A little update , I was cleaning out the turbos and painting the exhaust when i noticed that the primary turbo had quite a bit of shaftplay compared to the secondary . looked like the fins were just about to graze the turbo housings ... so another setback , but maybe its a blessing in disguise . may be a couple more weeks . but I'm gonna try and find a set of N3G1 turbos I hate sidegrading . and the 99 spec N3G1 turbo's have been my goal since I first got the car.
so if anyone happens to have one they wanna sell hah let me know! |
Those will be a nice improvement. I still think you should go single tho :)
|
Originally Posted by Dliverance
(Post 11557075)
Those will be a nice improvement. I still think you should go single tho :)
|
Alright , so a small update.. Got new turbos .. thanks to SMG Racing !
And housings are on the way both should be here tomorrow infact. Also CR7684 My engine builder sent the rotating assembly for my motor to get balanced . no pictures yet. But small update! |
Rotating assembly is READY FOR pick up! Turbos arrived , housings arrived . everything is finally coming together . even got that fuse I blew!
|
Pics or it didn't happen
|
2 Attachment(s)
|
3 Attachment(s)
Attachment 661449
Attachment 661450 Attachment 661451 last one came out really blurry , But well I'm gonna port them today . so I should have some better pics |
2 Attachment(s)
Well Got to work porting the waste gates on the new turbos
Attachment 661406 finally you can see the N3G1 Attachment 661407 on the table ready to disassemble |
1 Attachment(s)
|
2 Attachment(s)
Attachment 661403
I'm upset I forgot ot take a picture of this side when it was finished .ported it upwards so the flap opens up more . And here is the ported waste gate to 1.25 inches Attachment 661404 |
1 Attachment(s)
and back together goes humpty this is my second time porting waste gates I think this one came out alot better I spent alot more time and made sure everything came out well .. so we'll see in a couple of weeks what the results are like
Attachment 661402 |
I can't believe how nice those turbos look. Great buy there dude. I can definitely see a difference from your last port job.
|
Jet hot or swain tech those heat shields! That's what I wanna do!
|
Originally Posted by Barban
(Post 11573518)
Jet hot or swain tech those heat shields! That's what I wanna do!
|
So , now all thats left is the apex seals / gasket set... taking donation! *rattles can*
|
That's the most expensive part lol :drops change in can:
It's looking more and more like your prediction was right. I think I'll be running before you but I doubt I'll be on the road first. |
yeahhh I need a second job .
|
GREAT NEWS EVERYBODY! , all the parts have been ordered for the build!! just waiting for them to get here and then !! time to put it all together! no updates lately PC died .. so no way to upload stuff . apart from using work pC hah
|
2 Attachment(s)
|
I love how clean your fmic looks. You did a really good job on the install.
|
its to big LOL .
|
2 Attachment(s)
A little update! Attachment 660213
APEX SEALLLSSS!!! THEY ARE HERE!! Attachment 660214 ANND OIL METERING PUMP block OFF PLATE , I've had the oil metering pump block off for a while but jsut forgot to put it up ( Thanks to Deliverance for the plate ) |
don't forget the two injector screws
|
yeah , but those arent shiny or anything they arent worht hte trouble of taking a picture , then emailing it to myself then uploading it then putting it on here .LMAO
|
All times are GMT -5. The time now is 12:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands