i got ?'s about auxilary injections
1.can i put a water injection in a n/a fc ,if not meth injection?
2.how would this system work on a n/a fc ?
3.how is it activaded if its n/a,,, rpm,vaccum ?
2.how would this system work on a n/a fc ?
3.how is it activaded if its n/a,,, rpm,vaccum ?
alot of this info is in this forum section. but let me try to answer in my view of it. yes you can put it on your N/A but water wouldnt really do you much good, meth should give you "some" hp increase if you use enough. this is because water is used to detur detonation in the higher boost pressures it does not burn so it would just take performance away from your N/A. youd be better off just doing the water treatment every 2 months or so to keep your engine clean. meth on the other hand will give you a hp increase if you use enough of it being a fuel, but unless you have extremely high compression its really not warranted.
it seems with the n/a you would be able to get more performance else where. the way im looking at it you would just end up with a REALLY EXPENSIVE steam cleaner for your engine.
if anyone else has better info for AI/WI in N/A's im all ears
z
it seems with the n/a you would be able to get more performance else where. the way im looking at it you would just end up with a REALLY EXPENSIVE steam cleaner for your engine.
if anyone else has better info for AI/WI in N/A's im all ears
z
Joined: Oct 2001
Posts: 6,279
Likes: 728
From: Florence, Alabama
proz07, thanks for your help and you are correct. AI is meant to calm high CCP and NA doesn't generate high pressures so there is no need other than engine cleaning...
hc
hc
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM






