|
this is a kicker this trips me out I don't want to grab the 100 ft compressor hose so I decided to use the leaf blower for the dust
ready to paint after sanding https://farm2.staticflickr.com/1466/...f5da854a_z.jpg59 by nakahachi, on Flickr |
doing the fender
https://farm2.staticflickr.com/1486/...17cd3f47_z.jpg34 by nakahachi, on Flickr https://farm2.staticflickr.com/1565/...76c86ac3_z.jpg35 by nakahachi, on Flickr sanding the hood now https://farm2.staticflickr.com/1455/...76dddb9c_z.jpg39 by nakahachi, on Flickr it was flaking at the corner so I have to sand it bare metal https://farm2.staticflickr.com/1704/...9629b63e_z.jpg40 by nakahachi, on Flickr https://farm2.staticflickr.com/1607/...5c0dfebd_z.jpg41 by nakahachi, on Flickr done https://farm2.staticflickr.com/1545/...587149f6_z.jpg42 by nakahachi, on Flickr |
now for the fender
https://farm2.staticflickr.com/1714/...d7ded12b_z.jpg43 by nakahachi, on Flickr https://farm2.staticflickr.com/1699/...de30f290_z.jpg44 by nakahachi, on Flickr https://farm2.staticflickr.com/1633/...75a0d1d1_z.jpg45 by nakahachi, on Flickr driver side fender https://farm2.staticflickr.com/1699/...645d52f6_z.jpg37 by nakahachi, on Flickr https://farm2.staticflickr.com/1594/...a632582d_z.jpg38 by nakahachi, on Flickr https://farm2.staticflickr.com/1498/...046f4081_z.jpg46 by nakahachi, on Flickr https://farm2.staticflickr.com/1446/...4f1defaa_z.jpg47 by nakahachi, on Flickr |
time for the door
https://farm2.staticflickr.com/1595/...ca39d76d_z.jpg48 by nakahachi, on Flickr https://farm2.staticflickr.com/1561/...625e864a_z.jpg49 by nakahachi, on Flickr https://farm2.staticflickr.com/1720/...0ced95ac_z.jpg50 by nakahachi, on Flickr https://farm2.staticflickr.com/1649/...94d4256b_z.jpg51 by nakahachi, on Flickr https://farm2.staticflickr.com/1626/...0c4bc7e1_z.jpg52 by nakahachi, on Flickr https://farm2.staticflickr.com/1687/...cec54794_z.jpg53 by nakahachi, on Flickr https://farm2.staticflickr.com/1534/...37d10e03_z.jpg54 by nakahachi, on Flickr |
You're a regular jack of all trades :). I'm sure you save a lot of money doing it all!
|
installing the sideskirts
https://farm2.staticflickr.com/1496/...9ec59790_z.jpg3 by nakahachi, on Flickr https://farm2.staticflickr.com/1534/...1947dd34_z.jpg6 by nakahachi, on Flickr https://farm2.staticflickr.com/1611/...a174abac_z.jpg7 by nakahachi, on Flickr https://farm2.staticflickr.com/1535/...d406184c_z.jpg5 by nakahachi, on Flickr https://farm2.staticflickr.com/1498/...c7d0ce48_z.jpg8 by nakahachi, on Flickr https://farm2.staticflickr.com/1544/...15764fa9_z.jpg9 by nakahachi, on Flickr drilling the screws in https://farm2.staticflickr.com/1599/...3d33317c_z.jpg61 by nakahachi, on Flickr trimming the edge where it connects https://farm2.staticflickr.com/1679/...d211fc97_z.jpg62 by nakahachi, on Flickr https://farm2.staticflickr.com/1608/...a4b9fae5_z.jpg63 by nakahachi, on Flickr https://farm2.staticflickr.com/1478/...7440ba83_z.jpg65 by nakahachi, on Flickr |
this is the hatch im really gonna use clean
https://farm2.staticflickr.com/1467/...eb0585cd_z.jpg10 by nakahachi, on Flickr cleaning it up https://farm2.staticflickr.com/1538/...f29bb89e_z.jpg11 by nakahachi, on Flickr sanding it https://farm2.staticflickr.com/1605/...70864688_z.jpg12 by nakahachi, on Flickr https://farm2.staticflickr.com/1511/...9306ba0c_z.jpg13 by nakahachi, on Flickr https://farm2.staticflickr.com/1513/...fd4da6bb_z.jpg14 by nakahachi, on Flickr https://farm2.staticflickr.com/1508/...a9ab9fec_z.jpg15 by nakahachi, on Flickr https://farm2.staticflickr.com/1712/...dd1b8a7e_z.jpg16 by nakahachi, on Flickr installed https://farm2.staticflickr.com/1712/...dd1b8a7e_z.jpg16 by nakahachi, on Flickr |
wow I didnt realize its been 7 month since i have been working on this car
https://farm6.staticflickr.com/5687/...72b94b2b_o.jpgr27 by nakahachi, on Flickr https://farm2.staticflickr.com/1716/...38088887_z.jpg2 by nakahachi, on Flickr https://farm2.staticflickr.com/1544/...15764fa9_z.jpg9 by nakahachi, on Flickr |
i try to work with what i have but im not sure of having a lot of money to save i didnt have it in the first place :lol:
Originally Posted by DC5Daniel
(Post 12041735)
You're a regular jack of all trades :). I'm sure you save a lot of money doing it all!
|
I would advise removing as much stuff as you can before spraying anything. I'm sure you will re-upholster the seats, but aren't you getting overspray all over your dashboard and interior plastics? I wouldn't think scrubbing overspray off of all that stuff would be a good time. Your show though, brother. I'm just enjoying the ride.
Keep up the good progress. I come to the builds daily for this thread. Not the flashiest, but I bet I'll learn a trick or two. |
no overspray on the dash I cover it with a towel I know how hard it is to remove it takes more time removing it than covering it
This is not the final stage im just tired of looking at it in different colors black white red blue this is still gonna sit for a while parts are scattered everywhere if its not in the car I already got a plan going on but I just dont have the money to to do it once I get the coilovers wheels tand ires then im gonna hit the engine bay
Originally Posted by quichedem
(Post 12042051)
I would advise removing as much stuff as you can before spraying anything. I'm sure you will re-upholster the seats, but aren't you getting overspray all over your dashboard and interior plastics? I wouldn't think scrubbing overspray off of all that stuff would be a good time. Your show though, brother. I'm just enjoying the ride.
Keep up the good progress. I come to the builds daily for this thread. Not the flashiest, but I bet I'll learn a trick or two. |
almost last part of the primer stage
rear bumper removing the lights https://farm2.staticflickr.com/1600/...4a95ec45_z.jpg66 by nakahachi, on Flickr |
https://farm2.staticflickr.com/1715/...18768aaf_z.jpg67 by nakahachi, on Flickr
https://farm2.staticflickr.com/1646/...7a01d498_z.jpg68 by nakahachi, on Flickr trimming the corner https://farm2.staticflickr.com/1632/...1b13bdb3_z.jpg69 by nakahachi, on Flickr https://farm2.staticflickr.com/1524/...98013f06_z.jpg71 by nakahachi, on Flickr better https://farm2.staticflickr.com/1559/...53eb92cd_z.jpg79 by nakahachi, on Flickr https://farm2.staticflickr.com/1651/...b8a73efa_z.jpg72 by nakahachi, on Flickr https://farm2.staticflickr.com/1530/...e5fc7dbe_z.jpg74 by nakahachi, on Flickr have to hammer a little bit https://farm2.staticflickr.com/1535/...1a34d9a4_z.jpg75 by nakahachi, on Flickr https://farm2.staticflickr.com/1658/...3208a2c6_z.jpg76 by nakahachi, on Flickr done https://farm2.staticflickr.com/1539/...686c8e81_z.jpg77 by nakahachi, on Flickr |
more body work
https://farm2.staticflickr.com/1545/...8f8b37b5_o.jpg81 by nakahachi, on Flickr https://farm2.staticflickr.com/1457/...f6eacb47_o.jpg82 by nakahachi, on Flickr https://farm2.staticflickr.com/1677/...2340fe43_o.jpg83 by nakahachi, on Flickr https://farm2.staticflickr.com/1661/...45088d08_o.jpg80 by nakahachi, on Flickr |
after 1 week of doing this side im freaking tired of working on this side
so today im gonna finish it sanding and more sanding till it straightens out https://farm2.staticflickr.com/1588/...d262dec6_z.jpg85 by nakahachi, on Flickr low spots more sanding lol https://farm2.staticflickr.com/1704/...314bb09f_z.jpg86 by nakahachi, on Flickr https://farm2.staticflickr.com/1660/...b9369e32_z.jpg89 by nakahachi, on Flickr its only a spray can so it off course it will still show filler marks but once the actual sealer is sprayed on 3 times it wouldn't show anymore https://farm2.staticflickr.com/1720/...b1ecfeea_z.jpg93 by nakahachi, on Flickr now for the flare more sanding https://farm2.staticflickr.com/1555/...17ba219c_z.jpg92 by nakahachi, on Flickr https://farm2.staticflickr.com/1534/...4dde54cf_z.jpg95 by nakahachi, on Flickr https://farm2.staticflickr.com/1480/...e798ab07_z.jpg96 by nakahachi, on Flickr https://farm2.staticflickr.com/1594/...d7f21347_z.jpg97 by nakahachi, on Flickr finally https://farm2.staticflickr.com/1597/...53a768c6_z.jpg99 by nakahachi, on Flickr https://farm2.staticflickr.com/1522/...cdac0df7_z.jpg98 by nakahachi, on Flickr my roof came in at the dealer but they wouldn't allow pick up since its an internet order still waiting for the roof support so they can ship it all at once next time will be the roof and the door jams |
so the roof came in last night with the bracket
https://farm2.staticflickr.com/1468/...247095a7_z.jpg100 by nakahachi, on Flickr https://farm2.staticflickr.com/1524/...cf9df894_z.jpg105 by nakahachi, on Flickr picked up some descent coils drove to Ontario Thanks Jeremy for the coils worked out a deal with me https://farm2.staticflickr.com/1543/...f8fa0ebc_z.jpg104 by nakahachi, on Flickr took it apart to check how the dampening is and also if its shot but its good https://farm2.staticflickr.com/1536/...fb474ddc_z.jpg103 by nakahachi, on Flickr https://farm2.staticflickr.com/1616/...e4545036_z.jpg101 by nakahachi, on Flickr Im not gonna install the coilovers cause car will be hard to move when working on the engine so it has to wait till later once I got the car on jackstands https://farm2.staticflickr.com/1441/...812339c9_z.jpg102 by nakahachi, on Flickr |
so this morning opened the box
https://farm2.staticflickr.com/1499/...4ef96100_z.jpg108 by nakahachi, on Flickr https://farm2.staticflickr.com/1454/...004f83b0_z.jpg107 by nakahachi, on Flickr snug fit just needs to trim some of the edges and spot weld it https://farm2.staticflickr.com/1587/...af8db225_z.jpg106 by nakahachi, on Flickr |
This thread is amazing. It's quite the inspiration for me to get off my butt and work on mine!
|
I probably have the worst fd out there i had found some descent ones after i bought mine and im still finding some more. But im already hooked on this one so keep moving forward. Some people strip a perfectly running car for no reason lol
I hope i could encourage all people to finish there car thats been sitting for a while Just compare what i have to your car which is way easier to work with
Originally Posted by MaczPayne
(Post 12045196)
This thread is amazing. It's quite the inspiration for me to get off my butt and work on mine!
|
^No kidding. I hope to see this in person sometime when it's done! Sevenstock?
|
Like a phoenix rising from the ashes, literally. Thanks for documenting all the stuff you're doing on this build. Who doesn't love seeing an FD get resurrected from a sure trip to the junker?
|
next year maybe i dont think im gonna make it this year :nod:
Originally Posted by MaczPayne
(Post 12045411)
^No kidding. I hope to see this in person sometime when it's done! Sevenstock?
Originally Posted by Hashiriya
(Post 12045417)
Like a phoenix rising from the ashes, literally. Thanks for documenting all the stuff you're doing on this build. Who doesn't love seeing an FD get resurrected from a sure trip to the junker?
|
so i was working on the sup last night and darn stubborn crank bolt pulley is stuck
so it made me think what if i slap on the volks for now on the fd!!!!! https://farm2.staticflickr.com/1647/...466e0907_o.jpg2 by nakahachi, on Flickr i didnt want to force it and break my tools or breaker bar so will be back tonight for some more tricks i tried heating it up but i ran out of propane https://farm2.staticflickr.com/1559/...960eb47e_o.jpg1 by nakahachi, on Flickr so this morning was hype out feeling better cause of allergies been sneezing a lot https://farm2.staticflickr.com/1685/...e1bdd61f_o.jpg3 by nakahachi, on Flickr 19x12 1/2 with 315 25 19 while at it i removed the old shocks and slapped on the teins i got 45 mins to do this got to drop off my son in school https://farm2.staticflickr.com/1713/...b22d7ffe_o.jpg8 by nakahachi, on Flickr https://farm2.staticflickr.com/1487/...be7a2553_o.jpg9 by nakahachi, on Flickr https://farm2.staticflickr.com/1503/...0bd2b68b_o.jpg10 by nakahachi, on Flickr freaking nice https://farm2.staticflickr.com/1661/...fd0ffd73_o.jpg11 by nakahachi, on Flickr https://farm2.staticflickr.com/1579/...31b89338_o.jpg12 by nakahachi, on Flickr |
and the fronts 19x10 1/2 265 30 19
https://farm2.staticflickr.com/1476/...f4f6b1f2_o.jpg13 by nakahachi, on Flickr https://farm2.staticflickr.com/1451/...ce6f18ea_o.jpg14 by nakahachi, on Flickr https://farm2.staticflickr.com/1656/...22254c21_o.jpg17 by nakahachi, on Flickr and i ran into an issue studs are short !!!! bummer now i have to replace it but if i use my 18 volks gtu i wont need it https://farm2.staticflickr.com/1627/...deec1782_o.jpg16 by nakahachi, on Flickr https://farm2.staticflickr.com/1651/...d9c81c54_o.jpg15 by nakahachi, on Flickr heres the sup lol!!! https://farm2.staticflickr.com/1700/...6d6b44c4_o.jpg18 by nakahachi, on Flickr |
i also decided to yank out the engine to do some oil pan mod
https://farm2.staticflickr.com/1667/...f81f5dab_o.jpg4 by nakahachi, on Flickr https://farm2.staticflickr.com/1688/...26ed3006_o.jpg6 by nakahachi, on Flickr https://farm2.staticflickr.com/1628/...4ac6e50b_o.jpg7 by nakahachi, on Flickr |
That engine and trans look beat. Can't wait to see where that goes. Keep bangin'!
|
oil leaks everywhere
will be fabricating an oil pan soon and mounting it car is done with its shoes on :nod:
Originally Posted by quichedem
(Post 12046261)
That engine and trans look beat. Can't wait to see where that goes. Keep bangin'!
|
so today I bought some extended studs locally
store is from ebay but talked to them I could just pick it up and they said yes yes cool https://farm2.staticflickr.com/1617/...bce33bdc_z.jpg38 by nakahachi, on Flickr started to take out the rotors https://farm2.staticflickr.com/1546/...c89b1bb4_z.jpg31 by nakahachi, on Flickr https://farm2.staticflickr.com/1512/...02ffc19b_z.jpg32 by nakahachi, on Flickr don't need to take this get pressed you can used a vise grip open nut a long washer and a little bit of muscle https://farm2.staticflickr.com/1589/...be1cdd93_z.jpg46 by nakahachi, on Flickr my technique you have to install the brakes so the vise grip would have some leverage when tightening the nut until it goes halfway https://farm2.staticflickr.com/1609/...fd17ce03_z.jpg45 by nakahachi, on Flickr after you do all of them install the rotors https://farm2.staticflickr.com/1662/...1156a715_z.jpg44 by nakahachi, on Flickr then jam a screwdriver when tightening you will be able to tell if its tight enough cause you can turn it anymore https://farm2.staticflickr.com/1498/...bf0e808a_z.jpg43 by nakahachi, on Flickr and there you go this is 50mm by the way https://farm2.staticflickr.com/1693/...43b23354_z.jpg42 by nakahachi, on Flickr installing the tires back https://farm2.staticflickr.com/1529/...d1d74a27_z.jpg41 by nakahachi, on Flickr its dark and a little bit high cause there is no engine https://farm2.staticflickr.com/1698/...13a9e96a_z.jpg39 by nakahachi, on Flickr |
so this morning I forgot to fix the passenger side skirt and fender door is hitting on it
I have to trim down a little bit https://farm2.staticflickr.com/1443/...b6ec8e85_z.jpg113 by nakahachi, on Flickr bolting it up https://farm2.staticflickr.com/1716/...3f68aae3_z.jpg114 by nakahachi, on Flickr checking it all good https://farm2.staticflickr.com/1620/...2a78e2da_z.jpg115 by nakahachi, on Flickr closes opens fine now https://farm2.staticflickr.com/1478/...dbd443bd_z.jpg116 by nakahachi, on Flickr |
so i borrowed my wifes dslr camera and just playing at 4 corners
https://farm1.staticflickr.com/767/2...167fcf57b1.jpgr1 by nakahachi, on Flickr https://farm1.staticflickr.com/589/2...6895a42f3d.jpgr25 by nakahachi, on Flickr https://farm6.staticflickr.com/5759/...a935ec5abb.jpgr28 by nakahachi, on Flickr and reborn https://farm2.staticflickr.com/1687/...dafabf7c_k.jpgIMG_2733 by nakahachi, on Flickr https://farm2.staticflickr.com/1553/...52313794_k.jpgIMG_2734 by nakahachi, on Flickr https://farm2.staticflickr.com/1486/...c08c4f1f_k.jpgIMG_2735 by nakahachi, on Flickr https://farm2.staticflickr.com/1608/...3ef3ae25_k.jpgIMG_2736 by nakahachi, on Flickr |
so I moved the car to the other side just to get a clearer mind
too much sh!@#$ next to it https://farm2.staticflickr.com/1686/...a47e0448_z.jpg1 by nakahachi, on Flickr have to start on the engine im cool with the body for now fd trans on the right still debating if im gonna use this cause theres a lot of mod involve specially the trigger sensor wheel is on the flywheel this is the killer here aside from the fd is a pull type I couldn't find a bellhousing for the 2200 also so theres a lot of factors to consider I don't want get a standalone maybe later want to get it running on stock ecu and just throw in a piggyback for tuning cause I m gonna go boosted on this compared to the existing transmission all I got to do is extend the shifter custom driveshaft and trans mount https://farm2.staticflickr.com/1527/...02c551d1_z.jpg2 by nakahachi, on Flickr checked the spark plugs still good https://farm2.staticflickr.com/1719/...798b4d8f_z.jpg6 by nakahachi, on Flickr did a compression test but my battery is dead so I just did a leakdown all cylinders are good https://farm2.staticflickr.com/1541/...d1d7a65f_z.jpg7 by nakahachi, on Flickr started taking it apart https://farm2.staticflickr.com/1523/...3322dc86_z.jpg4 by nakahachi, on Flickr https://farm2.staticflickr.com/1621/...b33c4e6d_z.jpg3 by nakahachi, on Flickr this is where the trigger sensor on the bellhousing connected to the flywheel this is weird how they designed it https://farm2.staticflickr.com/1465/...b1509ecd_z.jpg5 by nakahachi, on Flickr https://farm2.staticflickr.com/1506/...bd167be2_z.jpg9 by nakahachi, on Flickr clutch is shot of course https://farm2.staticflickr.com/1702/...e34215e4_z.jpg8 by nakahachi, on Flickr https://farm2.staticflickr.com/1636/...f5e7e010_z.jpg10 by nakahachi, on Flickr took the oilpan out https://farm2.staticflickr.com/1643/...09d80262_z.jpg11 by nakahachi, on Flickr so I can measure how much I need to cut it around 2 1/2 front and 2 3/4 rear oil pick is slanting gowing down https://farm2.staticflickr.com/1677/...8f4c0575_z.jpg12 by nakahachi, on Flickr |
so I couldn't wait till tomorrow so i decided to cut the oil pan tonight
https://farm2.staticflickr.com/1668/...2a17a15c_z.jpg14 by nakahachi, on Flickr https://farm2.staticflickr.com/1519/...90a2f02b_z.jpg16 by nakahachi, on Flickr https://farm2.staticflickr.com/1665/...c7ec705e_z.jpg18 by nakahachi, on Flickr https://farm2.staticflickr.com/1621/...685694ea_z.jpg17 by nakahachi, on Flickr cutting and a lot of cutting https://farm2.staticflickr.com/1553/...e2b88a6e_z.jpg19 by nakahachi, on Flickr grinding the pan for welding cause cant weld it with paint and oil on it https://farm2.staticflickr.com/1452/...7e39ca66_z.jpg23 by nakahachi, on Flickr i gave it an extra so will just trim it when welded https://farm2.staticflickr.com/1587/...b8c6fb1f_z.jpg22 by nakahachi, on Flickr i cant make an engine mount not unless i get this oil pan done |
Impressive 👍🏽
|
Thank you sir :nod:
Originally Posted by Boxer_FD
(Post 12047964)
Impressive 👍🏽
|
still stuck from working on the supra bushings darn...
well just cleaning up the hatch area got some parts from a guy parting out in downtown https://farm2.staticflickr.com/1705/...a3621419_o.jpg1 by nakahachi, on Flickr dust out https://farm2.staticflickr.com/1540/...523cac2a_o.jpg4 by nakahachi, on Flickr https://farm2.staticflickr.com/1473/...844e784f_o.jpg2 by nakahachi, on Flickr https://farm2.staticflickr.com/1524/...91621354_o.jpg3 by nakahachi, on Flickr https://farm2.staticflickr.com/1661/...c249945e_o.jpg5 by nakahachi, on Flickr installed the tail lights too https://farm2.staticflickr.com/1459/...372919c5_o.jpg7 by nakahachi, on Flickr |
wow this is incredible
|
so last night i grab some more parts
people here in LA are like vultures car is almost stripped if i only had the money i could have completed my interior but unfortunately its a first come first serve basis but will just have to wait again i got the engine to occupy my time while waiting some hatch seal trunk cover bose and door trim and knee plastic https://farm2.staticflickr.com/1503/...916c1a75_o.jpg24 by nakahachi, on Flickr https://farm2.staticflickr.com/1478/...e3c9f085_o.jpg12 by nakahachi, on Flickr and a gas complete gas tank ( really needed but i just grab it ) https://farm2.staticflickr.com/1657/...b3e8d2e5_o.jpg13 by nakahachi, on Flickr so i installed the bose system https://farm2.staticflickr.com/1484/...4452836b_o.jpg14 by nakahachi, on Flickr https://farm2.staticflickr.com/1491/...a550f97a_o.jpg15 by nakahachi, on Flickr installed the hatch seal https://farm2.staticflickr.com/1649/...93b29c77_o.jpg16 by nakahachi, on Flickr knee cover https://farm2.staticflickr.com/1674/...3cd9289c_o.jpg18 by nakahachi, on Flickr https://farm2.staticflickr.com/1681/...e61a7e89_o.jpg19 by nakahachi, on Flickr and the passenger door trim https://farm2.staticflickr.com/1719/...bd82c20f_o.jpg8 by nakahachi, on Flickr https://farm2.staticflickr.com/1713/...6505712f_o.jpg9 by nakahachi, on Flickr https://farm2.staticflickr.com/1531/...0e4f3f26_o.jpg10 by nakahachi, on Flickr small things really does make a difference https://farm2.staticflickr.com/1599/...1ff7bfb6_o.jpg11 by nakahachi, on Flickr |
and here it is a little bit complete
https://farm2.staticflickr.com/1442/...e6bb2ec5_o.jpg20 by nakahachi, on Flickr will install the gas tank sat and hand brake cables https://farm2.staticflickr.com/1641/...8e1e4cc5_o.jpg21 by nakahachi, on Flickr https://farm2.staticflickr.com/1657/...b3e8d2e5_o.jpg13 by nakahachi, on Flickr i got this carpet from dean two weeks ago havent installed it yet cause i have to take everything out again thanks brother!!! he bought the passenger side front clip https://farm2.staticflickr.com/1474/...29d3bd45_o.jpg17 by nakahachi, on Flickr |
so i finished the bushing last night on the supra but still have to do the timing belt
https://farm2.staticflickr.com/1706/...2d4623bd_o.jpg121 by nakahachi, on Flickr i was itching to install the gas tank so i work on it last night drop the tank https://farm2.staticflickr.com/1582/...4774053f_o.jpg123 by nakahachi, on Flickr https://farm2.staticflickr.com/1529/...c17599cb_o.jpg122 by nakahachi, on Flickr installed the new kinda hard cause this still has gas on it was going out of balance from the floor jack https://farm2.staticflickr.com/1558/...ff4287b5_o.jpg125 by nakahachi, on Flickr also installed the brake lines at the same time https://farm2.staticflickr.com/1621/...b6cfa2d2_o.jpg124 by nakahachi, on Flickr got to wake up the spiders https://farm2.staticflickr.com/1710/...4e417cf2_o.jpg72 by nakahachi, on Flickr |
Please borrow your wife's SLR more often :)
|
she wouldn't let me cause my hands are always dirty :lol:
Originally Posted by 7_rocket
(Post 12049457)
Please borrow your wife's SLR more often :)
|
so this morning cleaned up the carpet
https://farm2.staticflickr.com/1449/...8de13e88_z.jpg1 by nakahachi, on Flickr so this is what im dealing right now bondo dust https://farm2.staticflickr.com/1561/...94619558_z.jpg2 by nakahachi, on Flickr started removing the seat https://farm2.staticflickr.com/1512/...22c28407_z.jpg3 by nakahachi, on Flickr https://farm2.staticflickr.com/1671/...bf83ea75_z.jpg4 by nakahachi, on Flickr https://farm2.staticflickr.com/1456/...ab866086_z.jpg5 by nakahachi, on Flickr https://farm2.staticflickr.com/1698/...babc4fab_z.jpg6 by nakahachi, on Flickr removing the armrest https://farm2.staticflickr.com/1693/...2e01c2bf_z.jpg7 by nakahachi, on Flickr removing the dashboard https://farm2.staticflickr.com/1599/...300c241d_z.jpg8 by nakahachi, on Flickr so here is the half ass carpet I have from the front clip https://farm2.staticflickr.com/1645/...00e43dfe_z.jpg9 by nakahachi, on Flickr |
the jdm carpet is much more finer than the us
https://farm2.staticflickr.com/1457/...abeec4a3_z.jpg10 by nakahachi, on Flickr https://farm2.staticflickr.com/1482/...10902edf_z.jpg11 by nakahachi, on Flickr clean up https://farm2.staticflickr.com/1568/...14130162_z.jpg12 by nakahachi, on Flickr installing the new carpet https://farm2.staticflickr.com/1570/...3aa813c7_z.jpg15 by nakahachi, on Flickr https://farm2.staticflickr.com/1490/...174605b6_z.jpg17 by nakahachi, on Flickr https://farm2.staticflickr.com/1669/...8e74f590_z.jpg16 by nakahachi, on Flickr I realize since the dash is out might as well grab the dash harness at the same time https://farm2.staticflickr.com/1466/...d100235a_z.jpg14 by nakahachi, on Flickr https://farm2.staticflickr.com/1623/...1c57d8a8_z.jpg13 by nakahachi, on Flickr so I hang it for now I forgot how this was installed lol https://farm2.staticflickr.com/1501/...71145622_z.jpg18 by nakahachi, on Flickr |
my son Gabriel went to say good morning to me love him so much and cant wait to take this for a spin with him
he's my inspiration... https://farm2.staticflickr.com/1466/...c084a790_z.jpg19 by nakahachi, on Flickr this wasn't in the plan today but I installed the jdm harness I have so at least I have something to tap with going inside with the right measurement for now one on the left the harness that came with the car it was cut at the ecu area so I still have a spare I need to use the headlight and fuse box so I don't have to make one anymore and just eliminate the once I don't need https://farm2.staticflickr.com/1634/...2ae6b3e9_z.jpg25 by nakahachi, on Flickr https://farm2.staticflickr.com/1573/...af29a2cc_z.jpg26 by nakahachi, on Flickr passenger side first going to the firewall https://farm2.staticflickr.com/1673/...08db7ee3_z.jpg27 by nakahachi, on Flickr then driver side https://farm2.staticflickr.com/1467/...1424ea45_z.jpg28 by nakahachi, on Flickr finished https://farm2.staticflickr.com/1567/...1db3acc8_z.jpg29 by nakahachi, on Flickr https://farm2.staticflickr.com/1608/...640ca24d_z.jpg30 by nakahachi, on Flickr with all this work im doing to the car all is just to mock it up there is nothing solid yet i always think that if i didn't do it, its not gonna get done Im not lazy and theres is on one to help me i have to keep going one step at a time but im happy with the outcome for now |
last year august just a recap of what i did
https://farm1.staticflickr.com/714/2...bae697f88a.jpgr8 by nakahachi, on Flickr https://farm6.staticflickr.com/5732/...2138332b73.jpgr3 by nakahachi, on Flickr https://farm1.staticflickr.com/725/2...f6b4bef339.jpgr6 by nakahachi, on Flickr https://farm6.staticflickr.com/5752/...f16183fa77.jpgr2 by nakahachi, on Flickr https://farm1.staticflickr.com/593/2...611cff74c6.jpgr9 by nakahachi, on Flickr https://farm6.staticflickr.com/5778/...1ae8d63d0d.jpgr21 by nakahachi, on Flickr https://farm1.staticflickr.com/596/2...baa7239a21.jpgr22 by nakahachi, on Flickr https://farm1.staticflickr.com/642/2...96b9f97122.jpgr46 by nakahachi, on Flickr https://farm1.staticflickr.com/767/2...167fcf57b1.jpgr1 by nakahachi, on Flickr |
and now
https://farm2.staticflickr.com/1545/...4eebf49e_k.jpgIMG_2738 by nakahachi, on Flickr https://farm2.staticflickr.com/1678/...9834d550_k.jpgIMG_2739 by nakahachi, on Flickr https://farm2.staticflickr.com/1640/...546b4c64_k.jpgIMG_2744 by nakahachi, on Flickr https://farm2.staticflickr.com/1697/...256eac73_k.jpgIMG_2745 by nakahachi, on Flickr https://farm2.staticflickr.com/1509/...1f31f75a_k.jpgIMG_2740 by nakahachi, on Flickr https://farm2.staticflickr.com/1716/...04c1a0c1_k.jpgIMG_2743 by nakahachi, on Flickr https://farm2.staticflickr.com/1514/...767cd26a_k.jpgIMG_2742 by nakahachi, on Flickr https://farm2.staticflickr.com/1495/...7552dfd4_k.jpgIMG_2747 by nakahachi, on Flickr https://farm2.staticflickr.com/1643/...9663c687_k.jpgIMG_2746 by nakahachi, on Flickr Im happy!!! |
That's great stuff man! Keep up the good work!
|
thanks its not easy but im trying to do my best resurrecting it!!!
Originally Posted by FD_6423
(Post 12050021)
That's great stuff man! Keep up the good work!
|
so theres still light outside at 4 pm so i worked on the transmssion a little bit
testing the fd driveshaft if its gonna fit the getrag one from the kia https://farm2.staticflickr.com/1501/...a154b225_z.jpg15 by nakahachi, on Flickr fd on the right too big wont fit https://farm2.staticflickr.com/1678/...40e8d283_z.jpg16 by nakahachi, on Flickr then i measured the fd transmission https://farm2.staticflickr.com/1714/...da8ba741_z.jpg3 by nakahachi, on Flickr https://farm2.staticflickr.com/1689/...bd678a74_z.jpg4 by nakahachi, on Flickr kia transmission is 6 inches shorter https://farm2.staticflickr.com/1693/...2a89a9a8_z.jpg2 by nakahachi, on Flickr trimming the ends of the trans cause i have to extend the shifter rod https://farm2.staticflickr.com/1602/...981ec16b_z.jpg5 by nakahachi, on Flickr https://farm2.staticflickr.com/1568/...a31d548c_z.jpg6 by nakahachi, on Flickr hopefully this gap is good enough but will find out later https://farm2.staticflickr.com/1654/...42e81bc1_z.jpg7 by nakahachi, on Flickr i found a sheet of metal that i didnt use i ran out of aluminum so this will do https://farm2.staticflickr.com/1497/...13c0bec0_z.jpg9 by nakahachi, on Flickr https://farm2.staticflickr.com/1441/...3dd74b81_z.jpg10 by nakahachi, on Flickr drilling holes for it https://farm2.staticflickr.com/1598/...2044fcdb_z.jpg11 by nakahachi, on Flickr perfect holes https://farm2.staticflickr.com/1538/...fc3312a4_z.jpg12 by nakahachi, on Flickr |
| All times are GMT -5. The time now is 12:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands