Mixed_88TII

iTrader: (1)

Here is your proof again Austin.

To all this is the second time I've had to make this video.
Austin thinks im trying to scam him on refunding me my money for the ecu.
All i ask is he refund me monies to have it fixed.

http://www.youtube.com/watch?v=ONQmN73jDaQ

Lizo7

iTrader: (11)

Shouldn't you really post this video in the haltech forum first? I'm not trying to take any sides just stating that everything you mentioned in the video could potentially be in the settings not the hardware.

I watched through the whole vid and maybe i didn't hear you say it but i didn't notice any mention of all the settings matching on the "bad haltech" and the known good one. Especially by seeing what it's doing it seems like trigger setup page needs some work, whatever was on the ecu from the PO is certainly not going to work, and even copying from the good ecu may be close but its all dependent on so many factors i doubt it.

Before I got the trigger setup page worked out nicely it was saying my engine was idleing all over the place 1600, 3000 (was idling more like 600). Revving it would produce numbers near and over redline. not to mention it ran like ****.

Put this video up on the haltech sub forum and when somebody watches it that knows their **** they will give you a hundred more things to check before determining the haltech is DOA.

Just some ideas, i'm no expert.

Matt

habu2

He's posting it again because the other Bad Seller thread was closed.

Way to **** of a mod, Mixed...

NeoTuri

iTrader: (2)

Why not get it tested properly with a pulse generator? or did I miss that?

I didn't see the original complaint. The car doesn't start because the RPM reading is not right?

rx7roller02

What is the deal with you?

You were already told to knock it off in your other thread. You were told this because you couldnt follow the rules of the forum. So I closed that thread, and you just keep it coming in this one?

Look, lemme spell it out for you. Here is one of the forum rules that YOU agreed to abide by when you joined this club:

So far, you have done nothing to prove your claims. You posted a thread about the trouble you were having, asking for help...and no one helped. You complained about this ecu in a thread that someone ELSE had to post about YOU when you took their money and didnt ship as promised. And now youre posting it here as well. So, you have mentioned at least on three occasions on this forum that the ecu isnt working as it should. Do you have PROOF that the ecu is damaged? of course you dont....someone here even told you that it looks like a problem with the trigger setup, not a DOA unit. So, do yourself a favor-make this your LAST thread complaining about this seller shafted you. Go find out whats EXACTLY wrong with the thing, and THEN if it is DOA then you PM ME FIRST. And we'll go from there.

I urge you to think more carefully about your conduct on this forum before you arent allowed to conduct yourself here at all anymore. This is at least the second time in no time flat that you ignored the TOS here. Dont go for a third.

turbodrx7

iTrader: (43)

Here is the back story, i posted this in another thread about this member:

A little over a month ago he contacted me about an ECU i was selling. We agreed on a price ($350+shipping) and he told me he would send over paypal in a day or two. I got a pm 2 days later with his phone number, asking me to give him a call. He says that someone was suppossed to paypal him and they never did so he only had $320 bucks. He also said that he was leaving town at the end of the following week and he needed me to get the ECU there ASAP. Even though i should know better by now, i sent the ECU 2 day air so it would get to him in plenty of time. It cost $50 bucks to ship + the $30 he already owed me. So I told him he owed me $80 and he said he would send it in about 2 weeks once he got moved.

2 weeks went by and I didnt hear anything, so i sent him a pm which he did not respond to. At the beginning of this week i sent him another pm and he responded saying that it cost him more to move than he thought and that he would send me the money in about 2 weeks once he got going with his new job. I said that was fine and just to stay in contact with me.

Then i got a text from his fiance saying that he was involved in something with the local authorities in AZ and that she would be sending me the money he owed me. I said that it was not a huge rush and to send it when they had it. She told me it would be sometime after christmas/new years, which i said was fine.

He then tells me that the ECU is faulty because if wont read rpm's correctly and he wants a refund. I told him that i need to see proof of what it is doing and to see that it is actually my ECU. He had a defective Haltech that he purshaced mine to replace.

When i took the ECU out of my car it was working perfectly fine. Now, this ECu did come out of an FD that had a completely different ignition system. The car was set up on 2 MSD coils with the trailing plugs deleted. I know that the CAS on the FC is different then on an FD, correct? maybe this has something to do with it. I dont know anything about Haltech's, but i dont think that is too far fetched to think that he would have work on the map to put it into an FC.

I told him that i would work with him on a refund with him, i just needed to see proof since this member is obviously shady. This thread is right under this one in this section....

https://www.rx7club.com/bad-fugly-members-185/beware-mixed_88tii-879045/

Anyone that has any know how about Haltech's, i would appreciate some input.

-Austin

rx7roller02

as far as I am concerned, this guy is not entitled to one penny back until he can prove two things:

1--that the exact ECU that he received from you is the one that doesnt work
2--that it doesnt work because it is broken, not because it needs to be set up differently.

Until those things are proven here, I dont expect to see one word of anything accusing you of selling him a bad ECU. If I do, it will be deleted and he will get a nice little vacation from this forum for his troubles.

Mixed_88TII

iTrader: (1)

Seriously?!?!?! Your going to ban me for proving what was asked by Austin? Wow thats ******* dumb. Now you wanna throw the Rule book at me. Before you do that go ahead and apply rule # 7 and read word for word every post in that thread about the fenders and then tell me if your still gonna ban me and you will see many members that posted there have violated that rule. Now Regardless of what happened with the fenders I shipped them out. I didnt disappear change my number move or anything. So did i scam him No! Did I cause a fight No! I simply defended myself as i felt necessary by talking shii back. Plain and simple.

Now im trying to resolve a issue with a haltech i bought and everyone wants to put there two cents in. All you are is reading a thread if you have forgotten. Its obvious your not watching the video and looking at what im pointing out as to why i think the unit is bad. So I think I'll go ahead and post the original video's as well.

Like i told Austin this is NOT my 1st haltech. My friends here in AZ have many many years worth of experience with installing / setup / tuning of haltech's on FC's and FD's. Dont try and make me look like the idiot cause you want to carry out sum bullshii that i caused and resolved. U amongst everyone wants to make it personal n its not so why do you continue to make it out that way??

If you wanna talk **** and say what ever you feel to make yourself look like a better person then go ahead. I dont know you or care to know you or ever wanna know you. I dont talk pm chat etc with you...

All i want is a refund and i'll send the unit back asap or a refund to have the unit fixed plain and simple. I provided enough proof to show the unit's defective. Just like austin asked for...

Mixed_88TII

iTrader: (1)

A post i made on AZRX7.COM... http://azrx7.ipbhost.com/index.php?showtopic=11379

So i finally got around to making a video to have proof that i recieved a bad ecu from a Main forum member.

He states it was in perfect working order and was in the FD he purchased for 5yrs. Doesnt even read RPM's accurately.

He stated at one time he knew nothing about the ecu or its history when i questioned him about

it not functioning nor having a map on it when i got it back in Nov. Now he says show him proof so i made video's

with the help of zenki fc (ryan) and his brother sean. We used seans (perfectly running)

FC on 1/24/10 at their house that runs on a e6k

similar to mine. V6.34 and the new V7.07 i got from this guy Austin on the main forum.

Austin says the video could have been made anytime and he has no proof that im not using my old e6k

(which is fried by the way and reads error message RECONNECT TO HALTECH) to scam him.

So heres my proof. Tell me if im or sean and ryan who helped me out if were retarded

and dont know what im / we're talking about / doing.

Mixed_88TII

iTrader: (1)

Honestly, i know nothing about it. It came on a car i bought and i pretty much listed everything for sale right after i bought it. The car it came off of ran and everything so thats weird it doesnt have a map. I know the car wasnt tunned, but i would still think it would have a base map.

Thats basically all i know with it.

-Austin
Quote:
Originally Posted by Mixed_88TII
Hey i have a few questions regarding the e6k...

When i received it, it did not have any maps on it. Did you erase everything?
Also im having a terrible time with it reading RPM's correctly. All i did when i got it
was plugg it in and load up my map.

Also its not the standard Version 6.34 its Version 7.07
Can you just explain your trial with it?
__________________

rx7roller02

Look, lets you and me get some things straight right now. I dont have time for your crap, so I'll get right to the point. Your video does NOT PROVE ANYTHING ABOUT THE CONDITION OF THE UNIT. It only shows what the unit is doing--IT DOES NOT SHOW WHY IT IS DOING IT. As already stated, if it is not properly set up for your specific application it can and will do EXACTLY what it is doing. So ONCE AGAIN, until you can prove that the item is BROKEN, you have no reason whatsoever to be accusing ANYONE of ANYTHING.

You agreed to follow those rules, so who the hell are you to whine and bitch at me when you didnt follow them?


You can stop right there. This isnt about everyone "wanting to put their two cents in". You had two people post genuinely helpful comments and you couldnt even be respectful enough to answer either one of them. So dont come in here bitching at ME about this. Why not address the info that was posted?

What I am, genius, is a moderator of this section, and I am getting sick and tired of pointing out how often you violate the rules of this forum. You would be wise to check yourself....and fast. I am not the one who is violating the very terms of service that I agreed to follow.....and when you come in here acting the way you have lately, you dont have a leg to stand on. Is any of that getting through to you yet?


As already stated, the video only shows what the unit is doing--it does NOTHING to address whether the problem is a broken unit or a bad setup for your specific application. Funny thing, I am not the only one to point this out to you, and while you have nothing to say to anyone who has said that, you keep posting the vid like it will somehow change what we have told you.


Would you like a cookie or something?

What is your malfunction? I point out the rules of the forum and expect you to follow them, and that makes you accuse me of trying to make this a personal issue? I dont know you from anyone, and from the way you have conducted yourself here, I cannot say I am too upset that I dont know you. You have cursed people out, insulted people, posted threatening overtones, and challenged people to stop hiding behind the keyboard and come meet you face to face.....ON A DAMN CAR FORUM. And you SERIOUSLY cannot see why youre getting this treatment? You ACTUALLY have the ***** to blame ME for the response youre getting for your behavior here?

Here's a hint--GROW UP. This isnt the fifth grade playground and you cannot bully people into doing what you want them to do around here.

And again, as a moderator, I have every right to post such an instruction to you. If you have a problem following those instructions, then perhaps youre on the wrong forum. Once more, go consult your terms of service. If you arent going to abide by the rules here, we can always make it so that you arent burdened by those pesky rules anymore, you just say the word sport....My instruction to you about PM'ing me wasnt a suggestion or an option. Let's get that much straight to begin with. You accused someone here of doing something that you have ZERO proof of. Hell, you still cannot even say if the unit is even broken. So UNTIL YOU CAN PROVE THAT IT IS, you had better back it off.

And all I WANT is for you to stop accusing people, stop talking trash to everyone here that doesnt kiss your ***, and start following the rules of this forum. Perhaps one day you'll realize that you would have gotten a LOT more help if only you didnt treat people like crap along the way. Maybe you should think about that a while before trying to respond.

Showing a video of the unit not doing what you want it to do does not in any way show WHY it isnt doing what you want it to do. Two people in this thread posted very constructive ways for you to try to get to the bottom of this. Why the hell are you still whining at me instead of taking their advice and getting to the root of the problem?

dawicka2

LOL..... https://www.rx7club.com/showthread.php?t=879045 this guy has threatened to "beat up" 3 people already.

http://www.youtube.com/watch?v=btRpo...eature=related

john ny

rx7roller02

exactly....but its my fault that people dont trust him...wow, just wow.

Mixed_88TII

iTrader: (1)

Like I told Austin this has nothing to do with TRUST. Im not nor will ever be your friend even if I had a choice... And please point out where i specifically said its your fault?

rx7roller02

Simple....

you came in here insulting several people. Talking trash to them. On two forums at once. Threatening to beat someone up over teh intarwebs. And then you accused ME of making this personal and trying to take sides simply because I didnt stand for your crap.

Thanks for making my decision easier. Enjoy your vacation from the forum. If this continues when you return, the vacation will be a permanent one. Moderator decisions are NOT here for you to criticize or question in threads. And we are CERTAINLY not here for you to talk trash to and insult the way you have done. Good day.

rx7roller02

thread closed, OP banned, if this continues when he comes back his vacation will not be so short next time.