When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Roll cage repainted/cleared to perfection with new colors, safety red.<br/><br/>Flares riveted. Rivets smoothed and middle dimples filled w/ putty. Blocking the flares for perfection, not a single damn wave allowed.
Mmmmm....eat off it.
More edibles. Sanded clear down on engine bay, going to reclear when spraying chassis, we want zero imperfections.
Manual conversion, filled all holes w jb weld, cut out seals. New tie rods, end pieces, hardware, and bushings!
Next up:
-Finish blocking the rear fenders
-Install rear subframe/differential/suspension
-Roll car out and clean our booth, wash down w/ water to settle dust, and mask up walls/ceiling
-Paint chassis
-Paint each body panel on its own stand
-Wetsand all peices / Buff
-Paint trim/recondition tail lights etc etc
-Relocate to another area for 4 rotor install/wiring etc
Rear subframe, differential and all suspension components now installed. Just need to slap on the rear calipers/pads and its a fully rolling chassis again.
More pics to come.
This weekend the plan is to have the chassis painted, cleared, and begin wetsanding. Then onto the individual panels
Scoot replica by VIS same as the signature. Def not as original, having done it before but Trying to make this car exactly like the last one, except bigger/improved, so the monsterbox 2.0
02-22-16, 09:02 AM
