Aquamist hfs-3 + summer kit help
Hey guys,
so i just bought the aquamist hfs-3 with summer kit. Just a little confused on where everyone else is putting there nozzles exactly.... What kind of mixture are you running and what size nozzles are you running? My injector sizes are 550/1600cc also turbo is borg warner s366... Any input would be great. |
Go to the area of the forum for AI (where this will most likely be moved) and your questions will be answered with searching. =)
Good luck! |
How much hp are you shooting for?
-I was shooting for 320rwhp and used a .7 I believe. -I actually had to get the nozzle from another kit since I think the smallest I had was .8. -Nozzle is screwed into the greddy elbow. -I think I'm using 80/20 water/meth. I'm using stock injector sizes. You have to make sure your summer is tuned to your injector sizes. Have you done that or has Richard done that for you? |
|
im shooting for a 500-550 hp...
Richard is actually taking very long to get back to my emails and is not helping me with the explanations too much... as far as he told me i should place the nozzle anywhere 3-6 inches away from the exit of the I/C. Now should i be using 2 nozzles as well? |
All times are GMT -5. The time now is 07:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands