Recommended AIs in 2011
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2011
Location: Bergen, Norway
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Recommended AIs in 2011
Hi.
After reading about a billion pages on do-this and do-thats, howtos and development of the 247000 different kits out there, my head is a mess.... Especially after re-reading alot of threads when i found out that i havent read em chronologically.... Also, you seem to love all the shortwords for different parts and expressions. Me as a norwegian is having abit of trouble keeping up with all the flow if info in here stacked into those mile-long threads... In short, i had a good old brainfart...
I bet its been answered before, but ill throw in a thread in hopes for a positive answer to what i need as waterinjection-kit in 2011.
I want to use waterinjection to increase safe boost on seq BNRs + all the additional mods needed. Im looking to max out the seq BNRs, so 400+rwhp should be abit under 500 in the motor. What nozzle do i need?
It has to tick the following boxes in this order:
Reliability
Mapping, i want to map the injectormap according to fuelmap in the PFC so they follow eachother all the way through the revband
Failsafing, electronical failsafing, as mechanical failsafing often works way too slow to prevent the dangerous pings.
Maintainability
price
What do you recommend and why? Price is the least prioritised aspect of it, i want to make this a fairly safe thing to use, and quality usually costs.
thanks
Øyvind
After reading about a billion pages on do-this and do-thats, howtos and development of the 247000 different kits out there, my head is a mess.... Especially after re-reading alot of threads when i found out that i havent read em chronologically.... Also, you seem to love all the shortwords for different parts and expressions. Me as a norwegian is having abit of trouble keeping up with all the flow if info in here stacked into those mile-long threads... In short, i had a good old brainfart...
I bet its been answered before, but ill throw in a thread in hopes for a positive answer to what i need as waterinjection-kit in 2011.
I want to use waterinjection to increase safe boost on seq BNRs + all the additional mods needed. Im looking to max out the seq BNRs, so 400+rwhp should be abit under 500 in the motor. What nozzle do i need?
It has to tick the following boxes in this order:
Reliability
Mapping, i want to map the injectormap according to fuelmap in the PFC so they follow eachother all the way through the revband
Failsafing, electronical failsafing, as mechanical failsafing often works way too slow to prevent the dangerous pings.
Maintainability
price
What do you recommend and why? Price is the least prioritised aspect of it, i want to make this a fairly safe thing to use, and quality usually costs.
thanks
Øyvind
Last edited by oyvindjs; 06-22-11 at 09:20 AM.
#2
Daily Used and Abused
iTrader: (1)
Join Date: Dec 2008
Location: South Florida
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
im using Alcohol injection systems. check it out. the pumps built in. http://www.alcoholinjectionsystems.c...duct_info.html
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM