SBG pump mount
#1
SBG pump mount
I found this neat looking pump mount that puts the pump out of the way and covered from road debris under the car. The only problem is, it does seem to fit. I think I may be missing some parts? I reached out to SBG and they suggested that there were spacers (which didn't come in the package), but maybe I'm just doing it wrong, and I'm looking to get some feedback from someone else that's installed this pump. The only difference between my car and the picture from SBG is that they're using some aftermarket control arms, possibly with a different bolt head. But that's where my pump 90 degree pushlock fitting is interfering with the control arm bolt. Now, I guess it could be a difference in pumps, but all aquatec/shurflow 5800 pumps are similar dimensions. The 5800 is what all the usual meth suspects are using (AEM/Snow/etc.)
SBG pump:
This is my pump bracket/pump.
This is with the Subframe bolt in pump bracket. (just out of frame, but you can see where the 90 degree pump fitting makes contact with the bolt).
SBG pump:
This is my pump bracket/pump.
This is with the Subframe bolt in pump bracket. (just out of frame, but you can see where the 90 degree pump fitting makes contact with the bolt).
Thread
Thread Starter
Forum
Replies
Last Post
BadAssRX-7
1st Generation Specific (1979-1985)
6
04-28-02 03:09 PM