93' FD Feed Version V. Conversion
07-24-12, 03:28 PM
#78
Full Member
Thread Starter
Join Date: Feb 2012
Location: Las Vegas
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
to slow- do you want the part numbers for the brackets? theres even PNs for the rotors.
curacaosfinest- both, the project started as a street car that would be nice at the track. now its a track car the can be driven in the street
curacaosfinest- both, the project started as a street car that would be nice at the track. now its a track car the can be driven in the street
08-02-12, 07:42 AM
#82
Rotary Enthusiast
iTrader: (3)
Join Date: Nov 2001
Location: michigan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
JK... Thank you for those part nr on the brake stuff.. The Carbon fiber custom mold, i know a company here in Michigan that does amazing work, the same company was on How Do They Do It on the Science channel..
thanks
08-02-12, 10:32 PM
#85
Full Member
Thread Starter
Join Date: Feb 2012
Location: Las Vegas
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
curacaosfinest- I just look around online. the hardest part for me to find still is the ABS unit I have been trying to find for months now. All the JDM parts just had to wait a little while for.
to slow- haha I seen your suspension setup after all the parts were already ordered. The setup is too nice to pass up. =D thanks for the info about the carbon parts. I think I'm going to have to wait, because the time frame is cutting way too close.
We stopped by the body shop today to look at the car and it was looking nice! Went to take pictures but we forgot the sd card. Supposed to stop by this saturday again and the car should be fully PRIMERED ready to paint next week. the body work is taking a little longer than anticipated :/
I'll post up pics this weekend.
to slow- haha I seen your suspension setup after all the parts were already ordered. The setup is too nice to pass up. =D thanks for the info about the carbon parts. I think I'm going to have to wait, because the time frame is cutting way too close.
We stopped by the body shop today to look at the car and it was looking nice! Went to take pictures but we forgot the sd card. Supposed to stop by this saturday again and the car should be fully PRIMERED ready to paint next week. the body work is taking a little longer than anticipated :/
I'll post up pics this weekend.
08-02-12, 10:39 PM
#86
curacaosfinest- I just look around online. the hardest part for me to find still is the ABS unit I have been trying to find for months now. All the JDM parts just had to wait a little while for.
to slow- haha I seen your suspension setup after all the parts were already ordered. The setup is too nice to pass up. =D thanks for the info about the carbon parts. I think I'm going to have to wait, because the time frame is cutting way too close.
We stopped by the body shop today to look at the car and it was looking nice! Went to take pictures but we forgot the sd card. Supposed to stop by this saturday again and the car should be fully PRIMERED ready to paint next week. the body work is taking a little longer than anticipated :/
I'll post up pics this weekend.
to slow- haha I seen your suspension setup after all the parts were already ordered. The setup is too nice to pass up. =D thanks for the info about the carbon parts. I think I'm going to have to wait, because the time frame is cutting way too close.
We stopped by the body shop today to look at the car and it was looking nice! Went to take pictures but we forgot the sd card. Supposed to stop by this saturday again and the car should be fully PRIMERED ready to paint next week. the body work is taking a little longer than anticipated :/
I'll post up pics this weekend.
dont worry body shops always take longer than anticipated...my widebody was supposed to take a month, ended up taking double that
08-04-12, 08:47 PM
#89
Rotary Enthusiast
iTrader: (3)
Join Date: Nov 2001
Location: michigan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
WoW ... that is bad ***, those guys are doing a really good job on your body work. The panel gaps are dead on..
What was the hit on the body work.. 12k + if you don't mind me asking..What is the engine bay getting?
Thanks
What was the hit on the body work.. 12k + if you don't mind me asking..What is the engine bay getting?
Thanks
08-06-12, 07:03 PM
#95
Your AFFLUX Version 5, Herblenny's AFFLUX Version 2 Type R, Fortune_Seven's Veilside Fortune, to_slow's RE-Amemiya AC037 FD, and my RE-Amemiya GT-AD FD would make for one EPIC photo shoot. Now to get everyone to one spot! haha 
(not to mention a few other guys)
Sorry if I missed it, but what color are you painting it and what engine are you going to be using?
(not to mention a few other guys) Sorry if I missed it, but what color are you painting it and what engine are you going to be using?
08-06-12, 07:23 PM
#96
really looking good so far. got a few questions
what are you planning on lowering the with?
also, i've been wondering, the bracing on the cage, the parts with the holes, what are the holes made with? i see they aren't just straight cut holes. they look punched. what do you use to make the holes.
just had to ask. i've been wondering for awhile.
what are you planning on lowering the with?
also, i've been wondering, the bracing on the cage, the parts with the holes, what are the holes made with? i see they aren't just straight cut holes. they look punched. what do you use to make the holes.
just had to ask. i've been wondering for awhile.
08-07-12, 10:36 PM
#100
Full Member
Thread Starter
Join Date: Feb 2012
Location: Las Vegas
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the positive comments
to slow- Thanks man! Heres the last pic i took of the engine bay. This is one of the first things they did on the car. I don't have a more current pic. In some of the pic above you can see in the front wheel wells and in the headlight holes some red. Plan on shaving some of the bay and getting it tucked with a mil-spec harness.
Sm1nts2escape- The kit was really nice, but there was a lot of touching up to get all the body gaps that lined up. Also a lot of reinforcement for the kit was in place too. Also getting a custom skid plate.
Blackadde- All of your cars are badass! But like you said, getting all the cars in one place would be hard. I think you're the only close one. The color is Corsa Rosso, "ferrari red". leaving the color kinda simple. As for whats going under the hood??... I'll let you guys know soon. ;D
funnyscreenname- If you question is " what do i plan on lowering the car with? I posted earlier pics with the cusco coil overs. Also those braces are called gussets man.
ohemgeeitsniko- no the mirrors are ganador. very similar mirrors from the feed ones.
to slow- Thanks man! Heres the last pic i took of the engine bay. This is one of the first things they did on the car. I don't have a more current pic. In some of the pic above you can see in the front wheel wells and in the headlight holes some red. Plan on shaving some of the bay and getting it tucked with a mil-spec harness.
Sm1nts2escape- The kit was really nice, but there was a lot of touching up to get all the body gaps that lined up. Also a lot of reinforcement for the kit was in place too. Also getting a custom skid plate.
Blackadde- All of your cars are badass! But like you said, getting all the cars in one place would be hard. I think you're the only close one. The color is Corsa Rosso, "ferrari red". leaving the color kinda simple. As for whats going under the hood??... I'll let you guys know soon. ;D
funnyscreenname- If you question is " what do i plan on lowering the car with? I posted earlier pics with the cusco coil overs. Also those braces are called gussets man.
ohemgeeitsniko- no the mirrors are ganador. very similar mirrors from the feed ones.