RE-Speed lack of communications

Thread Tools
 
Search this Thread
 
Old Mar 4, 2013 | 01:08 AM
  #151  
1st_gen7's Avatar
Airframe & Powerplant
iTrader: (2)
 
Joined: Apr 2012
Posts: 140
Likes: 1
From: California
still no response, still no communication, still no effin parts.

BEEN WAITING 6 MONTHS FOR MY ORDER AND COUNTING


o i cannot wait until the 9th!!!!!

Originally Posted by Re-Speed.com
Well I've finally been able to get my machinist switched over to another person and things should finally be back on track now.

I finally have all the parts ready for the oil fillers. All the oil filler orders should be shipped out tomorrow. (Have about 14 pieces)

The front coil over tops are being machined today and will be done later on today. (22 pieces of those will be done)

Front Big brake kit hub adapters are next on the list, then followed by the rear coil over parts. So if all goes well everyone will have all their parts shipped out by the end of next week!
Originally Posted by Re-Speed.com
So if all goes well everyone will have all their parts shipped out by the end of next week!
Originally Posted by Re-Speed.com
next week!
you posted this on valentines day for gods sake!

cool story sam, you do a real good job at crying wolf...
i wonder what your next excuse will be.

Last edited by 1st_gen7; Mar 4, 2013 at 01:19 AM.
Reply
Old Mar 7, 2013 | 02:04 AM
  #152  
1st_gen7's Avatar
Airframe & Powerplant
iTrader: (2)
 
Joined: Apr 2012
Posts: 140
Likes: 1
From: California
communication with sameer gets more interesting by the day...
Reply
Old Mar 7, 2013 | 04:31 PM
  #153  
mymmeryloss's Avatar
Oilfield Trash
Tenured Member 15 Years
iTrader: (13)
 
Joined: May 2005
Posts: 719
Likes: 1
From: Colorado
Hope you guys get your parts. I got a bunch of tiny stickers with my order... Interesting haha
Reply
Old Mar 7, 2013 | 09:29 PM
  #154  
Shredduuhh's Avatar
Brap Life
Tenured Member 05 Years
iTrader: (11)
 
Joined: Oct 2011
Posts: 192
Likes: 4
From: Rowland heights
he is all up on FB, why isn't he here? why is he still a vender here?
Reply
Old Mar 8, 2013 | 02:59 PM
  #155  
RedR1's Avatar
Out of order
Tenured Member 15 Years
iTrader: (5)
 
Joined: Nov 2001
Posts: 7,040
Likes: 0
From: somewhere
Still no response or parts shipped for a retired Marine i'm friends with, and it's been over 4 months. Worst experience ever
Reply
Old Mar 9, 2013 | 06:51 PM
  #156  
Re-Speed.com's Avatar
Banned. I got OWNED!!!
iTrader: (3)
 
Joined: Nov 2001
Posts: 2,483
Likes: 1
From: London, Ontario
So all the parts have finally been machined. That's brake kits and coil overs. The brake kits should all be shipped out Monday with the following tracking numbers:

www.usps.com #'s

Leaving Monday:

Andrew Jenkin - CX473987886CA
Armen Weis - CX473987890CA
Joseph Fister - CX473987912CA
Rob Winter - CX473987926CA

Leaving Mid this week: (The rear coil overs were dropped off to the plating place on Thursday and was told mid this week to pick them up)

Kevin Frank - CX494279551CA
Jack Norman - EE154233522CA
Russ Rosenburg - CX494279548CA
Jelena Antonievich - CC186014378CA
Jozey Hall - CX494279565CA
Brent Badulis - CX473987930CA

These are the numbers for all outstanding orders tracking numbers, and I should be all caught up now with that.
Reply
Old Mar 9, 2013 | 06:59 PM
  #157  
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Dec 2001
Posts: 1,271
Likes: 0
From: UK
Originally Posted by Re-Speed.com
So all the parts have finally been machined. That's brake kits and coil overs. The brake kits should all be shipped out Monday with the following tracking numbers:

www.usps.com #'s

Leaving Monday:

Andrew Jenkin - CX473987886CA
Armen Weis - CX473987890CA
Joseph Fister - CX473987912CA
Rob Winter - CX473987926CA

Leaving Mid this week: (The rear coil overs were dropped off to the plating place on Thursday and was told mid this week to pick them up)

Kevin Frank - CX494279551CA
Jack Norman - EE154233522CA
Russ Rosenburg - CX494279548CA
Jelena Antonievich - CC186014378CA
Jozey Hall - CX494279565CA
Brent Badulis - CX473987930CA

These are the numbers for all outstanding orders tracking numbers, and I should be all caught up now with that.
Does this list not Include Filler necks because my name isn't on there?
Reply
Old Mar 9, 2013 | 08:13 PM
  #158  
rx7roller02's Avatar
All out Freak!
Tenured Member 20 Years
 
Joined: Aug 2004
Posts: 2,300
Likes: 12
From: in a little box on a stick
Its a shame that it took me posting to your facebook account earlier tonight, informing you that a ban was coming unless you got back on this forum, to get a response, Sam. There is no need for this to be happening. I'm at least glad that you got some of these up, but what do we do about the rest?

EDIT--if anyone here is still waiting for parts from Sam and your name is not on the list he just posted, then please post here with the following info:

1--your name
2--what parts you ordered
3--how much you paid
4--when you paid

Thanks

Last edited by rx7roller02; Mar 9, 2013 at 08:16 PM.
Reply
Old Mar 10, 2013 | 08:01 PM
  #159  
84stock's Avatar
Lives on the Forum
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Apr 2003
Posts: 5,547
Likes: 12
From: calgary
Thanks Roller!
Reply
Old Mar 11, 2013 | 07:55 AM
  #160  
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Dec 2001
Posts: 1,271
Likes: 0
From: UK
To be fair i only ordered a Filler neck on the 22/2/2013 and i did know he was not the most reliable maybe wasn't that wise but its just one of those things, i bought an Xcessive LIM and my stock filler didn't fit so i wanted a decent alternative so i searched and found the Damian Breather thread so i decided that was the way to go . At the time he was replying to e-mails so i thought it was worth the risk. But that said i paid $230 inc shipping for a Filler neck so with it costing that much you would expect a bit better Customer service.

Anyway at least he's making an effort to clear his back log. Bit of a shocking it took threats to get anything from him....
Reply
Old Mar 11, 2013 | 08:48 AM
  #161  
JBF's Avatar
JBF
Senior Member
iTrader: (13)
 
Joined: Apr 2011
Posts: 605
Likes: 2
From: Willow Springs, CA
I got my filler neck a couple weeks ago. Just keep forgetting to post. It shipped the day he said it would.

Maybe now that he's caught up, he'll be more attentive.
Reply
Old Mar 11, 2013 | 11:34 AM
  #162  
GySgtFrank's Avatar
Senior Member
Tenured Member: 15 Years
iTrader: (4)
 
Joined: Dec 2010
Posts: 645
Likes: 196
From: Stafford, Ks.
Originally Posted by rx7roller02
EDIT--if anyone here is still waiting for parts from Sam and your name is not on the list he just posted, then please post here with the following info:

1--your name
2--what parts you ordered
3--how much you paid
4--when you paid

Thanks

**** poor that this has to be done on an open forum. My name is on the list for the coil over kit, but not the other stuff. I did receive the Moser axles right away, then nothing. Like I've said ad-nauseum, I just want a refund at this point for the rest as I had to source the parts elsewhere (when I got no parts and no response). That request has also been ignored. I don't believe that I'm out of line asking for a refund as the problem was all on the seller's end. This whole transaction will make me very leery of dealing with vendors again.

Kevin Frank
paid 20 Oct 2012

1 X 1978-1985 Rx7, Rear Coil Over Kit
Total289.99000 (Tax:$0.00)

1 X 1984 to 1985 Rear Axle Retainer Plates, Big Bearing Total39.99000 (Tax:$0.00)

1 X 1984 to 1985, Moser Axles, Pair (received)
Total365.00000 (Tax:$0.00)

1 X 1979-1985, Rear Lower Control Arm Kit. Total249.99000 (Tax:$0.00)

----------------------------------------------------------------
SHIPMENT FEE (ServiceShip DateDelivery DateExpedited US Business2012-10-222012-10-29 )
Total : $122.48 (Tax : $0.00)
PAYMENT FEE (Paypal / Credit Card )
Total:$0.00 (Tax : $0.00)
----------------------------------------------------------------

TOTAL : $1,067.45
(Tax : $0.00)
Reply
Old Mar 11, 2013 | 12:40 PM
  #163  
ioTus's Avatar
'84 5-letter
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Jul 2002
Posts: 3,219
Likes: 8
From: Washington State
Well I took the plunge - Monday March 11th 2013 - I ordered a Radiator Support / Cold Air Intake.

We'll see if anything comes. I figure I'll start small before sending him $2k for suspension.
Reply
Old Mar 11, 2013 | 02:48 PM
  #164  
mymmeryloss's Avatar
Oilfield Trash
Tenured Member 15 Years
iTrader: (13)
 
Joined: May 2005
Posts: 719
Likes: 1
From: Colorado
Originally Posted by ioTus
Well I took the plunge - Monday March 11th 2013 - I ordered a Radiator Support / Cold Air Intake.

We'll see if anything comes. I figure I'll start small before sending him $2k for suspension.
I dont see why people are sending him money still...

Theres more than one of these threads. I mean im happy with the oil neck, but it took forever and was the absolute worst customer service ever. I will not give my money to re-speed ever again. Good riddance
Reply
Old Mar 11, 2013 | 03:19 PM
  #165  
ioTus's Avatar
'84 5-letter
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Jul 2002
Posts: 3,219
Likes: 8
From: Washington State
Originally Posted by mymmeryloss

I dont see why people are sending him money still...

Theres more than one of these threads. I mean im happy with the oil neck, but it took forever and was the absolute worst customer service ever. I will not give my money to re-speed ever again. Good riddance
Yeah I know I just really want to believe I will get my parts as they are exactly what I need and you can't get them anywhere else.
Reply
Old Mar 12, 2013 | 05:44 PM
  #166  
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Dec 2001
Posts: 1,271
Likes: 0
From: UK
Thumbs up

Just had an E-mail saying my order has been shipped
Reply
Old Mar 14, 2013 | 01:57 PM
  #167  
ioTus's Avatar
'84 5-letter
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Jul 2002
Posts: 3,219
Likes: 8
From: Washington State
Ordered Monday march 11 - just got shipping notification Thursday march 14.

So far so good!

Geoff
Reply
Old Mar 14, 2013 | 06:39 PM
  #168  
JDK's Avatar
JDK
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
iTrader: (8)
 
Joined: Apr 2003
Posts: 2,205
Likes: 1
From: Mississauga,Ont Canada
Got my order....thanks Sam
Reply
Old Mar 14, 2013 | 07:24 PM
  #169  
dcpck's Avatar
Junior Member
iTrader: (1)
 
Joined: Apr 2012
Posts: 25
Likes: 0
From: British Columbia
Ordered my front big brake kit roughly two weeks ago and have been in communication with Sam via Facebook throughout the process. Everything was shipped today including custom spacers as I'm sticking with 4 bolt hubs. Thanks Sam!
Reply
Old Mar 18, 2013 | 02:27 AM
  #170  
1st_gen7's Avatar
Airframe & Powerplant
iTrader: (2)
 
Joined: Apr 2012
Posts: 140
Likes: 1
From: California
got my coilover set a couple days ago. i opened the rear spring set first, when i finished handling them i had blue paint all over my hands... the rear coils were all scratched up due to careless packaging, they were so scratched up i had to repaint them. awesome.

also, i ordered 150# rear coils but the coils themselves had a 125# sticker and the box had 150# written on it, i was confused... so i called re-speed... again. no one picked up so i left a message and amazingly sam called right away. according to sam they were 125# originally, then cut short to fit the perch effectively making them 150#. cool story, seems legit but the real question is do i go out of my way just to get them rated?
Reply
Old Mar 18, 2013 | 08:36 PM
  #171  
GySgtFrank's Avatar
Senior Member
Tenured Member: 15 Years
iTrader: (4)
 
Joined: Dec 2010
Posts: 645
Likes: 196
From: Stafford, Ks.
I did finally get my parts today. Now that I no longer need them. Took 5 months, but he has supposedly brought the machining in-house so this type of debacle doesn't happen again. The parts look very nice though.
Reply
Old Mar 18, 2013 | 10:18 PM
  #172  
84stock's Avatar
Lives on the Forum
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Apr 2003
Posts: 5,547
Likes: 12
From: calgary
Originally Posted by 1st_gen7
got my coilover set a couple days ago. i opened the rear spring set first, when i finished handling them i had blue paint all over my hands... the rear coils were all scratched up due to careless packaging, they were so scratched up i had to repaint them. awesome.

also, i ordered 150# rear coils but the coils themselves had a 125# sticker and the box had 150# written on it, i was confused... so i called re-speed... again. no one picked up so i left a message and amazingly sam called right away. according to sam they were 125# originally, then cut short to fit the perch effectively making them 150#. cool story, seems legit but the real question is do i go out of my way just to get them rated?
Can't wait to hear about the install on the rear coil overs.

I had to remove the bump stops (which you have to cut or remove them when lowering anyway) and max out the coil over adjusters.....

Now they are sitting in my junk box.
Reply
Old Mar 19, 2013 | 01:16 AM
  #173  
ioTus's Avatar
'84 5-letter
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Jul 2002
Posts: 3,219
Likes: 8
From: Washington State
Originally Posted by ioTus
Ordered Monday march 11 - just got shipping notification Thursday march 14.

So far so good!

Geoff
Box arrived today - top quality product, and fast shipping considering where it came from.

When I was in coastal BC it took 2 weeks to mail something to Seattle - 200 miles away.

I originally had plans to do the coilover setup, however it's looking like Techno Toy Tuning may be jumping into the FB tuner market as well - and they already have proper rear coilovers available.

Will be good to have some healthy competition in the market.
Reply
Old Mar 19, 2013 | 01:50 PM
  #174  
dcpck's Avatar
Junior Member
iTrader: (1)
 
Joined: Apr 2012
Posts: 25
Likes: 0
From: British Columbia
Big brake parts arrived today. Everything looks excellent. Thanks Sam!
Reply
Old Mar 19, 2013 | 04:40 PM
  #175  
mymmeryloss's Avatar
Oilfield Trash
Tenured Member 15 Years
iTrader: (13)
 
Joined: May 2005
Posts: 719
Likes: 1
From: Colorado
Good to see everyone is getting their parts...
Reply



All times are GMT -5. The time now is 02:26 AM.