do the fire wall and done, will do that on Friday and spray down primer, hopefully get at least one layer of paint on too. Then the rest on Saturday.
Engine should be done this weekend and can therefore go in the following weekend.
Striped front bumper off
Striped venders off
Sanded almost all areas of engine bay, just need to do the fire wall and done, will do that on Friday and spray down primer, hopefully get at least one layer of paint on too. Then the rest on Saturday.
Engine should be done this weekend and can therefore go in the following weekend.
#69
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Ok so was busy this weekend, got lots of photos, enjoy
Engine bay wrapped up and ready for primer
2 x coats of primer done
2 x coats of colour
2 x coats of gloss clear
Colour shift
I started the reassembly of the front wiring harness, rewrapped the entire harness and found some shorted out wires which I took car of, will post some pics of the wiring harness reinstalled.
Engine bay wrapped up and ready for primer
2 x coats of primer done
2 x coats of colour
2 x coats of gloss clear
Colour shift
I started the reassembly of the front wiring harness, rewrapped the entire harness and found some shorted out wires which I took car of, will post some pics of the wiring harness reinstalled.
#74
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
#75
Senior Member
Thread Starter
Join Date: May 2013
Location: Johannesburg, South Africa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts