Sequential Turbo AI Install
#51
Senior Member
iTrader: (1)
This is what I am planning on doing. Tapping the transition signal from the PFC.
I am going to interpose a Solid State Solenoid (SSN) to control the WI valve solenoid. The SSN has a very high impedance at the triggering circuit. I am using it for extra protection, in order not to increase the current through the PFC transistor switch. Others with more practical experience have indicated that it may not be necessary and that the WI valve solenoid could just be wired in parallel to the TCN valves.
I am going to interpose a Solid State Solenoid (SSN) to control the WI valve solenoid. The SSN has a very high impedance at the triggering circuit. I am using it for extra protection, in order not to increase the current through the PFC transistor switch. Others with more practical experience have indicated that it may not be necessary and that the WI valve solenoid could just be wired in parallel to the TCN valves.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM