Hey guys,
so i just bought the aquamist hfs-3 with summer kit.
Just a little confused on where everyone else is putting there nozzles exactly....
What kind of mixture are you running
and what size nozzles are you running?

My injector sizes are 550/1600cc
also turbo is borg warner s366...

Any input would be great.

 

Go to the area of the forum for AI (where this will most likely be moved) and your questions will be answered with searching. =)

Good luck!

 

How much hp are you shooting for?
-I was shooting for 320rwhp and used a .7 I believe.
-I actually had to get the nozzle from another kit since I think the smallest I had was .8.
-Nozzle is screwed into the greddy elbow.
-I think I'm using 80/20 water/meth.

I'm using stock injector sizes. You have to make sure your summer is tuned to your injector sizes. Have you done that or has Richard done that for you?

 

http://www.waterinjection.info/

 

im shooting for a 500-550 hp...
Richard is actually taking very long to get back to my emails and is not helping me with the explanations too much...

as far as he told me i should place the nozzle anywhere 3-6 inches away from the exit of the I/C.
Now should i be using 2 nozzles as well?