RE-Speed lack of communications
#151
Airframe & Powerplant
iTrader: (2)
Join Date: Apr 2012
Location: California
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
still no response, still no communication, still no effin parts.
BEEN WAITING 6 MONTHS FOR MY ORDER AND COUNTING
o i cannot wait until the 9th!!!!!
you posted this on valentines day for gods sake!
cool story sam, you do a real good job at crying wolf...
i wonder what your next excuse will be.
BEEN WAITING 6 MONTHS FOR MY ORDER AND COUNTING
o i cannot wait until the 9th!!!!!
Well I've finally been able to get my machinist switched over to another person and things should finally be back on track now.
I finally have all the parts ready for the oil fillers. All the oil filler orders should be shipped out tomorrow. (Have about 14 pieces)
The front coil over tops are being machined today and will be done later on today. (22 pieces of those will be done)
Front Big brake kit hub adapters are next on the list, then followed by the rear coil over parts. So if all goes well everyone will have all their parts shipped out by the end of next week!
I finally have all the parts ready for the oil fillers. All the oil filler orders should be shipped out tomorrow. (Have about 14 pieces)
The front coil over tops are being machined today and will be done later on today. (22 pieces of those will be done)
Front Big brake kit hub adapters are next on the list, then followed by the rear coil over parts. So if all goes well everyone will have all their parts shipped out by the end of next week!
cool story sam, you do a real good job at crying wolf...
i wonder what your next excuse will be.
Last edited by 1st_gen7; 03-04-13 at 01:19 AM.
#156
Banned. I got OWNED!!!
iTrader: (3)
So all the parts have finally been machined. That's brake kits and coil overs. The brake kits should all be shipped out Monday with the following tracking numbers:
www.usps.com #'s
Leaving Monday:
Andrew Jenkin - CX473987886CA
Armen Weis - CX473987890CA
Joseph Fister - CX473987912CA
Rob Winter - CX473987926CA
Leaving Mid this week: (The rear coil overs were dropped off to the plating place on Thursday and was told mid this week to pick them up)
Kevin Frank - CX494279551CA
Jack Norman - EE154233522CA
Russ Rosenburg - CX494279548CA
Jelena Antonievich - CC186014378CA
Jozey Hall - CX494279565CA
Brent Badulis - CX473987930CA
These are the numbers for all outstanding orders tracking numbers, and I should be all caught up now with that.
www.usps.com #'s
Leaving Monday:
Andrew Jenkin - CX473987886CA
Armen Weis - CX473987890CA
Joseph Fister - CX473987912CA
Rob Winter - CX473987926CA
Leaving Mid this week: (The rear coil overs were dropped off to the plating place on Thursday and was told mid this week to pick them up)
Kevin Frank - CX494279551CA
Jack Norman - EE154233522CA
Russ Rosenburg - CX494279548CA
Jelena Antonievich - CC186014378CA
Jozey Hall - CX494279565CA
Brent Badulis - CX473987930CA
These are the numbers for all outstanding orders tracking numbers, and I should be all caught up now with that.
#157
Rotary Enthusiast
Join Date: Dec 2001
Location: UK
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
So all the parts have finally been machined. That's brake kits and coil overs. The brake kits should all be shipped out Monday with the following tracking numbers:
www.usps.com #'s
Leaving Monday:
Andrew Jenkin - CX473987886CA
Armen Weis - CX473987890CA
Joseph Fister - CX473987912CA
Rob Winter - CX473987926CA
Leaving Mid this week: (The rear coil overs were dropped off to the plating place on Thursday and was told mid this week to pick them up)
Kevin Frank - CX494279551CA
Jack Norman - EE154233522CA
Russ Rosenburg - CX494279548CA
Jelena Antonievich - CC186014378CA
Jozey Hall - CX494279565CA
Brent Badulis - CX473987930CA
These are the numbers for all outstanding orders tracking numbers, and I should be all caught up now with that.
www.usps.com #'s
Leaving Monday:
Andrew Jenkin - CX473987886CA
Armen Weis - CX473987890CA
Joseph Fister - CX473987912CA
Rob Winter - CX473987926CA
Leaving Mid this week: (The rear coil overs were dropped off to the plating place on Thursday and was told mid this week to pick them up)
Kevin Frank - CX494279551CA
Jack Norman - EE154233522CA
Russ Rosenburg - CX494279548CA
Jelena Antonievich - CC186014378CA
Jozey Hall - CX494279565CA
Brent Badulis - CX473987930CA
These are the numbers for all outstanding orders tracking numbers, and I should be all caught up now with that.
#158
All out Freak!
Join Date: Aug 2004
Location: in a little box on a stick
Posts: 2,300
Likes: 0
Received 12 Likes
on
9 Posts
Its a shame that it took me posting to your facebook account earlier tonight, informing you that a ban was coming unless you got back on this forum, to get a response, Sam. There is no need for this to be happening. I'm at least glad that you got some of these up, but what do we do about the rest?
EDIT--if anyone here is still waiting for parts from Sam and your name is not on the list he just posted, then please post here with the following info:
1--your name
2--what parts you ordered
3--how much you paid
4--when you paid
Thanks
EDIT--if anyone here is still waiting for parts from Sam and your name is not on the list he just posted, then please post here with the following info:
1--your name
2--what parts you ordered
3--how much you paid
4--when you paid
Thanks
Last edited by rx7roller02; 03-09-13 at 08:16 PM.
#160
Rotary Enthusiast
Join Date: Dec 2001
Location: UK
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
To be fair i only ordered a Filler neck on the 22/2/2013 and i did know he was not the most reliable maybe wasn't that wise but its just one of those things, i bought an Xcessive LIM and my stock filler didn't fit so i wanted a decent alternative so i searched and found the Damian Breather thread so i decided that was the way to go . At the time he was replying to e-mails so i thought it was worth the risk. But that said i paid $230 inc shipping for a Filler neck so with it costing that much you would expect a bit better Customer service.
Anyway at least he's making an effort to clear his back log. Bit of a shocking it took threats to get anything from him....
Anyway at least he's making an effort to clear his back log. Bit of a shocking it took threats to get anything from him....
#162
Senior Member
iTrader: (4)
**** poor that this has to be done on an open forum. My name is on the list for the coil over kit, but not the other stuff. I did receive the Moser axles right away, then nothing. Like I've said ad-nauseum, I just want a refund at this point for the rest as I had to source the parts elsewhere (when I got no parts and no response). That request has also been ignored. I don't believe that I'm out of line asking for a refund as the problem was all on the seller's end. This whole transaction will make me very leery of dealing with vendors again.
Kevin Frank
paid 20 Oct 2012
1 X 1978-1985 Rx7, Rear Coil Over Kit
Total289.99000 (Tax:$0.00)
1 X 1984 to 1985 Rear Axle Retainer Plates, Big Bearing Total39.99000 (Tax:$0.00)
1 X 1984 to 1985, Moser Axles, Pair (received)
Total365.00000 (Tax:$0.00)
1 X 1979-1985, Rear Lower Control Arm Kit. Total249.99000 (Tax:$0.00)
----------------------------------------------------------------
SHIPMENT FEE (ServiceShip DateDelivery DateExpedited US Business2012-10-222012-10-29 )
Total : $122.48 (Tax : $0.00)
PAYMENT FEE (Paypal / Credit Card )
Total:$0.00 (Tax : $0.00)
----------------------------------------------------------------
TOTAL : $1,067.45
(Tax : $0.00)
#169
Junior Member
iTrader: (1)
Join Date: Apr 2012
Location: British Columbia
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Ordered my front big brake kit roughly two weeks ago and have been in communication with Sam via Facebook throughout the process. Everything was shipped today including custom spacers as I'm sticking with 4 bolt hubs. Thanks Sam!
#170
Airframe & Powerplant
iTrader: (2)
Join Date: Apr 2012
Location: California
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
got my coilover set a couple days ago. i opened the rear spring set first, when i finished handling them i had blue paint all over my hands... the rear coils were all scratched up due to careless packaging, they were so scratched up i had to repaint them. awesome.
also, i ordered 150# rear coils but the coils themselves had a 125# sticker and the box had 150# written on it, i was confused... so i called re-speed... again. no one picked up so i left a message and amazingly sam called right away. according to sam they were 125# originally, then cut short to fit the perch effectively making them 150#. cool story, seems legit but the real question is do i go out of my way just to get them rated?
also, i ordered 150# rear coils but the coils themselves had a 125# sticker and the box had 150# written on it, i was confused... so i called re-speed... again. no one picked up so i left a message and amazingly sam called right away. according to sam they were 125# originally, then cut short to fit the perch effectively making them 150#. cool story, seems legit but the real question is do i go out of my way just to get them rated?
#172
Lives on the Forum
iTrader: (5)
got my coilover set a couple days ago. i opened the rear spring set first, when i finished handling them i had blue paint all over my hands... the rear coils were all scratched up due to careless packaging, they were so scratched up i had to repaint them. awesome.
also, i ordered 150# rear coils but the coils themselves had a 125# sticker and the box had 150# written on it, i was confused... so i called re-speed... again. no one picked up so i left a message and amazingly sam called right away. according to sam they were 125# originally, then cut short to fit the perch effectively making them 150#. cool story, seems legit but the real question is do i go out of my way just to get them rated?
also, i ordered 150# rear coils but the coils themselves had a 125# sticker and the box had 150# written on it, i was confused... so i called re-speed... again. no one picked up so i left a message and amazingly sam called right away. according to sam they were 125# originally, then cut short to fit the perch effectively making them 150#. cool story, seems legit but the real question is do i go out of my way just to get them rated?
I had to remove the bump stops (which you have to cut or remove them when lowering anyway) and max out the coil over adjusters.....
Now they are sitting in my junk box.
#173
'84 5-letter
iTrader: (5)
When I was in coastal BC it took 2 weeks to mail something to Seattle - 200 miles away.
I originally had plans to do the coilover setup, however it's looking like Techno Toy Tuning may be jumping into the FB tuner market as well - and they already have proper rear coilovers available.
Will be good to have some healthy competition in the market.